ZEN Programmable Relay_Operation Manual (W385-e1-3) (986765), страница 4
Текст из файла (страница 4)
Seasonal control is possible using calendar timers and day/time control is possible with weekly timers.Weekly timers: Refer to page 60.Calendar timers: Refer to page 62.MO −SAFR− SUFor gardens, parks, andrecreational ponds.Direct Analog InputsCPU Units with DC power supply inputs have 2 analog input points (0to 10 V) and 4 analog comparators.Refer to page 63.Temperature control for hothouses and tanks. Preventfreezing of swimming pools.Easier MaintenanceUse the display function in LCD-type CPU Units to display user-setmessages, the date, time, or other data. Button switches can also beused as input contacts. Applications include usage as a simple display operation panel.Refer to page 69.6OutlineSection 1-1Longer Backlight for Dark SituationsThe automatic cutout time for the backlight for LCD-type CPU Unitscan be set to 2, 10, or 30 minutes, or set to operate continuously.With the display function, the backlight can also be set to turn ONwhen a message is displayed.Refer to page 80.Prevent Chattering and Noise-related MalfunctionsSet the input filters to extend the filter timer and prevent malfunctions.Refer to page 78.Filter timerONExporting Systems OverseasDisplay for LCD-type CPU Units is available in 6 languages.
A Summertime function also supported.Changing display language: Refer to page 38.Summertime settings: Refer to page 81.ENGLISHJAPANESEGERMANFRENCHITALIANSPANISHProgramming SecurityPrograms can be protected by setting a password.Refer to page 76.PASSWORD0000RUN39547Features and Part Names1-21-2-1Section 1-2Features and Part NamesFeatures and System ConfigurationThe ZEN is small but has a wide range of functions and is easy touse.
The ZEN facilitates small-scale automatic control.LCD-type CPU Unit Features• Simple button-operated programming.• Highly visible, backlit LCD.• Adjustable automatic cutout time for the backlight.• Adjustable contrast for the LCD screen.• Six-language display.• Display function for user-set messages (4 lines x 12 characters),time, or timer, counter, or analog-converted value displays.• Button switches allowing operation buttons to be used as inputcontacts.• Built-in weekly and calendar timers to allow simple seasonal ortime-based operation.LCD-type and LED-type CPU Unit Features• Both 100 to 240-VAC and 24-VDC power supply models available.• Built-in analog comparator for temperature control and otheranalog applications (provided on CPU Units with DC power supply inputs, two analog inputs IN4 and IN5, 0 to 10 V).• Input filter settings to prevent noise-related malfunctions for bothCPU Units and Expansion I/O Units.• Program and settings data backed up on built-in EEPROM.• Programming using ladder diagrams.• Password function to protect programs.8Features and Part NamesWork bits, holdingtimer data, counterdata, and date/time data will bebacked up duringlong-term powersupplyLCD/LED-typeinterruptions if a CPU UnitBattery Unit(optional) ismounted.Section 1-2Up to 24 I/O points possible if Expansion I/O Units are connected.Expansion I/O Units (up to 3 can be connected)ZEN-BAT01Battery UnitZEN-ME01MemoryCassettePrograms can besaved and copiedby using aMemory Cassette(optional).Personal computerconnecting cableOutput relays have large a switchingcapacity (8A at 250 VAC).
All 4 outputshave independent contacts.ZEN-SOFT01-V2ZEN Support SoftwarePrograms can be created, edited, saved, and printedusing the ZEN Support Software (optional).9Features and Part Names1-2-2Section 1-2Part NamesLCD-type CPU Units (with LCD and Operation Buttons)Power supplyInputs100 to 240100 toNotVAC, 50/60 Hz 240 VAC iso24 VDC24 VDC latedOutputsInputfilter6 Relays 4 YesAnaloginputsCalendar/timeNoYesYesTransistorsModel numberZEN-10C1AR-AZEN-10C1DR-DZEN-10C1DT-D(See note.)Note The CPU Unit with transistor output is scheduled to be releasedsoon.Left SideFrontPower supplyInput terminalsterminalsLCDOperationbuttonsOutput terminalsBattery Unit connector(Remove the seal toconnect the Battery Unit.)10Right SideZEN Support Software connector(also used for Memory Cassette.)Expansion Unitconnector cover.Remove this cover toconnect Expansion Unit.Features and Part NamesSection 1-2LED-type CPU Units (without LCD/Operation Buttons)The ZEN is also available in an LED type that provides full operatingfunctionality, but no direct programming input.
