L101-E1-05A (986758), страница 6
Текст из файла (страница 6)
The H5CX is also equipped with a DIP switch monitorfunction, a convenient function that enables the settings of the DIP switch pins to be confirmed using the front display.Power ONRun Mode1To change the mode to timer/twin timer selection mode, hold1 key for 1 s min. with the MODE key held down.down theThe MODE key must be pressed before the1 key.If the1 key is pressed first, the mode will not change.+Timer/Twin Timer Selection Mode11 s min.Timer/Twintimer selectionSelect either timer operation or twin timer operationusing thekeys.(Timer)(Twin timer)Note: The H5CX is factory-set for timer operation.DIP switchmonitorConfirm the status of DIP switch pins 1 to 8 usingthekeys.Note 1.
This display is not supported with H5CX-L8@.2. This display is only possible when DIP switch pin 1(DIP switch settings enable/disable) is set to ON (enable).Example12345678ONOFFIndicates that DIP switch pin 8 is ON.Indicates that DIP switch pin 7 is OFF.Indicates that DIP switch pin 6 is ON.Indicates that DIP switch pin 5 is OFF.Indicates that DIP switch pin 4 is ON.Indicates that DIP switch pin 3 is OFF.Indicates that DIP switch pin 2 is ON.Indicates that DIP switch pin 1 is ON.Note 1. When the mode is changed to timer/twin timer selection mode, the present value is reset and output turns OFF.
Timing operation is notperformed in timer/twin timer selection mode.2. Setting changes made in timer/twin timer selection mode are enabled when the mode is changed to run mode. If settings are changed, theHC5X is automatically reset (present value initialized, output turned OFF).Multifunction Digital Timer H5CX-A/-L31Additional Information■ Using the Operation KeysTimer OperationOperation stoppedPower ONCan be in operation1+1 s min.3 s min.Timer/twin timer selection modeRun mode1+1 s min.Timer (Except for Z mode)Function setting mode3 s min.Time rangeTimer/twin timer selectionPV/SVDIP switch monitorTimer modeTimer (Z mode)Output modePV/ON duty ratioOutput timePV/cycle timeInput signal widthNPN/PNP input modeDisplay colorKey protect levelTwin Timer OperationOperation stoppedPower ONCan be in operation1+3 s min.1 s min.Timer/twin timer selection modeRun modeFunction setting mode1+3 s min.1 s min.Timer/twin timer selectionPV/OFF set timeOFF time rangeDIP switch monitorPV/ON set timeON time rangeTimer modeTwin timer output modeInput signal widthNPN/PNP input modeDisplay colorKey protect levelNote 1.
All setting changes are performed using theandkeys.2. The above flowcharts outline the procedure for all models. For details on specific models, refer to page 19 (timer operation) or page 27(twin timer operation).32Multifunction Digital TimerH5CX-A/-L■ List of SettingsFill in your set values in the set value column of the following tables and utilize the tables for quick reference.Timer/Twin Timer Selection ModeParameternameParameterSetting rangeDefault valueUnitTimer/Twin Tim- funcer selectiontim/twintim---DIP switch moni- diptoron/offoff---Set valueSettings for Timer OperationRun Mode when Output Mode Is Not ZParameter namePresent value,set valueParameterSet valuePresent valueSetting rangeDefault valueUnit---0.00 to 99.99 (Time range: --,--s)0.00s---0.0 to 999.9 (Time range: ---,-s)0.0s---0 to 9999 (Time range: ----s)0s---0:00 to 99:59 (Time range: --min--s)0:00min; s---0.0 to 999.9 (Time range: ---,-min)0.0min---0 to 9999 (Time range: ----min)0min---0:00 to 99:59 (Time range: --h--min)0:00h; min---0.0 to 999.9 (Time range: ---,-h)0.0h---0 to 9999 (Time range: ----h)0h---0.000 to 9.999 (Time range: -,---s)0.000s---Same as set valueSame as leftSame as leftSet valueRun Mode when Output Mode = ZParameter namePresent value,ON duty ratioPresent value,cycle timeCycle timeParameter---Setting rangeDefault valueUnit0.00 to 99.99 (Time range: --,--s)0.00s---0.0 to 999.9 (Time range: ---,-s)0.0s---0 to 9999 (Time range: ----s)0s---0:00 to 99:59 (Time range: --min--s)0:00min; s---0.0 to 999.9 (Time range: ---,-min)0.0min---0 to 9999 (Time range: ----min)0min---0:00 to 99:59 (Time range: --h--min)0:00h; min---0.0 to 999.9 (Time range: ---,-h)0.0h---0 to 9999 (Time range: ----h)0h---0.000 to 9.999 (Time range: -,---s)0.000sON duty ratio---0 to 1000%Present value---Same as cycle time aboveSame as leftSame as leftPresent value---Same as cycle time aboveSame as leftSame as leftSet valueFunction Setting ModeParameter nameParameterSetting rangeDefaultvalueUnitTime rangetimr--.