Главная » Просмотр файлов » NT21_Reference Manual (V069-E1-1)

NT21_Reference Manual (V069-E1-1) (986756), страница 4

Файл №986756 NT21_Reference Manual (V069-E1-1) (Техническая документация) 4 страницаNT21_Reference Manual (V069-E1-1) (986756) страница 42015-07-23СтудИзба
Просмтор этого файла доступен только зарегистрированным пользователям. Но у нас супер быстрая регистрация: достаточно только электронной почты!

Текст из файла (страница 4)

Specialized system programs can be installed that allow theNT31/NT31C or NT631/NT631C to be controlled from other companies’ Sequencers. (The NT21 does not support PCs made by other companies.)Multiple WindowsUp to 3 windows can be displayed simultaneously in the normal display. A9-word window control area has been allocated in the host; the contents of these9 words can be changed from the Host to open, close, and move windows.5SectionFunctions of the NT21, NT31/NT31C and NT631/NT631C1-21-2-2 Comparison between NT21, NT31, NT31C, NT631, and NT631CNT21The NT21 models are shown in the following table.ItemNT31/NT31CModelsNT21-ST121-E (Beige)NT21-ST121B-E (Black)DisplaySTN monochrome LCD (with white backlight)Two models are available: the monochrome NT31 and the 8-color NT31C.

Thedifferences between the NT31 and NT31C are shown in the following table.ItemNT631/NT631CItemNT21NT31NT31CFront panelcolorNT31-ST121-EV2 (Beige)NT31-ST121B-EV2 (Black)NT31C-ST141-EV2 (Beige)NT31C-ST141B-EV2 (Black)DisplaySTN monochrome LCD (withwhite backlight)STN color LCD (with whitebacklight)Two models are available: the NT631 has a monochrome (yellow EL) displayand the NT631C has an 8-color display. The differences between the NT631 andNT631C are shown in the following table.NT631C-ST141j-EV2NT631C-ST151j-EV2Front panel NT631-ST211-EV2 (Beige)colorNT631-ST211B-EV2 (Black)NT631C-ST141-EV2 (Beige)NT631C-ST141B-EV2 (Black)NT631C-ST151-EV2 (Beige)NT631C-ST151B-EV2 (Black)DisplaySTN color LCD (with white backlight) Bright TFT color LCD (with whitebacklight)6NT631-ST211j-EV2Monochrome EL displayFunctions of the NT21, NT31/NT31C and NT631/NT631CSection1-21-2-3 Additional Functions of the V2 Versions of the NT31/NT31C andNT631/NT631CThe V2 versions of NT31/NT31C and NT631/NT631C are supplemented andenhanced by the following functions.High-speed 1:N NT LinkThe V2 versions are compatible with the high-speed 1:N NT Link as well as theearlier standard 1:N NT Link.Additional MathematicalFunctionsOperands (values referenced by equations) can be registered to allow the PT toperform calculations automatically and write the results of those calculations tonumeral memory table entries or words in the host.Device Monitor FunctionThe new device monitor function can be used to change the PC’s operatingmode or display/change values in the PC’s memory areas.

The PVs of severalwords can be listed with the device monitor.Interlock FunctionPT operations and inputs can be disabled from the PC if interlock bits have beenallocated in the PC for the corresponding PT touch switches, numeric inputs, orstring inputs.Improved Lamp/TouchSwitch Guide CharactersThe following displays can be performed with lamp or touch switch guide characters:• Display several lines of guide characters.• Switch the display between different guide characters when OFF and ON.• Display numeral memory table contents as guide characters.• Display string memory table contents as guide characters.NT30/NT30C, andNT620S/NT620C/NT625CCompatibleThe word configuration of the PT status control area and PT status notify areacan be set to emulate those of the NC20S, NT30/NT30C, or NT620S/NT620C/NT625C; this mode is called NT20S or NT30/620 compatible mode.When the PT is operating in a compatible mode, it will be equivalent to anNT20S, NT30/NT30C, or NT620S/NT620C/NT625C in the functions listed below.

