H136-E1-01A E5_N Datasheet (986779), страница 6
Текст из файла (страница 6)
2 displayUp KeyLevel KeyDown KeyDigital Temperature ControllersE5EN25DimensionsE5ENTerminal Models11.5248ALM1 ALM2Panel CutoutGroup MountedMounted Separately84.578(48 × number of units −2.5) +1.0045+0.60PVHA ALM392+0.8096OUT1OUT2 STOPCMW MANU11292.3SVGroup mounting does notallow waterproofing.120 min.E5ENTerminal Cover(E53-COV11)WaterproofpackingMounting Bracket92+0.80Crimp terminal size: M3.5Note: To remove the Controller from the case, loosen the screwat the bottom of the front panel with a screwdriver whilepressing down on the hook at the top of the front panel.• Recommended panel thickness is 1 to8 mm.• Group mounting is not possible in thevertical direction.
(Maintain thespecified mounting space betweenControllers.)• To mount the Controller so that it iswaterproof, insert the waterproofpacking onto the Controller.• When two or more Controllers aremounted, make sure that thesurrounding temperature does notexceed the allowable operatingtemperature specified in thespecifications.■ AccessoriesUSB-Serial Conversion Cable (Sold Separately)E58-CIFQ1250USB connector (type A plug)Terminal Covers13E53-COV11(Two Covers provided.)6.5 dia.92.36.510.5826Digital Temperature Controllers E5EN(2,100)LED indicator (SD)LED indicator (RD)1,765Serial connectorCurrent Transformers (Sold Separately)E54-CT121152.85.8 dia.7.525310.540Two, 3.5 dia.1030E54-CT3 AccessoryE54-CT32.36 dia.Connection Example• Armature30ArmaturePlug12 dia.9Approx. 3 dia.Lead40 × 4018• PlugTwo, M3 (depth: 4)Approx.
6 dia.1530(22)Digital Temperature ControllersE5EN27Digital Temperature ControllersE5ANThis Best-selling General-purposeTemperature Controller Is Now Even Better.USB-Serial Conversion Cable and SupportSoftware Are Also Available.• Controllers now available with analog inputs.• Faster sampling at 250 ms.• Transfer output provided for easy output to recorders.• Voltage outputs (to drive SSRs) for both heating and coolingcontrol.• Models available with three-phase heater burnout detection andSSR fault detection.• Manual output provided.• Controller available with long-life relay output.• Easy setting with 11-segment displays.• Connect to either a thermocouple or platinum resistancethermometer with the same model.• Easily see the status from a distance with PV display with threecolor switching function.Note: Refer to page 42 for information on changes in comparison toprevious models.Note: Refer to Precautions on page 45.FeaturesImproved Functions for a Wider Range of ApplicationControl Analog Values, such as Pressures, Flowrates,and LevelsVoltage Outputs (to Drive SSRs) for Both Heating andCooling Control.The E5AN Series now also includes models that accept analoginputs, enabling control applications other than for temperature,including pressure, flowrate, level, humidity, and weight control.Voltage outputs can be used for both heating and cooling for Modelswith Two Control Outputs.Faster Sampling at 250 msThe previous sampling time of 500 ms has been reduced by half to250 ms.
This enables the E5AN to handle application requiring evengreater response speed and accuracy.Easy Connector to a RecorderThree-phase Heater Burnout DetectionWith Models with Three-phase Heater Burnout and SSR FailureDetection, two current transformers can be connected to detect bothheater burnout and SSR failure at the same time, reducing costsbecause a separate heater burnout alarm device is not required.SSR failure detection can be used even with Models with Singlephase Heater Burnout Alarms.A transfer output now makes it easy to connect to a recorder or PLCAnalog I/O Unit.E58-CIFQ1 USB-Serial Conversion Cable for Computer ConnectionA personal computer connection is possible for models without communications.The CX-Thermo Support Software (sold separately) can be used to set parameters, monitor operation, andparameter masks.
