NT support tool (V053-E1-1) (986753), страница 43
Текст из файла (страница 43)
(The arrow indicates the same direction as the arrowmark in the handle.)Drag the mouse cursor in the indicated direction to modify the size of an imagedata.Reference: To shrink the size of an image data, shrink it by one dragging operation withoutreleasing the button of the mouse. If you try to expand the image data which wasshrunk once, the shape or the colour may be modified.334Image EditorSection 8-1Zooming the edit areaIt is possible to display the edit area at an enlarged size to facilitate drawing fineareas and creating small images.To change the display size of the edit area, select [View] in the menu bar thenchoose [Zoom]; specify the zoom percentage.Modifying GraphicsCreated graphics can be mirrored (flipped) up and down or right and left, or turned90° left or right.The mirroring and 90° turn operations are possible for the graphic in the rangespecifying frame.To modify the graphic, select [Edit] (menu bar) → [Rotate or Flip], then specify thedesired modification method.Flip HorizontalFlip VerticalRotate LeftRotate Right335Image EditorSection 8-1Cutting/copying/deleting graphicsYou can cut, copy, paste, and delete the created graphic.Cut, copy and delete operations are valid for the graphic in the range specifyingframe.To call the desired operation, select [Edit] in the menu bar, then specify [Cut],[Copy], [Paste], or [Delete].
(or right click the mouse, then specify [Cut], [Copy], or[Paste])Cuts the graphic in the range specifyingframe and stores it in the clip board.Copies the graphic in the range specifyingframe onto the clip board.Pastes the graphic in the clip board to thespecified position.Deletes the graphic in the range specifyingframe.Reference: Image data which is cut or copied on one image editor window can be pasted ontothe other image editor window (The data can be pasted until another data is storedto the clipboard).When more than one image editor window is displayed or when two Support Toolsare opened by [Import Component] from [File] menu (same PT model setting), cut,copy and paste operations between these image editor windows are possible. Fordetails, refer to 3–3–6.Saving to the bit map fileYou can save the created graphic to the file in bit map format.This operation is valid for the graphics in the range specifying frame.To save the graphic to the bit map file, follow the procedure below.(1) Specify the area to be saved in a file with a range specifying frame.(2) Select [Copy To] from [Edit] menu.The dialog box to specify the file name is displayed.(3) Set the folder and file name and click on.Graphics in the range specifying frame is saved in a file.336Image EditorSection 8-1Pasting from the bit map fileYou can read out the graphics saved in a bit map file and paste them onto theimage editor.The graphics can be pasted onto the image editor which is currently activated.To paste the graphic from the bit map file, follow the procedure below.(1) Select [Paste From] from [Edit] menu.The dialog box to specify the file to be read is displayed.(2) Specify the folder and file name and click on.Read out graphic is pasted onto the image editor enclosed with a range specifying frame.(3) Select [Clip] from [Edit] menu.Image data size is changed to the read out image size.Instead of the procedure (3), it is also possible to drag the read out image to therequired position.Changing the image data sizeThe image data size can be changed in either of the following two ways.S Changing the size by property settingS Changing the size to the range specifying frame sizeS Changing the size by property settingChange the setting for [Size] in the image editor property settings to change thesize of the image data.The image data size is changed according to the new setting; the reference pointof the size change is at the upper left corner of the present size.If the size is reduced, part of the created graphic may be cut.337Image EditorSection 8-1S Changing the size to the range specifying frame sizeThe size of the image data can be changed to fit the size of the specified rangespecifying frame.Select [Edit] in the menu bar, then select [Clip].Quitting the image editorYou can quit the image editor in any of the three ways described below.S Clicking onat the upper right corner of the image editor.S Selecting [Close] from the control menu box of the image editor.S Double clicking the control menu box of the image editor.Control menu box338Library Editor8-2Section 8-2Library EditorGraphics of any required shape can be created by combining fixed elements.
