Quadera Pfeiffer программа управления (1248465), страница 8
Текст из файла (страница 8)
Itis used to switch the presentation of this axis.•LinearLinear axis scaling•LogarithmicLogarithmic axis scaling•FixedRange of the axis is fixed•AutomaticRange of the axis is adjusted to the measuredvaluesContext menu "Legend"This context menu is available only when the chart legend is shown (viacontext menu "Chart"). Click on a measurement task in the legend toopen this context menu.•ChartElementIndicates the measurement task related to theinvoked context menu.•Axis Y1The measuring data display of the indicatedmeasurement task uses the left y-axis.
You candefine the y-axis for each measurement task,i.e. if the left or right y-axis is used for thistask.Only for MID/MCD recipes•Axis Y2The measuring data display of the indicatedmeasurement task uses the right y-axis.Context menu "Axis Y2" becomes available. Youcan define the y-axis for each measurementtask, i.e. if the left or right y-axis is used forthis task.Only for MID/MCD recipes•Color...Opens the "Color" dialog to select the color forthe chart display of the measurement task(curve color).Note that you can also define the line thicknessof the curve.64QUADERAContext Menu "Docker Window"NOTE:This context menu is only available for the docker windows (Toolbox, DeviceStatus View, Event View), but not for the measurement project window andthe start page.Click with the right mouse button into the docker window title.
The context menu"Docker Window" appears. It contains the following functions:•DockableCheckbox: Specify if the selected docker windowis dockable or not.•No:The behavior of the docker window is thesame as known from a normal window. Itappears in the window list, in the bottompart of the Window menu.•Yes:When you move the docker window variousanchoring points are displayed on the userinterface. The "Floating" property isautomatically assigned to the docker windowif you do not move it on an anchoring point.Note that you can move the toolbox only tothe displayed anchoring points.•HideCheckbox: Specify if the selected docker windowis shown or hidden. Use the View menu to showa hidden window.•FloatingCheckbox: Specify if the selected docker windowcan be moved freely (even outside of thewindow of the related application).Note:•Auto Hide•"Floating" docker windows are always"Dockable",•The "Floating" property can not be assignedto the toolbox.Checkbox: Specify if the auto-hide function isenabled for the selected docker window, i.e.
thecorresponding docker window will beautomatically hidden and shown if needed.65QUADERA HTML HelpCapturing Screenshots of the User InterfaceAs a written documentation for your measurement projects you can capture and printout screens of the QUADERA® user interface. Proceed as follows:1. Capture the screen. The screenshot is copied into the Windows clipboard:• Full screen capture: press the key combination "CTRL+Print",• Active window capture: press the key combination"CTRL+ALT+Print".2.
Open a suited image editor, e.g. Microsoft Paint (Windows start menu >Programs > Accessories > Paint).3. Paste the screenshot from the Windows clipboard into the image editor, e.g.press the key combination "CTRL+V".4. Use the image editor to print out the screenshot.NOTE:Various screen capture tools are available as freeware, shareware, and bypurchasing.
In general, these tools provide enhanced screen capturefeatures than the procedure described above.66QUADERAGetting StartedStarting QUADERA®You can start QUADERA® from the Windows Start menu or from the desktop.Windows Start menu1. Click the Windows Start button and select the All Programs entry.2. Select the QUADERA program group and click the QUADERA entry.DesktopYou can start QUADERA® from the desktop if a shortcut has been created for thedesktop during installation.1. Double-click the QUADERA shortcut symbol on your desktop.After starting QUADERA®, the start page is displayed.67QUADERA HTML HelpStart PageNOTE:Continuing the measurement using an existing measurement project is notpossible.After starting QUADERA®, the start page is displayed.
Here you can perform one ofthe following actions:•Open existing measurement projects (*.qmp files) and work with them:• Click on the File icon. All measurement projects that have been worked onrecently are shown in a list. Select the required project and open it withOK or by double-clicking it.• Click the More... button to open a measurement project that is not presentin the list.•Selecting templates to start new measurements: click on the icon for therequired device.• If you want to start a new measurement:Click on the "Templates" bar and select the desired template(measurement project templates *.qmt in the "Templates" list).• If you want to calibrate the device:Click on the "Calibration and Tuning" bar and select the desired template(calibration templates *.qmt in the "Calibration and Tuning" list).• Only QMG220: If you want to start a new RGA application (Residual GasAnalysis):Click on the "RGA Application" bar and select the desired template(measurement project templates *.qmt in the "RGA Application" list).If the start page is not displayed, you can call it up as follows:68•In the View menu, click Show Start Page.
The start page is displayed.•Only if the start page is already open: In the Window menu, click therespective item in the list of open windows.QUADERAExample of a MeasurementIntroductionThe goal of the measurement is to analyze the composition of air. For this, we do notperform a real measurement in vacuum. Instead, we are going to use the simulationmode of QUADERA® and the stored simulation data which represent a typicalmeasurement of air with a Faraday detector.
Except for small details, the course of ameasurement is the same for all mass spectrometers.69QUADERA HTML HelpCourse of a Measurement - ScanNOTE:For software training and in order to practice the measurement runs werecommend that QUADERA® be used in the simulation mode.The scan measurement type (ion current as a function of m/e) is suitable forobtaining an overview of all present gases.1.
Open the start page: In the View menu, click Show Start Page.2. Click on the icon for the required device.3. Create a new measurement project: In the "Templates" list, double-click e.g.Airdemo Scan Analog.qmt. This way you create a new measurement projectbased on the selected template.Please note: The file extension for templates is *.qmt4. The new measurement project window appears. The working area displays thescan project.• Edit the recipe (if necessary): Click the Edit tab.• Display the measuring data: Click the Measure tab.NOTE:You can start the measurement regardless whether the recipe editor or theworking area has been selected.5. Start the measurement: In the device status view, click on the "Start" icon.The connection to the device is automatically established.
The device nowreceives the parameters for the current measurement task. You can adjust thechart layout while the measurement is running.6. Stop the measurement: In the device status view, click on the "Stop" icon.7. Close and save the measurement project.
In the File menu, click Close. Youare requested if you want to save the measurement project. QUADERA®suggests an automatically generated file name that is based on date/time ofthe measurement and the used template.• Yes: the "Save As" window used for saving measuring data opensup. Select a suitable name and path and then click Save. Themeasurement project will be saved and closed.Please note: The file extension for measurement projects is *.qmp• No: the measurement project will be closed without saving thedata.• Cancel: the action is cancelled.
You will return to the measurementproject without saving the data.70QUADERACourse of a Measurement - MIDNOTE:For software training and in order to practice the measurement runs werecommend that QUADERA® be used in the simulation mode.The MID measurement type (Multiple Ion Detection) is suitable for observing changesof several gases with time.1. Open the start page: In the View menu, click Show Start Page.2.
Click on the icon for the required device.3. Create a new measurement project: In the "Templates" list, double-click e.g.Airdemo MID.qmt. This way you create a new measurement project basedon the selected template.Please note: The file extension for templates is *.qmt4. The new measurement project window appears. The working area displays theMID project.• Edit the recipe (if necessary): Click the Edit tab.• Display the measuring data: Click the Measure tab.NOTE:You can start the measurement regardless whether the recipe editor or theworking area has been selected.5. Start the measurement: In the device status view, click on the "Start" icon.The connection to the device is automatically established. The device nowreceives the parameters for the current measurement task.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
