Lab16 (1130250)
Текст из файла
Лабораторная работа № 16. Использование команд "show ARP" и "clear ARP"
Objectives:
-
Become familiar with the router show ARP command.
-
Become familiar with the router clear ARP command.
Step 1 - Login to the router.
Explanation: Connect to the router and login. Enter the password cisco if prompted.
Step 2 - Show the router's ARP table.
Task: Enter show arp at the router prompt.
Explanation: The router will respond with the ARP table that shows IP address to MAC address to interface number.
1. What three (3) important pieces of information are displayed?
Step 3 - Enter privileged mode.
Task: a. Enter enable at the command prompt.
b. Enter the password of class.
Explanation: You use the enable command to enter privileged EXEC mode.
Step 4 - Enter the help command.
Task: Enter the help command by typing ? at the router prompt.
Explanation: The router responds with all commands available in Privileged-Mode.
2 a. What is the significance of entering ? at the router prompt?
2 b. Does the clear command appear as an option?
Step 5 - Clear the ARP table.
Task: Enter clear arp command at the router prompt.
Explanation: The router will clear the arp table.
Step 6 - Show the ARP table.
Task: Enter show arp command at the router prompt.
Explanation: The router will respond with the ARP table.
3. Are there any entries in the ARP table?
4. Looking at the IP address of the ARP entries what are the entries for?
Step 7 - Generate network traffic.
Task: Ping all interfaces on the network.
Explanation: This will generate network traffic between routers.
Step 8 - Show the ARP table.
Task: Enter show arp command at the router prompt.
Explanation: The router will respond with the ARP table.
5. Are there any new entries in the ARP table?
Step 9 - Generate network traffic.
Task: Open an MS-DOS command prompt (Start/Programs/MS DOS Command Prompt). Ping all the workstations on the lab network. Note: You will have to make sure that all workstations have proper IP addressing for the network they are connected to and a default gateway.
Explanation: This will generate network traffic from workstation to workstation.
Step 10 - Show the ARP table.
Task: Enter show arp command at the router prompt.
Explanation: The router will respond with the ARP table.
6. Are there any new entries in the ARP table?
7. Explain why there were no new entries in step 8 and there are in step 10.
Step 11 - Exit the router.
2
Характеристики
Тип файла документ
Документы такого типа открываются такими программами, как Microsoft Office Word на компьютерах Windows, Apple Pages на компьютерах Mac, Open Office - бесплатная альтернатива на различных платформах, в том числе Linux. Наиболее простым и современным решением будут Google документы, так как открываются онлайн без скачивания прямо в браузере на любой платформе. Существуют российские качественные аналоги, например от Яндекса.
Будьте внимательны на мобильных устройствах, так как там используются упрощённый функционал даже в официальном приложении от Microsoft, поэтому для просмотра скачивайте PDF-версию. А если нужно редактировать файл, то используйте оригинальный файл.
Файлы такого типа обычно разбиты на страницы, а текст может быть форматированным (жирный, курсив, выбор шрифта, таблицы и т.п.), а также в него можно добавлять изображения. Формат идеально подходит для рефератов, докладов и РПЗ курсовых проектов, которые необходимо распечатать. Кстати перед печатью также сохраняйте файл в PDF, так как принтер может начудить со шрифтами.