NT21_Reference Manual (V069-E1-1) (986756), страница 46
Текст из файла (страница 46)
You can use recipe elements to display and edit specificrecipe data, write data to the host, or read data from the host.• Set the initial values for parameters within data in table format using the Support Tool. After you set the initial value, you can change the parameters usingeither of the following two methods.1, 2, 3...1. Edit each parameter individually using the pop-up window for entering values on the PT.2.
Read and write parameters from/to the host (i.e., PC or PT memory) onerecord at a time using the Read and Write touch switches for recipes on thePT.ParametersRecordsWriteReadTouch SwitchTouch SwitchExamplePage & Line ScrollRecords for Objects A, B, and C, which set temperature, pressure, and processing time as parameters.(°C)Select record number 2and press the Writeswitch to write the 3parameters for ObjectB to the PC.PCTemperature settingPressure settingProcessing time216Section 2-14RecipesThe following additional functions are also provided.• You can specify whether to permit editing of parameters on the PT using theSupport Tool (in one record unit).• You can set the interlock function (i.e., prohibiting operation) for all touchswitches.• After writing to the host, you can send a writing completed notification to thehost using the status notify bits (strobe operation) on the host.OutlineOverall ConfigurationCreate (1) recipe table and (2) recipe elements.Support ToolPTTransfer screen data containing registered recipe table and recipe elements.Screen(1) Recipe table(2) Recipe elementsDisplay on the screenRecipe table title Parameter 1ValueRecord 1 titleV ueRecord 2 titleV ueRecord 3 titleRecipe dataParameter 2ValueValueValueParameter 3ValueValueValueEditReading/writing in the unit of recordPCLeftmost wordLeftmost word+1Leftmost word+2MemoryParameter 1Parameter 2Parameter 3Note: Example for data size = 1 word• Use the Support Tool to create the following two types of data: (1) Table data(recipe table) and (2) Display and setting elements (recipe elements) that usethe recipe table.1, 2, 3...1.
Recipe table: Multiple discrete data in table format (the data is called “recipedata”).2. Recipe elements: These elements display recipe data on screen, and readand write data from/to the host. Register and use recipe elements on ascreen. Specify the recipe data to be used by its number, and arrange andcreate special recipe touch switches as appropriate.Reference: Multiple recipe elements can also share (i.e., reference anduse) the same recipe data.• Transfer screen data to which recipe elements and recipe table are registeredfrom the Support Tool to the PT by application downloading.• Recipe elements that have been registered on screen read corresponding recipe data from the PT.• You can change recipe data parameters by performing the edit operation usingthe touch switches on the PT.• You can read and write recipe data parameters in units of host words or recordsusing the Read and Write touch switches on the PT.217Section 2-14RecipesList of FunctionsItemRecipe tableRecipep data( bl d(tabledata))detailsFunctionConsist of multiple individual recipe data.1,000 records (entries) max.RecordConsists of 200 parameters max.ParameterNumerical dataA touch switch for moving the cursor appearsin the parameter field.Recipe data200 max., to a memory capacity of 40 Kbytes max.that can beregistered inone applicationRecipe elementsRecipe datanumber to beused(referenced)Recipeelements thatcan beregistered inone screenTransferringrecipe tables andrecipe elementsConsist of recipe data display field and special recipe touchswitches.Specify the recipe data used as a recipe element from therecipe table using its number (a number from 1 to 200 isautomatically assigned to each recipe data item).Normal (standard) screen: 1 max.Overlapping screen: 8 max.Window screen: Not possible.When the PT is in transmit mode, you can transfer thefollowing units from the Support Tool to the PT.• All screen data (applications): All recipe tables and recipe elements• Screen data with recipe data affixed: Recipe elements only• Recipe table: Recipe tables onlySettingparameters• Set the initial recipe data parameters using the Support Tool.• Press the parameter field in the recipe elements.
The parameter field will become an input field, and the specified pop-up window will be displayed. You can enter the values in the parameters field using the input and confirmation touch switches set inthe window beforehand.Note You can restore the edited parameters to their initial values set using the Support Tool by using the System Menu(Maintenance Mode/Memory Init.) on the PT.Exchangingrecord data withhost words (PCmemory or PTmemory)• Select a record, and then press the Write touch switch to writeall the parameters for one record to specified consecutivewords on the host.• Select a record, and then press the Read touch switch to readall the parameters for one record from specified consecutivewords on the host.Note You can select any of the following communications methods (serial communications mode) between the PT andPC: 1:1 NT Link, 1:N NT Link, or host link.Additionalfunctions• You can enable or disable edit operations for each record individually on the PT using the Support Tool.• You can prohibit all recipe touch switch operations while a specified host bit is OFF.
