NT support tool (V053-E1-1) (986753), страница 49
Текст из файла (страница 49)
10 and N0. 11 as child screens of screen No. 2. Screen No. 2is regarded as a parent screen of an overlapping screen. (Refer to 5-3-2 “Overlapping Screens”.)(1) Select [Screen] (menu bar) → [New].(2) In the screen type designation dialog box, select “Parent Screen” and click on.(3) In the setting dialog box of a parent screen, set the displayed items as shownbelow.Parent Screen2TypeOverlapping(4) Specify “10” in the standard screen box and click on.(5) Specify “11” in the standard screen box and click on.(6) Click on392Screen No..Creating the Sample Data9-3-9Section 9-3Creating the Set ScreenCreate screen No. 3 (new screen) as the Set Screen.(1) Select [Screen] (menu bar) → [New].(2) At the screen selection dialog box, set “Standard Screen”.(3) At the new standard screen dialog box, set “3” for the screen No.Setting the screen properties(1) Select [Screen] (menu bar) → [Properties].(2) Set the screen properties as shown below for screen No.
3.AttributesScreen No.3HistorynTitleSet ScreenCommentSet ScreenBuzzerLoad Local 1 (Keyboard)System KeypadColourGridBackgroundBlackGrid SizeCustomHorizontal Spacing: 5Vertical Spacing:5Display GridnSnap to GridnCreating the screen title ([Set Screen])S Copying the screen title from screen No. 1 (Menu Screen)(1) Copy the “Menu Screen” (character) string and its frame (rectangle) onscreen No. 1 and paste them onto screen No.
3.(2) Adjust the display position of the pasted (character) string and frame to thedesired position.393Creating the Sample DataSection 9-3S Modifying to [Set Screen](3) Double click the “Menu Screen” (character) string and modify the propertiesas shown below. Note that other properties must be left unchanged.DescriptionSet Screen(4) Adjust the size of the frame (rectangle).Creating the data input field ([Numeral Input 1])S Setting the title(1) Select [Objects] (menu bar) → [Fixed Display] → [Text].(2) Click the mouse with the mouse cursor set at the position where the datadisplay field title is to be displayed (at the intended upper left corner).(3) Set the properties as shown below.Numeral Input 1DescriptionPosition––Font TypeStandardScale1SmoothingnAttributeStandardColour2 (High)ForegroundWhiteBackgroundTransparent(4) Adjust the position of “Numeral Input 1” on the data creation screen by dragging it.S Creating the data input field(5) Select [Objects] (menu bar) → [Data Input] → [Numeral].
(Refer to 6-4-1“Numeral Input”.)(6) Click the mouse with the mouse cursor set at the position where the datainput field is to be displayed (at the intended upper left corner).(7) At the cursor moving touch switch use selection dialog box, set the displayed items as shown below.Create Cursor Move Touch Switch394nCreating the Sample DataSection 9-3S Setting the numeral input field(8) Set the properties as shown below.GeneralPositionFont TypeStandardScale2SmoothingnAttributeStandardColourSettings––2ForegroundWhiteBackgroundBlackTable Entry10Display TypeDecimalFormatLimitInteger8Decimal0Maximum99999999Minimum0Zero SuppressionnDisplay SignnFocus FramenFocus AttributeStandardS Setting the cursor moving touch switch(9) Double click on the touch switch area (dotted line frame) created at the numeral input field position and set the properties as shown below.If selection of the touch switch is not easy, choose [Select Object] from [Edit]menu and select the touch switch from the list.395Creating the Sample DataSection 9-3GeneralPosition––Size––LabelFramenShapeStandardShow ON StatenColourSettingsFrameWhiteONWhiteOFFTransparentFunctionCursor MoveUse Window/Keyboard ScreennScreen No.1900Auto Arrange *1LightFunctionAddressPC (PLC) Address––I/O Comments––Lamp Attribute*1:LightUncheck the check mark for “Auto Arrange”.
Otherwise, it is not possible to change the position of each numeral input and touch switch.S Adjusting the size and position of numeral input 1 input field and the touch switch(10) Specify only the touch switch area and adjust the size and the position.(11) Specify only the numeral input field and adjust the size and the position.Creating the numeral input field ([Numeral Input 2])S Copying and pasting the numeral input field ([Numeral Input 1])(1) Copy “Numeral Input 1” (character) string, numeral display field, and touchswitch and paste them to the data creation screen.(2) Move the (character) string, numeral display field, and touch switch pastedat the upper left area of the screen to the desired position (for displaying [Numeral Input 2]).(3) Double click the “Numeral Input 1” (character) string and modify the properties as shown below.