(CX-Thermo support of the E5AN is scheduled for March 2005.)Specifications: page 30, Dimensions: page 3628Digital Temperature Controllers E5ANModel Number Structure■ Model Number Legend3. Heater burnout/SSR failureOutput 2H:Heater burnout/SSR failure detection (1 CT)HH: Heater burnout/SSR failure detection (2 CT)Q:Voltage for driving SSRY:Long-life RelayBlank: Not available4. Option Unit5. Input typeT: Thermocouple/platinum resistance thermometer (multi-input)L: Analog inputE5AN-@@@M@-5001 2 3 4 51. Output 1 typeR: RelayQ: Voltage for driving SSRC: Current2. Number of alarms3: 3 alarmsOrdering Information■ Temperature Input (Multi Input) Standard ModelsSizePower supplyvoltage100 to 240 VAC1/4 DIN96 × 96 × 78 (W × H × D)Number of alarm points3Control outputRelayHeater alarmModelNoE5AN-R3MT-500Yes (1 CT)E5AN-R3HMT-500Yes (2 CT)E5AN-R3HHMT-500Voltage (for driving SSR) NoE5AN-Q3MT-500Yes (1 CT)24 VAC/VDC3E5AN-Q3HMT-500Yes (2 CT)E5AN-Q3HHMT-500CurrentNoE5AN-C3MT-500RelayNoE5AN-R3MT-500Yes (1 CT)E5AN-R3HMT-500Voltage (for driving SSR) NoCurrentE5AN-Q3MT-500Yes (1 CT)E5AN-Q3HMT-500NoE5AN-C3MT-500■ Temperature Input (Multi Input) 2 Outputs ModelsSizePower supplyvoltage1/4 DIN100 to 240 VAC96 × 96 × 78 (W × H × D)Number ofalarm points3Control output 1Control output 2ModelRelayVoltage (for driving SSR)Voltage (for driving SSR)Voltage (for driving SSR)E5AN-Q3QMT-500Long-life RelayE5AN-Q3YMT-500CurrentE5AN-R3QMT-500Voltage (for driving SSR)E5AN-C3QMT-500Long-life RelayE5AN-C3YMT-500■ Analog Input ModelsSizePower supplyvoltage100 to 240 VAC1/4 DIN96 × 96 × 78 (W × H × D)Number of alarm points3Control outputRelayheater alarmModelYes (1 CT)E5AN-R3HML-500Voltage (for driving SSR) Yes (1 CT)E5AN-Q3HML-500■ Option UnitsNameFunctionModelCommunication UnitRS-232C CommunicationE53-EN01RS-485 CommunicationE53-EN03Event Input UnitEvent InputE53-AKBDigital Temperature ControllersE5AN29Specifications■ RatingsItemPower supplyvoltage100 to 240 VAC, 50/60 Hz24 VAC, 50/60 Hz or 24 VDCOperating voltage range85% to 110% of rated supply voltagePower consumptionApprox.
11 VASensor inputModels with temperature inputsThermocouple: K, J, T, E, L, U, N, R, S, or BPlatinum resistance thermometer: Pt100 or JPt100Infrared temperature sensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, or 140 to 260°CVoltage input: 0 to 50 mVApprox. 5.5 VA (24 VAC)/approx.
4 W (24 VDC)Models with analog inputsCurrent input: 4 to 20 mA or 0 to 20 mAVoltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 VInput impedanceCurrent input: 150 Ω, Voltage input: 1 MΩ (Use a 1:1 connection when connecting the ES2-HB.)ControloutputRelay outputSPST-NO, 250 VAC, 5 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V,10 mAVoltage outputOutput voltage: 12 VDC +15/−20% (PNP), max. load current: 40 mA, with short-circuit protection circuit (max.load current for control output 2: 21 mA)Current output 4 to 20 mA DC/0 to 20 mA DC, load: 600 Ω max., resolution: approx.
