Lab9 (1130235)

Просмтор этого файла доступен только зарегистрированным пользователям. Но у нас супер быстрая регистрация: достаточно только электронной почты!

Текст из файла

Лабораторная работа № 9. Использование команды "show" при работе с маршрутизатором

Objectives:

• Become familiar with the basic router show commands

• Retrieve the current running configuration of the router in RAM using show running-config

• View the backup configuration file in NVRAM using show startup-config

• View the IOS file information using show flash and show version

• View current status of the router interfaces using show interface

• View status of any configured layer 3 protocol using show protocol

Step 1 - Log on to router.

Explanation: Connect to the router and login. Enter the password cisco if prompted.

Step 2 - Enter the help command.

Task: Enter the help command by typing (?) at the router prompt.
Explanation: The router responds with all commands available in User-Mode.

1a. What did the router reply back with ?

1b. Are all router commands available at the current prompt?

2. Is show one of the options available?

Step 3 - Display help for the show command.

Task: Enter the show ? command
Explanation: The router responds with sub-commands available as part of the show command in user mode.

3. List three user mode sub-commands available as part of the show command.

Step 4 - Display IOS version and other important information with the show version command.

Task: Enter the show version command.
Explanation: The router will return information about the IOS that is running in RAM.

4. With information from the show version command - Answer the questions below:

a. What is the IOS version?

b. What is the name of the system image (IOS) file?

c. Where was the router IOS image booted from?

d. What type of processor (CPU) and how much RAM does this router have?

e. How many Ethernet interfaces does this router have? ____ How many Serial interfaces? ____

f. The router backup configuration file is stored in Non-Volatile Random Access Memory (NVRAM). How much NVRAM does this router have?

g. The router operating system (IOS) is stored in Flash memory. How much flash memory does this router have?

h. What is the Configuration register set to?

Step 5 - Displaying the routers time and date.

Task: Enter the show clock command.
Explanation: The show clock command will show the current time and date.

5. What information is displayed with show clock?

Step 6 - Displaying a cached list of host names and addresses.

Task: Enter show hosts command.
Explanation: The show hosts command displays a cached list of hosts and all of their interface IP addresses.

6. What information is displayed with show hosts?

Step 7 - Display users that are connected to the router.

Task: Enter show users command.
Explanation: The show users command displayed users that are connected to the router.

7. What information is displayed with show users?

Step 8 - Showing the command buffer.

Task: Enter show history command.
Explanation: The show history command displays a history of commands that have been entered.

8. What information is displayed with show history?

Step 9 - Enter the privileged mode.

Task: a. From user EXEC mode, enter privileged EXEC mode using the enable command.
b. Enter the enable password of class.
Explanation: Enter the enable mode from the User EXEC mode.

9a. What command did you use to enter privileged mode?



9b. How do you know if you are in privileged-mode?

Step 10 - Enter the help command.

Task: Enter show ? command at the router prompt.
Explanation: The router responds with the sub-commands available within the show command for Privileged-mode.

10a. What did the router reply back with when show ? was entered at the #?

10b. How is this output different from the one you got in user mode in step 3?

Step 11 - Show the router ARP table.

Task: Enter the show arp command at the router prompt.

Step 12 - Show information about the Flash memory device.

Task: Enter show flash at the router prompt.
Explanation: The router will respond with information about the flash memory and what IOS file(s) are stored there.

12. Document the following information with show flash.

a. How much flash memory is available and used?



b. What is the file that is stored in flash memory?



c. What is the total size in bytes of the flash memory?

Step 13 - Show information about the active configuration file.

Task: Enter show running-config (or show run) at the router prompt.
Explanation: The router will display information on how it is currently configured.

13. What important information is displayed with show run?

Step 14 - Show information about the backup configuration file.

Task: Enter show startup-config (or show start) at the router prompt.
Explanation: The router will display information on the backup configuration file stored in NVRAM.

14. What important information is displayed with show start and where in the router is this information kept?

Step 15 - Display statistics for all interfaces configured on the router.

Task: Enter show interface at the router prompt.
Explanation: The router shows information about the configured interfaces.

15a. Find the following information for interface Ethernet 0 with show interface:

1. What is MTU?



2. What is Rely?



3. What is Load?



4. What is a Runt?



5. What is a Giant?

15b. Find the following information for interface serial0 with Show Interface:

1. What is the IP address and subnet mask?

2. What data link layer encapsulation is being used?



3. What does "Serial0 is up, line protocol is up" mean?

Step 16 - Display the protocols configured on the router.

Task: Enter show protocol at the router prompt.
Explanation: This command shows the global and interface-specific status of any configured Layer 3 protocols.

16. What important information is displayed?



16b. Enter exit at the router prompt.

4

Характеристики

Тип файла документ

Документы такого типа открываются такими программами, как Microsoft Office Word на компьютерах Windows, Apple Pages на компьютерах Mac, Open Office - бесплатная альтернатива на различных платформах, в том числе Linux. Наиболее простым и современным решением будут Google документы, так как открываются онлайн без скачивания прямо в браузере на любой платформе. Существуют российские качественные аналоги, например от Яндекса.

Будьте внимательны на мобильных устройствах, так как там используются упрощённый функционал даже в официальном приложении от Microsoft, поэтому для просмотра скачивайте PDF-версию. А если нужно редактировать файл, то используйте оригинальный файл.

Файлы такого типа обычно разбиты на страницы, а текст может быть форматированным (жирный, курсив, выбор шрифта, таблицы и т.п.), а также в него можно добавлять изображения. Формат идеально подходит для рефератов, докладов и РПЗ курсовых проектов, которые необходимо распечатать. Кстати перед печатью также сохраняйте файл в PDF, так как принтер может начудить со шрифтами.

Список файлов лабораторной работы