The ZEN Support Software or a Memory Cassette containing a program is required.Power supplyInputsOutputsInputfilters100 to 240100 toNot 6 Relays 4 YesVAC, 50/60 Hz 240 VAC iso24 VDC24 VDC latedAnaloginputsCalendar/timeModel numberNoNoZEN-10C2AR-AYesZEN-10C2DR-DTransistorsZEN-10C2DT-D(See note.)Note The CPU Unit with transistor output is scheduled to be releasedsoon.Left SideFrontRight SidePower supplyInput terminalsterminalsOutput terminalsPersonal computerconnector (also used forMemory Cassette.)Battery Unit connector(Remove the seal toconnect the BatteryUnit.)LED indicatorsExpansion I/O Unitconnector coverRemove this cover toconnect Expansion I/O Unit.IndicatorsNameColorPOWERGreenRUNGreenERRORRedMeaningLitPower suppliedNot litNo powerLitOperating (RUN)Not litStopped (STOP)LitErrorNot litNormal11Features and Part NamesSection 1-2Differences between LCD- and LED-type CPU UnitsItemLCD typeAC powersupplyLED typeDC powersupplyAC powersupplyDC powersupplyProgram editing, parametersettings, operation monitoringYes (Also possible with ZENSupport Software.)Yes (ZEN Support Softwarerequired.)Operating mode switchingYes (Also possible with ZENSupport Software)Yes (ZEN Support Softwarerequired.)Calendar and clock functionYesNoBitsInput, output,Yeswork, holding bitsYesTimer, holdingtimer, counterYesYesWeekly timer,calendar timerYesNoAnalog compara- NotorSettingsNoYesYes (ZEN Support Softwarerequired.)Button switchesYesYesDisplay functionYesNoDisplay language Yes (Also possible with ZENSupport Software.)-Backlight cutouttimeYes (Also possible with ZENSupport Software.)-Input filtersYes (Also possible with ZENSupport Software.)Yes (ZEN Support Softwarerequired.)PasswordYes (Also possible with ZENSupport Software.)Yes (ZEN Support Softwarerequired.)YesYesZEN to MemoryYesCassette transferMemory Cassette to ZENtransferYesMemory CasYessette initializationBattery Unit connectionNoYes (Automatic transfer whenpower is turned ON.)NoYesYesZEN Support Software connec- YestionYes12YesTimer/countercomparatorExpansion I/O Unit connectionMemoryCassettefunctionsYesFeatures and Part NamesSection 1-2Expansion I/O UnitsNo.
of I/OPoints8 I/O4 inputs4 outputsInputsOutputsModel100 to 240 VAC, 50/60 Hz Isolated4Relays4ZEN-8EAR24 VDC4Relays4ZEN-8EDRTransistors4ZEN-8EDT(See note.)Isolated100 to 240 VAC, 50/60 Hz Isolated4------ZEN-4EA24 VDCIsolated4------ZEN-4ED---------Relays4ZEN-4ERNote The Expansion I/O Unit with transistor output is scheduled to bereleased soon.Left SideFrontRight SideInput terminalsExpansion Unit connectorOutput terminalsExpansion Unit connector cover.Remove this cover toconnect Expansion I/O Unit.13Display Screen and Basic Operations1-3Section 1-3Display Screen and Basic OperationsThe display screen for the LCD-type CPU Units and the operations ofthe buttons are shown below.LCDDEL ButtonALT ButtonCursor KeysESC Button OK ButtonIcon MeaningsRUNERR▲ ▼IconRUNMeaningDisplayed while in RUN mode.ERRIndicates an error.▲Displayed when there is a higher-level menu or ladderprogram line than the one currently displayed.▼Displayed when there is a lower-level menu or ladder program line than the one currently displayed.Displayed when a password has been set.Operation Button Names and OperationsButtonFunctionMenusWriting ladder programSetting parametersButton switch(See72.)DEL---Deletes inputs, outputs, con- --nection lines, and blank lines.B6 ONALT---Switches between normallyopen and normally closedconditions.---B7 ONChanges to connection linewrite mode.Inserts a line.14Display Screen and Basic OperationsButtonSection 1-3FunctionMenusWriting ladder programSetting parametersButton switch(See72.)B5 ONMoves the cursor up anddown.Moves the cursor up anddown.Moves the cursor upand down.Selects bit types and functions.Changes numeralsand parameters.---Moves the cursor right andleft.Moves the cursorright and left.B3 ONESCReturns to thepreviousscreen.Cancels the setting andreturns to the previous operation.Cancels the settingand returns to theprevious operation.B0 ONOKSelects themenu item atthe cursorposition.Confirms the setting.Confirms the setting.
