NT support tool (V053-E1-1) (986753), страница 19
Текст из файла (страница 19)
Note that continuous screens cannot be used with NT31,NT31C, NT631, and NT631C. To obtain the same effect as a continuous screenwith these PT models, use the touch switch which is assigned the switch screenfunction.Reference: The application manager displays a parent screen as a folder as shown below andchild screens are displayed when the folder is opened.For NT11S, parent screen setting is not possible.5-3-1Continuous ScreensTwo to eight screens can be registered for one continuous screen. The basescreen where multiple screens are registered is called a “parent screen” and multiple screens registered to the parent screen are called “child screens.”Screen No. 10ParentscreenScreen No. 20Continuousscreen 1[[]]Screen No. 15Continuousscreen 2[][]Screen No.
1Continuousscreen 3When screen No. 10 is specified, the first continuous screen, screen No. 20, is displayed. Pressing touch switch [ ↓ ] changes the screen to screen No. 15. Pressingthe touch switch again changes the screen to screen No. 1.Since the screen of screen No. 10 is set for continuous screen, it cannot be displayed independently.Screens set as continuous screens are switched by the pressing of the touchswitches [ ↓ ] and [ ↑ ], for which system key functions are allocated.In the parent screen setting dialog, show page number can be set or reset to indicate currently activated child screen number out of total pages on the upper rightcorner of the parent screen.Child screens should be created on standard screens in advance.101Continuous/Overlapping ScreensSection 5-3Continuous screens are set in the procedure described below.(1) Create child screens using standard screens.(2) Specify [Parent Screen] from [New] command in [Screen] menu.(3) In the parent screen setting dialog box, set a parent screen number, childscreen numbers, and whether or not a page number is displayed.a.Set the number of the parent screen for [Screen No.] in [Parent].If the number of screen data has been already created, it cannot be registered as a parent screen.b.Select [Continuous].c.If necessary, tick [Show Page Number].d.Specify child screens.Select screens which are specified as child screens by selecting themfrom the [Standard] field, then click on.The selected screen moves to the [Child] field.
If a wrong number is: the screen returns from the [Child] field to themoved, click on[Standard] field.Two to eight screens can be registered as child screens.e.Modify the screen switching order.Child screens are displayed in the order they are set in the [Child] field.The setting order of the child screens can be modified using.f.Click onandafter the completion of child screen setting.When creating continuous screens with NT20S and NT600S, it is recommended to create “Switch Screen” touch switch.102Continuous/Overlapping Screens5-3-2Section 5-3Overlapping ScreensOverlapping screen allows two to eight screens to be displayed in one screen.
(ForNT31, NT31C, NT631, NT631C, one to eight screen can be set.) The base screenof an overlapping screen is called a parent screen and multiple screens which arethe constituents of an overlapping screen are called child screens.This is anScreen No.
10(child screen)Screen No. 8(parent screen)This is anexample of anoverlappingscreen.example of anoverlappingscreen.Screen No. 7(child screen)Screen No. 25(child screen)When screen No. 8 (parent screen) is specified, the elements set on the screensNo. 10, No. 7, and No. 25 are overlapped for display on the parent screen.Since the screen of screen No. 8 is set for an overlapping screen, it cannot be displayed independently.In the setting for a parent screen, screen numbers of a parent and child screens areset.Child screens should be created on standard screens in advance.An overlapping screen is set in the procedure indicated below.(1) Create the child screens on standard screens.(2) Specify [Parent Screen] from [New] command in [Screen].(3) In the parent screen setting dialog box, set a parent screen number and childscreen numbers.103Continuous/Overlapping Screensa.Section 5-3Set the screen number of a parent screen for [Screen No.] in [Parent].If the screen number has already existed, it cannot be registered as a parentscreen.b.Select [Overlapping].c.Specify child screens.Select a screen which is specified as a child screen by selecting it from the[Standard] field, then click on.The selected screen moves to the [Child] field.
If a wrong number is moved,: the screen returns from the [Child] field to the [Standard]click onfield.Two to eight screens can be registered as child screens.For NT31, NT31C, NT631, NT631C, one to eight screen can be registered aschild screen.d.Modify the screen switching order.Child screens are overlapped in the order they are set in the [Child] field.The setting order of the child screens can be modified using.e.5-3-3Click onandafter the completion of child screen setting.Editing a Parent Screen (Modification)The type (continuous/overlapping) and configuration of a created parent screencan be modified.The procedure for modifying a parent screen is indicated below.(1) Specify the parent screen which you want to modify from the application manager, or display the pop-up menu by right clicking the mouse on the parentscreen.(2) Select [Screen] in the menu bar, then choose [Modify Parent], or select[Modify] in the pop-up menu.The parent screen modify dialog box is displayed.The procedure for modifying the setting is the same as setting for new parentscreen information.