The PT retains full V2 functionality in all functions other than the ones listedbelow. Refer to Appendix C NT20S and NT30/620 Compatible Modes for moredetails.• Word configuration and functions of the PT status control area and PT statusnotify area• Image/library codes• Insertion of image/library data into character stringsAdditional CS/CJ-seriesPC Data AreasAccessibleData areas in CS/CJ-series PCs that were previously inaccessible can be accessed. The data areas listed below can be accessed (read/written) through a1:N NT Link with the CS/CJ-series PC. (These areas cannot be accessedthrough a Host Link connection.)All banks in the EM Area, Timer Completion Flags (TU), Counter Completion Flags (CU), Work Area (WR), Task Flags (TK), and the HR Area.Recipe FunctionYou can set the data (numeric values) for multiple words in record units using thetabular elements on the PT screen, and write these settings in a single operationto words on the host (i.e., PC or PT memory) using a touch switch operation onthe PT Unit.

Also, multiple words of numeric data can be read from the host inone operation. In this way, groups of parameter settings can be edited at the PTUnit, and written to or read from the host.Adjusting Contrast andBrightness During PTOperationYou can display the brightness and contrast adjustment screen using either thetouch switch or commands from the host, even while the PT is in operation.7SectionFunctions of the NT21, NT31/NT31C and NT631/NT631C1-21-2-4 Comparisons with Earlier ModelsComparison between NT20S and NT21ItemNT20SNT21NT Support Tool usedNT-ZJCAT1-EV4 or NT-ZA3AT-EV2NT-ZJCAT1-EV4Effective display area112 x 56 mm (horizontal x vertical)117 x 63 mm (horizontal x vertical)Screen dots (resolution)256 x 128 dots (horizontal x vertical)260 x 140 dots (horizontal x vertical)Number of touch switches12 x 6 (horizontal x vertical)13 x 7 (horizontal x vertical)DIP switch settingsOn rear of UnitNone (software settings)Use of Memory UnitNot possiblePossible (transferring system programdata and screen data)RS-232C interfaceConnector (9-pin) also used as port forscreen data transfer.- Serial port A connector (also usedfor screen data transfer, 9-pin)- Serial port B connector (for hostcommunications only, 9-pin)Backlight life expectancy10,000 hours min.50,000 hours min.Replacement BacklightNT20S-CFL01Replacement not possibleBattery backupNonePossible*1 (numeral table, string table,history data, recipe data)System program dataInstalled in PT (not replaceable)The system installer and system program data are supplied with the NTSupport Tool.1:N NT LinksStandard onlyStandard or high-speedMemory LinkNotpossible*2Number of user-registered screensMaximum of 500Maximum of 3,99996 KB512 KBNumeral/character string tableMaximum of 128 entries eachMaximum of 2,000 entries eachBit memory tableNoneMaximum of 1,000 bitsMathematical tableNone256 entries max.Calculations can be executedautomatically in the PT.Image dataNoneMaximum of 4,095 (224 for compatibility with NT20S)Library dataNoneMaximum of 12,288 (896 for compatibility with NT20S)Graphic figures (rectangles, polygons, circles/ovals, sectors, filling)None65,535 total per screen, including otherfixed objectsImage library displaysNone256 per screen max.Analog metersNone50 per screen max.Trend graphsNone1 per screen max.Broken-line graphsNone1 per screen max.Alarm lists/historyNone4 per screen max.Recipe functionNone1 per screen max.WindowsNone3 per max.Method for storing numeric values(numeral memory data and PT Status Control Area)BCD (binary-coded decimal)BCD (binary-coded decimal) or binaryPT Status Control Area size4 words5 words (partial change of contents)(4 words for compatibility with NT20S)PT Status Notify Area size3 words2 words (partial change of contents)(3 words for compatibility with NT20S)Screen datacapacity*3Possible(User program memory)8SectionFunctions of the NT21, NT31/NT31C and NT631/NT631CItemNT20S1-2NT21Window Control Area sizeNone9 wordsClock Data Area sizeNone4 wordsRegistering continuous screensPossibleNot possible (Use screen switches asa substitute.)System tenkeyPossibleNot possible (Use normal tenkey as asubstitute.)Lamp/Touch switch labelsFixed display (1 line only)-Interlock functionNoneOperations can be disabled from thePC by allocating interlock bits to thecorresponding touch switch, numeralinput, character string input,thumbwheel switches, or recipeobjects.Programming Console functionNot possible.Possible.Bar code reader connectionNot possible.Possible.High-quality font displayNot possible.Possible.Character codesCP437 (DOS)CP437 (DOS) or ISO8859/1 (Windows)Accessible CS/CJ PC data Areas---The data areas listed below can beaccessed in addition to the data areasaccessible with the NT20S.*4- EM banks (EM_0 to EM_C)- Timer Completion Flags (TU)- Counter Completion Flags (CU)- Work Areas (WR)- Task Flags (TK)- HR Area (HR)*1:*2:*3:*4:Multiple lines can be displayedON/OFF switching is possibleNumeral display is possibleCharacter string display is possibleThe Battery is optional.The NT20S-ST128 supports RS-232C communications commands instead of memory links.This is the capacity of the flash memory that stores screen data.These data areas are accessible only when the PT is connected to the CS/CJ-series PC in a 1:N NT Link.