(Interlock function.)• When writing to a word in the host is completed, you can sendan operation completed notification using a strobe operation(OFF→ON→OFF) of a specified bit in the host.218Section 2-14RecipesDisplay Configuration of Recipe ElementsRecipe elements are displayed with records as rows and parameters as columns.below. UnshadedSet the parameters (numerical data) in the parts shadedparts are fixed character strings.You can set the parameters (numerical data) using initial settings on the SupportTool or an edit operation on the PT.You can read and write set parameters (numerical data) in record units from/tothe host (PC memory or PT memory) using touch switch on the PT.NameSerial No.Row: recordColumn: parameterRecipe table titleRecord 1 titleRecord 2 titleRecord 3 titleTouch switch forwriting to the hostParameter 1ValueValueValueTouch switch forreading from the hostTitleParameter 2ValueValueValueParameter 3ValueValueValueParameter: shaded parts (Numerical data input/display columns with parameter editingtouch switches)Scroll touch switchRead/write touch switches219Section 2-14RecipesElements Configuration TableTable formatDisplays records as rows, and parameters ascolumns.Recipep data(1 datadinitableformat)Recipe data nameRecipe data commentYou can attach a table name to the top left.You can attach a comment about the table (notdisplayed on PT screen).Storage type of allocated words in host(can be specified for each recipe data)Select from BCD, binary, or system setting.Name fieldRecord nameYou can display a comment for each record atthe start of the row.
Has a record selectingtouch switch.Parameter nameYou can display a comment for each parameterat the start of the column.Initial valuesThe initial values are set in the screen data sentto the PT. Thereafter, you can change the databy performing an operation from the PT, orexchanging data with the host.ParameterfieldThe column contains touch switches for editingparameters.Specialrecipetouchswitchesi hScroll touchswitchesRead andWrite touchit hswitchesPage scroll touchswitches forrecordsTake the number of records displayed to be 1page, and then scroll 1 page up or down at atime.Page scroll touchswitches forparametersTake number of parameters displayed to be 1page, and then scroll 1 page sideways at atime.Line scroll touchswitches forrecordsScroll 1 record up or down.Line scroll touchswitches forparametersScroll 1 parameter sideways.Write touch switchRead touch switchRecord selecting touch switchesWriteWrites record data selected using the recordselecting touch switches to the host.ReadReads the record data selected using the recordselecting touch switches from the host.Record n nameTouch switch for the record name field.Use to select the target record when readingand writing from/to the host by touch switchoperation.Parameter editing touch switchValueTouch switch in the parameter field.Press this touch switch to enable input in theparameter field.
You can also open a windowspecified for inputting values at the same time.Reference: You can also select not to display parameters in units of recipe data, using recipeelement settings in the Support Tool.You can also select not to display serial numbers to the left of record names, using Support Tool settings.220Section 2-14Recipes2-14-2 Operation OutlineThe basic recipe element operations are given below.Initial Settings Using the Support Tool1, 2, 3...1.
Recipe Table (Total Recipe Data) SettingsWhen creating recipe tables using the Support Tool, set the parameter values, recipe data name, recipe data comments, record names, and parameter names.a) Names and comments can be set only from the Support Tool. You cannotchange them from the PT.b) You can also set the following details in the recipe table using the Support Tool.Enable or disable parameter editing on the PT (“Lock”; set for each recordindividually), and specify the start address for consecutive words allocatedin the host.Recipe dataCreate recipe tablesRecipe table titleParameter 1Parameter 2Parameter 3Record 1Recipe table titleParameter 1Parameter 2Record 1Record 2Recipe table titleParameter 1Parameter 2Parameter 3Record 1Record 2Record 32.
Pasting Recipe Elements on ScreensCreate recipe elements on screen using the Support Tool. In the recipe element, specify the recipe data number to be displayed or set.Note You can also set the following details in the recipe elements using theSupport Tool.Show/hide parameters, and enable or prohibit all recipe touch switches(i.e., interlock function).Refer to the NT-series Support Tool Version 4 for Windows Operation Manual for details.Recipe tablesRecipe table title Parameter 1Record 1Recipe table title Parameter 1Parameter 2Parameter 3Parameter 4Parameter 2Record 1Record 2Recipe table title Parameter 1Record 1Parameter 2Parameter 3Record 2ScreenRecord 3Specify therecipe datanumberRecipe elementRecipe table titleRecord 1Record 2Parameter 1Parameter 2Parameter 3Register the recipe element on the screenRecord 3221Section 2-14RecipesSend recipe tables (i.e., entire sets of recipe data) and recipe elements createdas shown above from the Support Tool to the PT in application units (i.e., send allscreen data in a single operation).You can also send recipe elements to the PT in units of screens, and send recipetables to the PT in recipe table units.Sending Recipe Tablesand Recipe ElementsUsing the Support ToolCreate recipe tables andregister recipe elementsin each screen.Support Tool[Recipe Table Setting Screen]Recipe table titleParameter 1Parameter 2Parameter 3Record 1When the PT is set tothe transmit mode,transfer recipe tableand recipe elementdata using batchtransfer of screendata from the SupportTool.Record 2Record 3Editing Parameters (Numerical Data) from the PT1, 2, 3...1.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