Note that other properties must be left unchanged.DescriptionNumeral Input 2(4) Double click the data input field ([0] displayed) and modify the propertiesas shown below. Note that other properties must be left unchanged.Settings396Table Entry11Creating the Sample DataSection 9-3Creating the thumbwheel switchS Creating the title(1) Select [Objects] (menu bar) → [Fixed Display] → [Text].(2) Click the mouse with the mouse cursor set at the position where the title is tobe displayed (at the intended upper left corner of text).(3) Set the properties as shown below.DescriptionThumbwheelPosition––Font TypeStandardScale1SmoothingnAttributeStandardColour2 (High)ForegroundWhiteBackgroundBlack(4) Adjust the position of “Thumbwheel” on the data creation screen by dragging it.S Creating the thumbwheel switch(5) Select [Objects] (menu bar) → [Data Input] → [Thumbwheel Switch].(Refer to 6-4-3 “Thumbwheel Switch”.)(6) Click the mouse with the mouse cursor set at the position where the thumbwheel switch is to be displayed (at the intended upper left corner of thumbwheel).397Creating the Sample DataSection 9-3(7) Set the properties as shown below.GeneralPositionSizeMediumAttributeStandardEnd PlatenThumbwheelColourCharacterColourSettings––FrameWhiteForegroundWhiteBackgroundBlackForegroundWhiteBackgroundBlackTable Entry12Display TypeDecimalFormatLimitInteger4Decimal0Maximum999MinimumF0009999Display signn(8) Adjust the position of the thumbwheel switch on the data creation screen bydragging it.Creating the [Start] button and the [Stop] buttonS Creating the [Start] button frame(1) Select [Objects] (menu bar) → [Touch Switch](2) Create the [Start] button frame by dragging the mouse at the button displayposition.(3) Set the properties as shown below.398Creating the Sample DataSection 9-3GeneralPosition––Size––Labeln, Start (refer tothe following) *1FramenShapeShadowShow ON StateColourSettings––FrameWhiteONWhiteOFFTransparentFunctionAddressNotify BitPC (PLC) AddressL0000100I/O CommentsStart SwitchAction TypeLightFunctionAddressLamp Attribute*1:MomentaryPC (PLC) AddressL0000200I/O CommentsStart lampGeneralLightPressto set the label.After completing the setting, go to the next step without clicking onbutton.(4) Pressin the general property of a touch switch and set the labelproperties as shown below.DescriptionStartPosition––Font TypeStandardScale1SmoothingnAttributeStandardColourClick on2 (High)ForegroundWhiteBackgroundBlack, (returns to touch switch property) then click onagain.S Adjusting the size and position of [Start] button(5) Specify the [Start] button and select [Edit] (menu bar) → [Edit Object].(6) Adjust the size and position of [Start] button frame.(7) Adjust the position of the label “Start” by dragging it.399Creating the Sample DataSection 9-3S Creating the [Stop] button(8) Copy the [Start] button and paste it on the data creation screen.(9) Move the [Start] button pasted at the upper left area of the screen to the[Stop] button position.(10) Double click the moved button and modify the properties as shown below.Note that other properties must be left unchanged.n, Stop *1GeneralLabelSettingsAddressLightFunction*1:PressAddressPC (PLC) AddressL0000101I/O CommentsStop SwitchPC (PLC) AddressL0000201I/O CommentsStop lampto set the label.Creating the character string display field ([String Display])S Setting the title(1) Select [Objects] (menu bar) → [Fixed Display] → [Text].(2) Click the mouse with the mouse cursor set at the position where the “StringDisplay” (character) string is to be displayed (at the intended upper left corner of text).(3) Set the properties as shown below.DescriptionString DisplayPosition––Font TypeStandardScale1SmoothingnAttributeStandardColour2 (High)ForegroundWhiteBackgroundBlack(4) Adjust the position of the “String Display” on the data creation screen bydragging it.400Creating the Sample DataSection 9-3S Creating the (character) string display field(5) Select [Objects] (menu bar) → [String Display].(6) Click the mouse with the mouse cursor set at the position where the character string display field is to be displayed (at the intended upper left corner ofstring display field).(7) Set the properties as shown below.GeneralPositionFont TypeStandardScale1SmoothingnAttributeStandardColourSettings––Reference2 (High)ForegroundWhiteBackgroundBlackIndirectReferenceTable EntryLength020(8) Adjust the position of the (character) string display field by dragging it.S Creating the (character) string display field frame(9) Select [Objects] (menu bar) → [Fixed Display] → [Rectangle].(10) On the data creation screen, drag the “rectangle” so that it encloses thecharacter string display field.(11) Use the properties as they are.(12) Adjust the size and the position of the frame (rectangle).Creating the [Auto] button, [Man.] button, [Step] button, and [Reset] buttonS Creating the [Auto] button frame(1) Select [Objects] (menu bar) → [Touch Switch]401Creating the Sample DataSection 9-3(2) Create the [Auto] button frame by dragging the mouse at the button displayposition.(3) Set the properties as shown below.GeneralPosition––Size––Labeln, Auto (refer tothe following) *1FramenShapeShadowShow ON StatenColourSettingsFrameWhiteONWhiteOFFTransparentFunctionCopy FromCopy SettingNumeral TablenString TableCodeEntry (Text Box)Copy To10Numeral TablenString TableCursor PositionEntry (Text Box)LightFunctionAddressLamp Attribute*1:0PC (PLC) Address––I/O Comments––On TypeLightPressto set the label.After completing the setting, go to the next step without clicking onbutton.S Setting the label of [Auto] buttonin the general property of a touch switch and set the label(4) Pressproperties as shown below.DescriptionAutoPositionFont TypeStandardScale1SmoothingnAttributeStandardColour402––2 (High)ForegroundWhiteBackgroundBlackCreating the Sample DataSection 9-3Click on, (returns to touch switch property) then click onagain.S Adjusting the size and position of [Auto] button(5) Specify the [Auto] button and select [Edit] (menu bar) → [Edit Object].(6) Adjust the size and position of [Start] button frame.(7) Adjust the position of the label “Auto” by dragging it.S Creating the [Man.] button(8) Copy the [Auto] button and paste it onto the data creation screen.(9) Move the [Auto] button pasted at the upper left area of the screen to the[Man.] button position.(10) Double click the moved button and modify the properties as shown below.Note that other properties must be left unchanged.n, Man.