ZEN-SOFT01-V3 ZEN Support Software_Operation Manual (986766)
Текст из файла
ZEN-SOFT01-V3Cat.No.W386-E1-03ZEN-SOFT01-V3 ZEN Support SoftwareOperation ManualRevised April 2003ivNotice:OMRON products are manufactured for use according to proper procedures by aqualified operator and only for the purposes described in this manual.The following conventions are used to indicate and classify precautions in this manual. Always heed the information provided with them. Failure to heed precautionscan result in injury to people or damage to property.!DANGERIndicates an imminently hazardous situation which, if not avoided, willresult in death or serious injury.!WARNING Indicates a potentially hazardous situation which, if not avoided, couldresult in death or serious injury.!CautionIndicates a potentially hazardous situation which, if not avoided, mayresult in minor or moderate injury, or property damage.Software CopyrightThe ZEN Support Software (referred to as “the software”) is sold under the assumption that the purchaser agrees to the following conditions.
If you do not agree, pleasereturn the software to the location from which you purchased it.1.CopyrightThe copyright to the software and all related programs and documentation belongs to OMRON Corporation.2.Range of ApplicationThe customer is entitled to copy the software to one computer forapplication of the software on that computer.3.CopyingWith the exception of the above range of application, the customer may not copy all or part of the software for any purpose.4.Software ModificationsThe customer may alter the software for his own application, butunder no means will OMRON take responsibility for any problemsor damages that result from such alteration.5.DistributionThe customer may in no way give, loan, or allow any third partyto use the software.6.Exception of ResponsibilityOMRON is in no way responsible for direct, indirect, or extendeddamages resulting from defects in the software.
OMRON is in noway responsibly for any damages resulting from the application ofthe software. In the event that OMRON is held responsible fordamages, such responsibility shall be limited to the purchaseprice of the software.vOMRON Product ReferencesAll OMRON products are capitalized in this manual. The word “Unit” is also capitalized when it refers to an OMRON product, regardless of whether or not it appears inthe proper name of the product.Visual AidsThe following headings appear in the left column of the manual to help you locate different types of information.Note1,2,3...PrecautionIndicates information of particular interest for efficient and convenientoperation of the product.1.Indicates lists of one sort or another, such as procedures, checklists, etc.Indicates precautionary information that should heeded in using theZEN. OMRON, 2001All rights reserved.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying,recording, or otherwise, without the prior written permission of OMRON.No patent liability is assumed with respect to the use of the information contained herein.Moreover, because OMRON is constantly striving to improve its high-quality products, theinformation contained in this manual is subject to change without notice. Every precautionhas been taken in the preparation of this manual.
Nevertheless, OMRON assumes noresponsibility for errors or omissions. Neither is any liability assumed for damages resultingfrom the use of the information contained in this publication.viTABLE OF CONTENTSPRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi12345Intended Audience . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Application Precautions . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Support Software Version Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiixiixiixiiixivSECTION 1Installation and Startup . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . 11-11-21-31-4Before Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Installing and Uninstalling ZEN Support Software . . . . . . . . . . . . . . . . . . . .Starting and Quitting . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .Screen Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2356SECTION 2Creating Ladder Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112-12-22-32-42-52-62-7Circuit Diagrams and Ladder Programs . . . .
. . . . . . . . . . . . . . . . . . . . . . . .Inputting Ladder Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Checking Ladder Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Editing Ladder Programs . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .Editing Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Saving Ladder Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Printing Ladder Programs . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .12152223333435SECTION 3Transferring and Monitoring Programs . . . . . . . . . . . . . . . . . . . .393-13-23-33-43-53-63-73-83-9Connecting the ZEN and Communications Settings . . . . . . . . . . . . . . . . . . .Connecting Online . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transferring Programs to the ZEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transferring Programs from the ZEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Verifying Programs with ZEN . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Operating and Stopping the ZEN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Monitoring Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Setting and Resetting Inputs . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .Clearing Errors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .404243444546464849viiTABLE OF CONTENTSSECTION 4System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . 514-14-24-34-4ZEN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Setting a Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Protecting Programs . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Clearing ZEN Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56SECTION 5Simulation Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 575-15-25-35-4Starting and Stopping the Simulation Function . . . .
. . . . . . . . . . . . . . . . . . . 58ZEN Image Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Present Value List Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Clock Display. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62SECTION 6Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 636-16-26-3Online Errors and Warnings . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 64Program Check Errors and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Protect Setting and Clearing Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66AppendixAShortcut Keys and Hot Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . 67Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69viiiAbout this Manual:This manual describes the installation and operation of the ZEN-SOFT01 ZENSupport Software and includes the sections described below.Please read this manual carefully and be sure you understand the informationprovided before attempting to install or operate the ZEN Support Software.
Besure to read the precautions provided in the following section.Precautions provides general precautions for using the ZEN Support Softwareand related devices.Section 1 describes how to install and start the ZEN Support Software. Thescreen configuration is also explained, along with the submenus for the MenuBar, Toolbar, and Status BarSection 2 describes how to create, save, edit, and print ladder programsSection 3 describes how to connect to the ZEN and how to transfer programsbetween the ZEN and the ZEN Support SoftwareSection 4 describes ZEN system settings, how to set passwords to protectZEN ladder programs, and how to clear the ZEN memorySection 5 describes the simulation function, which can be used to simulate ladder program execution without downloading the program to the ZEN.Section 6 describes errors that may occur while using the ZEN Support Software and possible countermeasures.The following two manuals are provided for the ZEN Programmable Relays.Refer to them as required in operation.ManualContentsCat.
No.ZEN Programmable Relays ZEN specifications, functions, and operat- W385Operation Manualing methods.ZEN Support SoftwareOperation ManualInstallation and operating procedures forthe ZEN Support SoftwareW386Note On the ZEN Support Software displays bits in ZEN memory arecalled “relays,” program input bits are called “contacts,” and program output bits are called “coils.”!WARNING Failure to read and understand the information provided in this manual mayresult in personal injury or death, damage to the product, or product failure.Please read each section in its entirety and be sure you understand the information provided in the section and related sections before attempting any ofthe procedures or operations given.ixPRECAUTIONSThis section provides general precautions for using the ZEN Support Software for the ZENProgrammable Relays.The information contained in this section is important for the safe and reliable applicationof the ZEN.
Характеристики
Тип файла PDF
PDF-формат наиболее широко используется для просмотра любого типа файлов на любом устройстве. В него можно сохранить документ, таблицы, презентацию, текст, чертежи, вычисления, графики и всё остальное, что можно показать на экране любого устройства. Именно его лучше всего использовать для печати.
Например, если Вам нужно распечатать чертёж из автокада, Вы сохраните чертёж на флешку, но будет ли автокад в пункте печати? А если будет, то нужная версия с нужными библиотеками? Именно для этого и нужен формат PDF - в нём точно будет показано верно вне зависимости от того, в какой программе создали PDF-файл и есть ли нужная программа для его просмотра.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
