NT21_Reference Manual (V069-E1-1) (986756), страница 91
Текст из файла (страница 91)
Also, system program is suppliedwith the Support Tool as follows:• System programs for NT21-ST121j-E: System Program Version 1.0j(System programs supplied with NT-ZJCAT1-EV4)NT31/NT31C System ProgramsNT31/NT31C have following models.NT31-ST121j-EConventional productpNT31C-ST141j-ENT31-ST121j-EV1Version upgradepgmodel of the pproducts aboveNT31C-ST141j-EV1NT31-ST121j-EV2Version upgradepgmodel of the pproducts aboveNT31C-ST141j-EV2System programs indicated below are installed for the models shown above in the default state. Also, system programs are supplied with the Support Tool as follows:• System programs for NT31-ST121j-E/NT31C-ST141j-E: System Program Version 1.0j(System programs supplied with NT-ZJ3AT1-EV2/ZJCAT1-EV2)• System programs for NT31-ST121j-EV1/NT31C-ST141j-EV1: System Program Version 2.1j(System programs supplied with NT-ZJ3AT1-EV3/ZJCAT1-EV3)• System programs for NT31-ST121j-EV2/NT31C-ST141j-EV2: System Program Version 3.1j(System programs supplied with NT-ZJCAT1-EV4)These system programs have mutual compatibility, therefore, they can be installed and used forNT31-ST121j-E/NT31C-ST141j-E/NT31-ST121j-EV1/NT31C-ST141j-EV1/NT31-ST121j-EV2/NT31C-ST141j-EV2 each.However, there will be a limitation on function depending on the combination with the NT31/NT31C andNT631/NT631C.
Refer to the table on page 455.NT631/NT631C System ProgramsNT631/NT631C have following models.NT631-ST211j-EConventional productpNT631C-ST141j-ENT631C-ST151j-ENT631-ST211j-EV1Version upgradepgmodel of the pproducts aboveNT631C-ST141j-EV1NT631C-ST151j-EV1NT631-ST211j-EV2Version upgradepgmodel of the pproducts aboveNT631C-ST141j-EV2NT631C-ST151j-EV2System programs indicated below are installed for the models shown above in the default state.
Also, system programs are supplied with the Support Tool as follows:• System programs for NT631-ST211j-E/NT631C-ST141j-E/NT631C-ST151j-E:System Program Version 1.0j (System programs supplied with NT-ZJ3AT1-EV2/ZJCAT1-EV2)• System programs for NT631-ST211j-EV1/NT631C-ST141j-EV1/NT631C-ST151j-EV1:System Program Version 2.1j (System programs supplied with NT-ZJ3AT1-EV3/ZJCAT1-EV3)454Appendix BCompatibility with Screen Data of Other PT Models• System programs for NT631-ST211j-EV2/NT631C-ST141j-EV2/NT631C-ST151j-EV2:System Program Version 3.1j (System programs supplied with NT-ZJCAT1-EV4)These system programs have mutual compatibility, therefore, they can be installed and used for theNT631-ST211j-E, NT631C-ST141j-E, NT631C-ST151j-E, NT631-ST211j-EV1, NT631C-ST141j-EV1,NT631C-ST151j-EV1, NT631-ST211j-EV2, NT631C-ST141j-EV2, NT631C-ST151j-EV2.However, there will be a limitation on function depending on the combination with the NT31/NT31C andNT631/NT631C.
Refer to the table on page 455.Limitations of System Program/PT Combinations for the NT31/NT31Cand NT631/NT631CThe following table shows only the relationship between the hardware and system program.For details of the relationship with the screen data created using the Support Tool, refer to NT-series Support Toolfor Windows (Version 4) Operation Manual (V061-E1-j).Combining a -V1 Version and Version without a -Vj SuffixSoftwareHardwareNT31-ST121j-ENT31-ST121j-EV1NT31C-ST141j-ENT31C-ST141j-EV1NT631-ST211j-ENT631-ST211j-EV1NT631C-ST141j-ENT631C-ST141j-EV1NT631C-ST151j-ESystem program Version 1.0jNT631C-ST151j-EV1The following functions can not be usedThe following functions can not be usedS Analogue meterS Analogue meterS High-definition font displayS High-definition font displayS Installation of system programs using Memory UnitS Connection to Mitsubishi PCsS Connection to Mitsubishi PCsS Memory linkS Memory linkS Window control from the hostS Window control from the hostS Multiple display of window screensS Multiple display of window screensS Moving a windowS Moving a windowS Refer to the following table for details on newfunctions supported by the -V2 versions.S Refer to the following table for details on newfunctions supported by the -V2 versions.System program Version 2.1j* Installation of system programs using Memory Unitis possibleThe following functions can not be usedS Installation of system programs using Memory UnitThe new functions supported by the -V2 versionscannot be used.
