Lab18 (1130254)
Текст из файла
Лабораторная работа № 18. Разработка IP адресации и выделение подсетей
Objectives:
This Lab will focus on your ability to accomplish the following tasks:
-
Design and implement a 5-router network topology
-
Develop an IP addressing scheme based on the topology
-
Use a single Class C network address with subnets for LANs and WANs
-
Assign IP addresses to router interfaces and hosts
-
Diagram the network using ConfigMaker
Step 1 - Design the physical topology of the network.
You should have at least 5 routers in different geographical locations. You should have at least one Ethernet LAN off of each router. Sketch out the topology as you go. Answer the following questions to assist in planning:
1. How many routers will you have?
2. Where will the routers be located?
3. How many switches will you have?
Step 2 - Develop an IP addressing scheme.
Review your topology sketch from step one. Using a single Class C address of 204.204.7.0, create a subnetwork design for your topology. Document your scheme by indicating where you will put each of the subnets. Answer the following questions to assist in planning.
4. How many LANs are there?
5. How many WANs are there?
6. How many unique subnets will you need?
7. How many hosts per subnet (LAN and WAN) will you have?
8. How many IP addresses (hosts + router interfaces) will be required?
9. What is your Class C network address?
10. How many bits will you borrow from the host portion of the network address?
11. What will your subnet mask be?
12. How many total useable subnets will this allow for?
13. How many hosts per subnet will this allow for?
Step 3 - Assign IP addresses to each device interface.
Using the table assign an IP address to each device interface or range of devices (hosts) that will require an IP address. Switches do not require an IP address but you may assign one if you want to. Hubs will not have an IP address. (answers will vary)
Device name / model | Interface | IP address | Subnet mask | Default gateway |
14. Which interfaces will require clock rate to be set?
Step 4 - Diagram the network using ConfigMaker.
Use Cisco ConfigMaker to create a network diagram and add all configuration information such as IP addresses and subnet masks. ConfigMaker will allow you to enter all interface IP addresses and help you create a finished diagram. You should be familiar with ConfigMaker if you have completed lab 6.5.2.2. Use the web site listed in the overview section to download ConfigMaker if you do not have it.
Reflection:
3
Характеристики
Тип файла документ
Документы такого типа открываются такими программами, как Microsoft Office Word на компьютерах Windows, Apple Pages на компьютерах Mac, Open Office - бесплатная альтернатива на различных платформах, в том числе Linux. Наиболее простым и современным решением будут Google документы, так как открываются онлайн без скачивания прямо в браузере на любой платформе. Существуют российские качественные аналоги, например от Яндекса.
Будьте внимательны на мобильных устройствах, так как там используются упрощённый функционал даже в официальном приложении от Microsoft, поэтому для просмотра скачивайте PDF-версию. А если нужно редактировать файл, то используйте оригинальный файл.
Файлы такого типа обычно разбиты на страницы, а текст может быть форматированным (жирный, курсив, выбор шрифта, таблицы и т.п.), а также в него можно добавлять изображения. Формат идеально подходит для рефератов, докладов и РПЗ курсовых проектов, которые необходимо распечатать. Кстати перед печатью также сохраняйте файл в PDF, так как принтер может начудить со шрифтами.