2,700Long-life relayoutputAlarm outputEvent inputSPST-NO, 250 VAC, 3 A (resistive load), electrical life: 1,000,000 operations, load power supply voltage: 75 to250 VAC (DC loads cannot be connected.), minimum applicable load: 5 V, 10 mA, leakage current: 5 mA max.(250 VAC, 60 Hz)SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 1 V, 1 mAContact inputON: 1 kΩ max., OFF: 100 kΩ min.Non-contactinputON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.Outflow current: Approx.
7 mA per pointControl methodON/OFF control or 2-PID control (with auto-tuning)Setting methodDigital setting using front panel keysIndication method11-segment digital display and individual indicators (7-segments displays also possible)Character height: PV: 15 mm, SV: 9.5 mmOther functionsManual output, heating/cooling control, transfer output (on some models), loop break alarm, multi SP, MVlimiter, input digital filter, self-tuning, temperature input shift, run/stop, protection functions, etc.Ambient operatingtemperature−10 to 55°C (with no icing or condensation), for 3-year warranty: −10 to 50°CAmbient operating humidity25% to 85%Storage temperature−25 to 65°C (with no icing or condensation)30Digital Temperature Controllers E5AN■ Input RangesThermocouples/Platinum Resistance Thermometers (Multi-inputs)InputTypePlatinum resistancethermometerNamePt100ThermocoupleJPt100KJTELInfrared temperaturesensorUNRSB10 to70°C60 to120°C115 to165°C140 to260°CTemperature range (°C)Settingnumber17001300170013008508500 to 50 mVUsable inthe followingranges byscaling:−1999 to9999 or−199.9 to999.918001800170016001500140013001200110010009008007006005004003002001000−100.0−200.0Analoginput850600500.0500.0500.0400.0400400.0400400.0260100.0100.0120165000019202122901000.0−200−199.9010.0−199.9230−20.0−100−20.0678−20045The applicable standards for the input typesare as follows:001617−100−200−199.99101112−200−199.9−200131415U: Cu-CuNi, DIN 43710-19851823Shaded settings are the default settings.Pt100: IEC 751K, J, T, E, N, R, S, B: IEC 584-1L: Fe-CuNi, DIN 43710-1985Models with Analog InputsInput TypeCurrentVoltageInput specification4 to 20mA 0 to 20 mA 1 to 5 VSetting rangeUsable in the following ranges by scaling:−1999 to 9999, −199.9 to 999.9, −19.99 to 99.99 or −1.999 to 9.999Setting number0120 to 5 V30 to 10 V4Shaded settings are the default settings.Digital Temperature ControllersE5AN31■ Alarm TypesSelect alarm types out of the 12 alarm types listed in the following table.Set valueAlarm typeAlarm output operationWhen X ispositive0Alarm functionOFF1Upper- and lower(See note 1.) limit23Upper limitLower limit4Upper- and lower(See note 1.) limit range5Upper- and lower(See note 1.) limit with standbysequenceOutput OFFXSPXONOFF(See note 2.)LONOFFONOFFSPONOFFHHXCase 3 (Always ON)Absolute-valueupper-limitONOFF9Absolute-valuelower-limitONOFF10Absolute-valueupper-limit withstandby sequenceONOFFAbsolute-valuelower-limit withstandby sequenceONOFFH SPHSP L HH>0, L<0|H| > |L|SPLH<0, L>0|H| ≥ |L|L SPHSP HSPLCase 1(See note 3.)(See note 4.)Case 3 (Always ON)Case 2H<0, L<0LH SPH<0, L>0|H| < |L|SP LHHH>0, L<0|H| > |L|HSPLL SPSPXONOFFSP H LSPXSPX0X0X0X0ONOFFONOFFONOFFONOFFONOFFONOFFXSPXSPX0X0X0X---Digital Temperature Controllers E5ANH>0, L<0|H| ≤ |L|3.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