Thecreated graphic can be registered as one element (library data) and any number ofelements can be displayed at any positions in any screen using the library displayfunction.Created library data can be used for image/library lamp display, alarm list display,alarm history display.Reference: Library editor has the following features.S You can draw any graphics by combining fixed elements.S It is possible to import library data from the different screen data file.S Fixed display elements can be copied, cut, pasted from the editing screenS Copy, cut, paste operation of library data is possible.S Preview display of selected library data is available on the library table.8-2-1Operating the library tableLibrary table dialog is configured as follows.[Edit] .
. . . . . . . Deletes, cuts, copies or pastes the library data of the selectedcode (P340Y342). It is possible to select two or more codesand delete them collectively.[Goto Code] . Code number can be specified and the cursor moves to thecode. The operation method is same as the “Goto Entry” ofmemory table (refer to 7–1–6).[Preview] .
. . . Switches the preview window ON and OFF (P340).[Open] . . . . . . Displays the editing screen (library editor) of the selected code(P343). When two or more codes are selected, edit screens ofall the selected codes can be opened collectively.[New] . . . . .
. . Registers the new library code to the library table (P342).Only the registered library codes are listed on the library table.Press this button when you are going to create new library data.[Delete] . . . . . Deletes the library data of the selected code.
When two or morecodes are selected, they can be deleted collectively.[Close] . . . . . . Closes the library table dialog.[Help] . . . . . . . Displays “Help” about the library table dialog box.339Library EditorSection 8-2S Specifying a codeTo specify a code for operations, click on the objective line (library code).To specify the continuous codes collectively, click on the first code to be selectedand then the last code to be selected while pressing the Shift key.If you click on a code while pressing the Ctrl key, the code will be selected or deselected alternately each time it is clicked.S Preview FunctionSupport Tool provides a preview function which can display the contents of the selected code.When two or more codes are selected, the preview of the code selected last will bedisplayed in preview window.The preview window can be switched ON and OFF by pressing the/button.S Deleting the library dataTo delete a library data, follow the procedure below.
Deleted library data will not bestored to the clipboard and its code itself will be also deleted. When two or morecodes are selected, they will be deleted collectively.(1) Select [Library Editor] from [Tools] menu.The library table is displayed.(2) Select the code of the library data to be deleted.When two or more codes are selected, they can be deleted collectively.(3) Perform one of the following operations.Sbutton → [Delete]S Right click on the selected code → [Delete]SbuttonSelected code will be deleted after you click onfirmation dialog box.button in the con-S Cutting/copying the library dataTo cut or copy a library data, follow the procedure below. The cut/copied librarydata will be stored to the clipboard and can be pasted to the other codes.In case of “cut”, cut code will be deleted from the library table.
In case of “copy”,copied code remains in the library table.340Library EditorSection 8-2Reference: When two Support Tools are started up by [Import Component] from [File] menu,the data which is cut or copied on the library table of one Support Tool can bepasted onto the library table of another Support Tool (PT model setting of the twoscreen data files should be the same).
For details, refer to 3–3–6.(1) Select [Library Editor] from [Tools] menu.The library table is displayed.(2) Select the code of the library data to be cut or copied.Select only one code. When two or more codes are selected, cut/copy operation can not be performed.(3) Click on thebutton or right click on the selected code.(4) Select [Cut] or [Copy].Library data of the selected code will be stored to the clipboard. In case ofbut[cut], confirmation dialog box will be displayed. After clicking onton, cut code will be deleted from the library table.S Pasting the library dataTo paste a library data which is stored in the clipboard by cut or copy operation,follow the procedure below.Reference: S When two Support Tools are started up by [Import Component] from [File] menu,the data which is cut or copied on the library table of one Support Tool can bepasted onto the library table of another Support Tool (PT model setting of the twoscreen data files should be the same).
For details, refer to 3–3–6.S If the paste operation is performed, the library data previously registered to thecode is overwritten and lost. (Confirmation dialog box will be displayed.)S When a library data is pasted, the property (size, colours, compression, comment) of the library code is changed to that of the new one.(1) Select [Library Editor] from [Tools] menu.The library table is displayed.(2) Select the code of the library data to be pasted.Select only one code. When two or more codes are selected, paste operationcan not be performed.(3) Click on thebutton or right click on the selected code.341Library EditorSection 8-2(4) Select [Paste].[Paste] can not be selected if the library data to be pasted is not stored in theclipboard.