(They arenot accessible through host link communications.)For differences in programming, refer to Appendix B Compatibility with ScreenData of Other PT Models on page 441.9SectionFunctions of the NT21, NT31/NT31C and NT631/NT631C1-2Comparison between NT30/NT30C and NT31/NT31CItemNT30/NT30CNT31/NT31CCompatible Support Tool(s)NT-ZJCAT1-EV4 orNT-ZA3AT-EV2NT-ZJCAT1-EV4DIP switch settingsOn rear of unitNone (software settings)Use of B7A Interface UnitPossibleNot possibleUse of Memory UnitNot possiblePossibleRS-232C interfaceConnector (9-pin) also used as port forscreen data transfer.- Serial port A connector (also usedfor screen data transfer, 9-pin)- Serial port B connector (for hostcommunications only, 25-pin)RS-422A/485 interfaceTerminal blockSerial port B (25-pin D-SUB connector)Replacement backlightNT30-CFL01/NT30C-CFL01NT31C-CFL01 (common use)NT31/NT31C system program dataNT-ZS3AT-EV1(including system installer)The system installer and systemprogram data are supplied with theSupport Tool.High-speed 1:N NT LinkNot possiblePossible*1MemoryyLi kLinkSystem programExclusive use by Memory LinkSame as OMRON connectionScreen dataShared with OMRON connectionExclusive use by Memory LinkLCD contrast adjustmentBy a control on the rear of the unitBy touch panel operationBacklight brightness adjustmentNot possibleBy touch panel operationNumber of user-registered screens2,000 max.3,999 max.Screen data capacity*2512 KB1 MBNumeral string data1,000 max.2,000 max.Character string data1,000 max.2,000 max.Bit data2561,000 max.Mathematical tableNone256 entries max.Calculations can be executedautomatically in the PT.*1Image data224 max.4,095 max.*3Library data896 max.12,288 max.*3(User program memory)Method for storing numeric valuesFixed as BCD (binary coded decimal)(numeral memory data and PT statuscontrol area)Selectable from BCD (binary codeddecimal) or binaryPT status control area size4 words5 words (partial change of contents)*3PT status notify area size3 words2 words (partial change of contents)*3Window control area sizeNone9 words*4Registering continuous screenPossibleNot possible (Use a screen switchoveras a substitute.)Lamp/Touch switch guide charactersFixed display (1 line only)-Interlock functionNoneOperations can be disabled from thePC by allocating interlock bits to thecorresponding touch switch, numeralinput, or character string input.*1Device monitor functionNot possiblePossible*110Multiple lines can be displayed*1ON/OFF switching is possible*1Numeral display is possible*1Character string display is possible*1SectionFunctions of the NT21, NT31/NT31C and NT631/NT631CItemNT30/NT30C1-2NT31/NT31CRecipe functionNonePossible*1Accessible CS/CJ-series PC dataareas---The data areas listed below can beaccessed in addition to the data areasaccessible with the NT30/NT30C.*5- EM banks (EM_0 to EM_C)- Timer completion flags (TU)- Counter completion flags (CU)- Work Area (WR)- Task flags (TK)- HR Area*1: These functions are available only in V2 versions of the NT31/NT31C.*2: This is the capacity of the flash memory that stores screen data.*3: The values are the same as the NT30/NT30C when the PT is in NT30/620 compatible mode.*4: The window control area can be used only in version V1 or later of the NT31/NT31C.*5: These data areas are accessible only when the PT is connected to the CS/CJ-series PC in a 1:N NT Link.

