NT support tool (V053-E1-1) (986753)
Текст из файла
Cat.No. V053–E1–1NT-seriesSupport Tool for Windows 95/98 Ver. 3.0OPERATION MANUALNT-seriesSupport Tool for Windows 95/98 Ver. 3.2Operation ManualProduced September 1999iiiSafety Precaution:Read the safety precaution carefully and make sure you understand it before using the programmableterminal so that you can use it safely and correctly.CAUTIONDo not use input functions such as PT touch switches for applicationswhere danger to human life or serious property damage is possible orfor emergency switch applications.CAUTIONCarefully check the operation of all screen data and host programsbefore using them.
If incorrect, the system may operate unpredictably.Otherwise the system may operate unpredictably.CAUTIONWhen the numeral values entered are confirmed, upper/lower limitsare checked. Otherwise the system may operate unpredictably.CAUTIONWhen transferring the data in units of screens, if there are changes inmemory table and /or direct access, transfer such data along with thescreen data.Otherwise the system may operate unpredictably.vOMRON Product ReferencesAll OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to anOMRON product, regardless of whether or not it appears in the proper name of the product.The abbreviation “Ch,” which appears in some displays and on some OMRON products, often means“word” and is abbreviated “Wd” in documentation in this sense.The abbreviation “PC” means Programmable Controller and is not used as an abbreviation for anythingelse.[Numeral settings]Each Support Tool screen displays options for functions to be set.
The example to the left showssuch an option, “Numeral settings”.<Example screens>The example screens that appear in this manual are mainly those of NT31C–V1.Note that the contents of the screens of other models may differ somewhat from the examples.Visual AidsThe following headings appear in the left column of the manual to help you locate different types of information.Note1, 2, 3...Indicates information of particular interest for efficient and convenient operationof the product.1. Indicates lists of one sort or another, such as procedures, checklists, etc.E OMRON, 1999All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in anyform, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON.No patent liability is assumed with respect to the use of the information contained herein.
Moreover, because OMRONis constantly striving to improve its high-quality products, the information contained in this manual is subject to changewithout notice. Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes noresponsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.TrademarksMicrosoftR, MS–DOSR, WindowsR and Windows NTR are either registered trademarks or Trademarks of MicrosoftCorporation in the United States and/or other countries.PLC names of MELSEC FX, A series and FX–2PIF of MELSEC F series are registered trademarks of Mitsubishi Electric Corporation.Hewlett–Packard, HP, PCL and Laser Jet are registered trademarks of Hewlett–Packard Company.viTABLE OF CONTENTSSECTION 1Introduction to the Support Tool . .
. . . . . . . . . . . . . . . . . .1-11-21-31-41-51-6What Is Support Tool? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Equipment Necessary for Using the Support Tool . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .General Configuration of the Support Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3-1 Outline of Screen Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3-2 Correspondence to PC (PLC) Data . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .1-3-3 Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3-4 Types of Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . .Basic Operation Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Menu Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Usable Hardware Combinations . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6-1 Applicable PT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6-2 Communication method for each PT type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SECTION 2Setting Up the Support Tool . . . . . . . . . . . . . . . . . . . . . . .
.2-12-2Before Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Installing the Support Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2-1 Basic Installation Operation . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2-2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2-3 Uninstall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .SECTION 3Support Tool Starting-up and Exiting Procedureand File Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-13-23-3Starting-up and Exiting the Support Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . .3-1-1 Start-up Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1-2 Exit Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User Interface . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2-1 Functions Provided in the Main Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2-2 Major Functions of Dialog Boxes . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .3-2-3 Functions of Message Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operation of Screen Data (Application) File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3-1 Creating New Screen Data (Application) File . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3-2 Reading the Existing Screen Data (Application) File . . . . . . . . . . . .
. . . . . . . . .3-3-3 Saving the Screen Data (Application) File . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3-4 Closing the Screen Data (Application) File . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3-5 Importing (Reading) the DOS Version Screen Data (Application) File . . . . . . .3-3-6 Importing Components from Different Screen Data File(Starting Up the Second Support Tool) . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .3-3-7 Using Method of Parts Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SECTION 4Application Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1What Is the Application Manager? . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .127881117192223282829313234343540414242434444485051515960626364687172vii4-2Operating the Application Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2-1 Opening a Data Creation Screen .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2-2 Closing a Creation Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2-3 Creating a New Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Характеристики
Тип файла PDF
PDF-формат наиболее широко используется для просмотра любого типа файлов на любом устройстве. В него можно сохранить документ, таблицы, презентацию, текст, чертежи, вычисления, графики и всё остальное, что можно показать на экране любого устройства. Именно его лучше всего использовать для печати.
Например, если Вам нужно распечатать чертёж из автокада, Вы сохраните чертёж на флешку, но будет ли автокад в пункте печати? А если будет, то нужная версия с нужными библиотеками? Именно для этого и нужен формат PDF - в нём точно будет показано верно вне зависимости от того, в какой программе создали PDF-файл и есть ли нужная программа для его просмотра.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