Refer to the following table for details.S High-definition font display*S Refer to the following table for details on newfunctions supported by the -V2 versions.* The system program’s version can be checked from the System Menu.Combining a -V1 Version and -V2 VersionSoftwareSystem program Version 2.1jHardwareNT31-ST121j-EV1NT31-ST121j-EV2NT31C-ST141j-EV1NT31C-ST141j-EV2NT631-ST211j-EV1NT631-ST211j-EV2NT631C-ST141j-EV1NT631C-ST141j-EV2NT631C-ST151j-EV1NT631C-ST151j-EV2The following functions (new functions supported by the -V2) cannot be used:S Additional data areas accessible in CS/CJ-series PCsS The CS/CJ-series high-speed 1:N NT LinkS Interlock function that controls touch switches, numeral inputs, character string inputs, and recipe objectsS Mathematical functionS Device Monitor functionS Recipe functionS NT30/620 compatible modeS Expanded capabilities for label (guide character) displays, including multiple lines of text, ON/OFF switchingdisplays, numeral memory table displays, and character string memory table entriesSystem program Version 3.1jAll of the functions described in the Setup Manual and Reference Manual can be used.* The system program’s version can be checked from the System Menu.455Appendix BCompatibility with Screen Data of Other PT ModelsCombining a -V2 Version and Version without a -Vj SuffixSoftwareHardwareNT31-ST121j-ENT31-ST121j-EV2NT31C-ST141j-ENT31C-ST141j-EV2NT631-ST211j-ENT631-ST211j-EV2NT631C-ST141j-ENT631C-ST141j-EV2NT631C-ST151j-ESystem program Version 1.0jNT631C-ST151j-EV2The following functions cannot be usedThe following functions cannot be usedS Analogue meterS Analogue meterS High-definition font displayS High-definition font displayS Installation of system programs using Memory UnitS Connection to Mitsubishi PCsS Connection to Mitsubishi PCsS Memory linkS Memory linkS Window control from the hostS Window control from the hostS Multiple display of window screensS Multiple display of window screensS Moving a windowS Moving a windowS Refer to the following table for details on newfunctions supported by the -V2 versions.S Additional data areas accessible in CS/CJ-seriesPCsS The CS/CJ-series high-speed 1:N NT LinkS Interlock function that controls touch switches,numeral inputs, character string inputs, and recipeobjectsS Mathematical functionS Recipe functionS Device Monitor functionS NT30/620 compatible modeS Expanded capabilities for label (guide character)displays, including multiple lines of text, ON/OFFswitching displays, numeral memory table displays,and character string memory table entriesS Additional data areas accessible in CS/CJ-seriesPCsS The CS/CJ-series high-speed 1:N NT LinkS Interlock function that controls touch switches,numeral inputs, character string inputs, and recipeobjectsS Mathematical functionS Recipe functionS Device Monitor functionS NT30/620 compatible modeS Expanded capabilities for label (guide character)displays, including multiple lines of text, ON/OFFswitching displays, numeral memory table displays,and character string memory table entries* Installation of system programs using Memory Unitis possibleSystem program Version 3.1jThe following functions can not be usedS Installation of system programs using Memory UnitAll of the functions described in the Setup Manual andReference Manual can be used.S High-definition font display** The system program’s version can be checked from the System Menu.456Appendix CNT20S and NT30/620 Compatible ModesThis section describes the NT20S (for the NT21) and NT30/620 (for the NT31/NT31C and NT631/NT631C) compatible modes in detail.NT20S Compatible Mode (for the NT21)The NT20S compatible mode is a function that allows screen data and user programs from NT20S to be easilyreused in an NT21.
Using NT20S compatible mode reduces the differences between the earlier and most recentversions and makes it easy to achieve compatibility.The NT20S compatible mode has the following features:• Changes the word configuration of the PT’s PT status control area and PT status notify area to the match theword configuration of the earlier PTs. This change allows the new PTs to execute user programs from the earlierPTs without any editing.• When using the Support Tool to convert screen data for an NT21, the default setting is NT20S compatible mode(the setting can be changed in the Support Tool’s PT environment settings). The default setting converts screendata with the highest level of compatibility.• Even though an NT21 PT is operating in NT20S compatible mode, it still retains all of its new functions.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