Характеристики

Тип файла
PDF-файл
Размер
3,16 Mb
Тип материала
Высшее учебное заведение

Список файлов учебной работы

Свежие статьи
Популярно сейчас
Зачем заказывать выполнение своего задания, если оно уже было выполнено много много раз? Его можно просто купить или даже скачать бесплатно на СтудИзбе. Найдите нужный учебный материал у нас!
Ответы на популярные вопросы
Да! Наши авторы собирают и выкладывают те работы, которые сдаются в Вашем учебном заведении ежегодно и уже проверены преподавателями.
Да! У нас любой человек может выложить любую учебную работу и зарабатывать на её продажах! Но каждый учебный материал публикуется только после тщательной проверки администрацией.
Вернём деньги! А если быть более точными, то автору даётся немного времени на исправление, а если не исправит или выйдет время, то вернём деньги в полном объёме!
Да! На равне с готовыми студенческими работами у нас продаются услуги. Цены на услуги видны сразу, то есть Вам нужно только указать параметры и сразу можно оплачивать.
Отзывы студентов
Ставлю 10/10
Все нравится, очень удобный сайт, помогает в учебе. Кроме этого, можно заработать самому, выставляя готовые учебные материалы на продажу здесь. Рейтинги и отзывы на преподавателей очень помогают сориентироваться в начале нового семестра. Спасибо за такую функцию. Ставлю максимальную оценку.
Лучшая платформа для успешной сдачи сессии
Познакомился со СтудИзбой благодаря своему другу, очень нравится интерфейс, количество доступных файлов, цена, в общем, все прекрасно. Даже сам продаю какие-то свои работы.
Студизба ван лав ❤
Очень офигенный сайт для студентов. Много полезных учебных материалов. Пользуюсь студизбой с октября 2021 года. Серьёзных нареканий нет. Хотелось бы, что бы ввели подписочную модель и сделали материалы дешевле 300 рублей в рамках подписки бесплатными.
Отличный сайт
Лично меня всё устраивает - и покупка, и продажа; и цены, и возможность предпросмотра куска файла, и обилие бесплатных файлов (в подборках по авторам, читай, ВУЗам и факультетам). Есть определённые баги, но всё решаемо, да и администраторы реагируют в течение суток.
Маленький отзыв о большом помощнике!
Студизба спасает в те моменты, когда сроки горят, а работ накопилось достаточно. Довольно удобный сайт с простой навигацией и огромным количеством материалов.
Студ. Изба как крупнейший сборник работ для студентов
Тут дофига бывает всего полезного. Печально, что бывают предметы по которым даже одного бесплатного решения нет, но это скорее вопрос к студентам. В остальном всё здорово.
Спасательный островок
Если уже не успеваешь разобраться или застрял на каком-то задание поможет тебе быстро и недорого решить твою проблему.
Всё и так отлично
Всё очень удобно. Особенно круто, что есть система бонусов и можно выводить остатки денег. Очень много качественных бесплатных файлов.
Отзыв о системе "Студизба"
Отличная платформа для распространения работ, востребованных студентами. Хорошо налаженная и качественная работа сайта, огромная база заданий и аудитория.
Отличный помощник
Отличный сайт с кучей полезных файлов, позволяющий найти много методичек / учебников / отзывов о вузах и преподователях.
Отлично помогает студентам в любой момент для решения трудных и незамедлительных задач
Хотелось бы больше конкретной информации о преподавателях. А так в принципе хороший сайт, всегда им пользуюсь и ни разу не было желания прекратить. Хороший сайт для помощи студентам, удобный и приятный интерфейс. Из недостатков можно выделить только отсутствия небольшого количества файлов.
Спасибо за шикарный сайт
Великолепный сайт на котором студент за не большие деньги может найти помощь с дз, проектами курсовыми, лабораторными, а также узнать отзывы на преподавателей и бесплатно скачать пособия.
Популярные преподаватели
Добавляйте материалы
и зарабатывайте!
Продажи идут автоматически
6392
Авторов
на СтудИзбе
307
Средний доход
с одного платного файла
Обучение Подробнее