Refer to 5-3-1 “Continuous Screens” or 5-3-2 “Overlapping Screens”.Reference: If a parent screen is copied on the application manager, child screens are also copied. (When two Support Tools are started up, the same operation is posible between the Support Tools.)For details of screen copying, refer to 4–2–4 “Copying a Screen”.104Window/Keyboard Screens5-45-4-1Section 5-4Window/Keyboard ScreensWindow/Keyboard ScreensA window/keyboard screen is used as a window screen for the pop-up window/keyboard function. It means a partially display window which contains a keypad orother elements to overlap on the base screen.Note that window/keyboard screen cannot be used with NT11S, NT20S, andNT600S.With NT30, NT30C, NT620S, NT625C and NT31, NT31C, NT631, NT631C without “-V1”, only one window can be opened at a time and objects which can be registered are limited mainly to those used for inputting numeral/string as follows.
(Withthese PT, window is called “keyboard screen”.)Fixed displaysTouch switches (Notify bit, cursor move and print screen functions are not permitted.)Numeral/string setting input filed (Only one input field can be set.)Other elements are not displayed when the window/keyboard screen is opened asa window although they can be registered for the window/keyboard screen.With NT31, NT31C, NT631, NT631C with “-V1”, up to three windows can beopened at the same time and all objects other than thumbwheel can be registered.(However, only one input field of numeral/string input can be registered.)Pop-up display frameThe pop–up display frame specifies the display range and display position of apop–up window/keyboard, the size and position of the frame can be specified asfollows:NT30, NT30C, NT620S, NT620C, NT625C:Specify by 1 dot unitNT31, NT31C, NT631, NT631C:Specify by 20 dotThe pop–up function displays only the area enclosed by the pop–up display frame.105Window/Keyboard ScreensSection 5-4Reference: S Since the same memory area is shared by a pop-up window/keyboard and printscreen function, it is not possible to open the window during the printing process.Moreover, it is also not possible to print from PT during the window is opened.S With PT models other than NT31, NT31C, NT631, NT631C with “-V1” communication with a PC (PLC) is not possible for elements which are displayed in akeyboard/window.
Therefore, the lamp bit of a touch switch in a window cannotbe controlled.S While a window is open, display processing may be slowed a little.Touch Switch functions which can be set on Window/Keyboard screen;NT30, NT30C, NT620S, NT620C, NT625C:S Notify BitS Switch ScreenS Input Key–ControlS Input Key–Window/KeyboardS Input Key–StringS Copy settingS Cursor MoveS Print ScreenWith NT30, NT30C, NT620S, NT620C, and NT625C, keyboard screen can beused as a standard screen. If it is used as a keyboard screen (called from otherscreen), Notify Bit, Cursor Move and Print Screen functions are not available.NT31, NT31C, NT631, NT631C without “-V1”:S Switch ScreenS Input Key–ControlS Input Key–Window/KeyboardS Input Key–StringS Copy settingNT31, NT31C, NT631, NT631C with “-V1”:S Notify BitS Switch ScreenS Input Key–ControlS Input Key–Window/KeyboardS Input Key–StringS Copy settingS Window MoveS Print Screen106Window/Keyboard ScreensSection 5-4Changing the size and the position of pop-up display frameThe procedure for changing the size and the position of a pop-up display frame isshown below.(1) Click the mouse on a dotted line of the pop-up display frame.Green J (handles) appear around the pop-up display frame.(Arrows in the handle indicates the direction to be resized.)(2) The frame size can be changed by dragging a handle.When the mouse cursor is positioned on a handle, the shape of the mousecursor changes as shown below according to the handle position.
When themouse cursor is dragged in this state, the pop-up display frame size changesin the direction the arrow symbol of the mouse cursor indicates.Right-left handleUp-down handleApex handle(3) To move the pop-up frame, drag any position in the dotted lines other thanhandles.When the mouse cursor is positioned on dotted lines other than at handles,the shape of mouse cursor changes as shown below. The pop-up displayframe moves when the mouse cursor is dragged in this state.(4) After the size and the position of the pop-up display frame are determined,click on an arbitrary point in the screen other than the pop-up display frame.The size and the position of the pop-up display frame are set and the handlesare cleared.To change the size and the position of the pop-up display frame, repeat theprocedure shown above from step (1).Reference: The size and position of the pop–up display frame can be specified as follows.5-4-2S NT30, NT30C, NT620S, NT620C, NT625C:Specify by 1 dot unitS NT31, NT31C, NT631, NT631C:Specify by 20 dotImproved input key–window/keyboard functionThis section describes input key–window/keyboard function which was improvedfor NT31, NT31C, NT631 and NT631C with “-V1”.Types of windowsFollowing two types of windows are available.107Window/Keyboard ScreensSection 5-4Global windowThis window can be kept displaying all the time regardless of the screen displayedon PT.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