B1 ONUpDownLeftRightB2 ONB4 ON15Display Screen and Basic Operations1-3-1Section 1-3ScreensSTOP ModeWhen power is turned ONRUN ModeWhen power is turned ONWhen Expansion I/O Unitis connected.When Expansion I/O Unitis connected.Display Function ScreenDisplay Function Screen(Userspecifiedmessage)Note: The display will beblank if the display function isnot being used.(Userspecifiedmessage)Note: The display will beblank if the display function isnot being used.STOP ModePROGRAMRUNPARAMETERSET CLOCKRUN ModeMONITORSTOPPARAMETERSET CLOCKRUNPARAMETERSET CLOCKLANGUAGEOTHERPARAMETERSET CLOCKLANGUAGEOTHERRUNDisplay ScreensMain ScreenDayOperating modeTime (min:s)CPU input bit (I) status(❍: OFF/●: ON)I0 I1 I2 I3 I4 I5CPU output bit (Q) status(@: OFF/■: ON)@ @ @ @Q0 Q1 Q2 Q316Day displaySU: SundayMO: MondayTU: TuesdayWE: WednesdayTH: ThursdayFR: FridaySA: SaturdayDisplay Screen and Basic OperationsSection 1-3When One or More Expansion I/O Units Are ConnectedExpansion I/O Unit input bit (X) status(❍: OFF/●: ON)X0 X1 X2 X3 X4 X5 X6 X7 X8 X9Xa XbNote: The display dependson the number of inputpoints on the connectedExpansion I/O Units.Expansion I/O Unit output bit (Y) status(@: OFF/■: ON)@ @Ya Yb@ @ @ @ @ @ @ @ @ @Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9Note: The display dependson the number of outputpoints on the connectedExpansion I/O Units.17Display Screen and Basic OperationsSection 1-3Menu Screen ConfigurationRUN ModeLadder Monitor ScreenMONITORSTOPPARAMETERSET CLOCKRUNThe ON/OFF status of input bits can be checked bymonitoring the ladder program.▼Switches to STOP mode.The operation status of the timers, counters, and analogcomparators can be monitored and the settings changedduring operation.
Refer to page 23.STOP ModePROGRAMRUNPARAMETERSET CLOCKLadder Program Edit Screen(Refer to page 21.)EDIT PROGDELETE PROGCASSETTECreates and editsladder program.▼Deletes ladder program andparameters.Memory Cassette Operation(Refer to page 85.)SAVELOADERASETransfers programsbetween ZEN andthe Memory Cassetteand initializes theMemory Cassette.Note: Displayed only when a MemoryCassette is mounted.Switches to RUN mode.Changes the settings for timers, counters, and analog comparators.(Refer to page 26.)Date and Time Settings (Refer to page 39.)SET CLOCKSET CLOCKPROGRAMSets the date andSUMMER TIMEyy/mm/ddRUNtime.00/01/01PARAMETER00:03(SA)SET CLOCK▼Set when shipping to countries thatuse summer time.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