--s/---.-s/----s/--min--s/---.-min/----min/-h--min/---.-h/----h/-.---s--.--sTimer modetimmup/downup---Output modeoutma/a-1/a-2/a-3/b/b-1/d/e/f/=a---Output timeotimhold/0.01 to 99.99holdsInput signal widthiflt20ms/1ms20ms---NPN/PNP input modeimodnpn/pnpnpn---Display colorcolrred/org/r-o/o-rred---Key protect levelkyptkp-1/kp-2/kp-3/kp-4/kp-5kp-1---Set value---Multifunction Digital Timer H5CX-A/-L33Settings for Twin Timer OperationRun ModeParameter namePresent value,OFF set timeOFF set timePresent valuePresent value,ON set timeParameterSetting range0.00 to 99.99 (Time range: --,--s)---Default value0.00UnitSet values---0.0 to 999.9 (Time range: ---,-s)0.0s---0 to 9999 (Time range: ----s)0s---0:00 to 99:59 (Time range: --min--s)0:00min; s---0.0 to 999.9 (Time range: ---,-min)0.0min---0 to 9999 (Time range: ----min)0min---0:00 to 99:59 (Time range: --h--min)0:00h; min---0.0 to 999.9 (Time range: ---,-h)0.0h---0 to 9999 (Time range: ----h)0h---0.000 to 9.999 (Time range: -,---s)0.000s---Same as OFF set time aboveSame as leftSame as leftON set time---Same as OFF set time aboveSame as leftSame as leftPresent value---Same as OFF set time aboveSame as leftSame as leftFunction Setting ModeParameter nameParameterSetting rangeDefaultvalueUnitOFF time rangeoftr--.--s/---.-s/----s/--min--s/---.-min/----min/--h--min/---.-h/----h/-.---s--.--s---ON time rangeontr--.--s/---.-s/----s/--min--s/---.-min/----min/--h--min/---.-h/----h/-.---s--.--s---Timer modetimmup/downup---ON/OFF start modetotmtoff/tontoff---Input signal widthiflt20ms/1ms20ms---NPN/PNP input modeimodnpn/pnpnpn---Display colorcolrred/grn/r-g/g-rred---Key protect levelkyptkp-1/kp-2/kp-3/kp-4/kp-5kp-1---34Multifunction Digital TimerH5CX-A/-LSet value2-stage Digital TimerH5CX-BDIN 48 ´ 48-mm Digital Timer with 6-digitDisplay and Forecast Output• Times the daily operating hours of machinery and tools, predicting and notifying when maintenance is required.• The 2-stage settings and forecast output are ideal for maintenance applications.• All settings can be performed easily with a DIP switch.• PNP/NPN switchable DC-voltage input.ContentsModel Number Structure .............................................................
36Ordering Information.................................................................... 36Specifications .............................................................................. 37Connections................................................................................. 39Nomenclature .............................................................................. 42Dimensions..................................................................................
43Operating Procedures ................................................................. 442-stage Digital TimerH5CX-B35Model Number Structure■ Model Number LegendH5CX-BWSD1 2 3 41. Type classifierB:6-digit display type2. Stage settingW:2-stage setting3. Output typeS:Transistor output4. Supply voltageD:12 to 24 VDCOrdering Information■ List of ModelsOutput typeSupply voltage6-digit displayScrew terminalsTransistor12 to 24 VDCH5CX-BWSD■ Accessories (Order Separately)NameModelsFlush Mounting Adapter (See note.)Y92F-30Waterproof Packing (See note.)Y92S-29Hard CoverY92A-48Soft CoverY92A-48F1Note: Supplied with H5CX-BWSD.362-stage Digital TimerH5CX-BSpecifications■ RatingsItemH5CX-BWSDClassificationDigital timerRated supply voltage12 to 24 VDC (permissible ripple: 20% (p-p) max.)Operating voltage range90% to 110% rated supply voltagePower consumption(See note 1.)Approx.
2.3 W at 12 VDCMounting methodFlush mountingExternal connectionsScrew terminalsTerminal screw tighteningtorque0.5 N·m max.Display (See note 2.)7-segment, negative transmissive LCD;Present value: 9-mm-high characters, redSet value: 6-mm-high characters, greenDigits6 digitsTime ranges9999.99 s (0.01-s unit), 99 h 59 min 59 s (1-s unit), 99999.9 min (0.1-min unit), 99999.9 h (0.1-h unit)Timer modeElapsed time (Up)Input signalsSignal, reset, gateInput methodNo-voltage input/voltage input (switchable)No-voltage InputON impedance: 1 kW max.