H126-E2-02 E5CN(-U) Datasheet (Техническая документация)
Описание файла
Файл "H126-E2-02+E5CN(-U)+Datasheet" внутри архива находится в следующих папках: Техническая документация, 8. Температурный контроллер OMRON E5CN. PDF-файл из архива "Техническая документация", который расположен в категории "". Всё это находится в предмете "инструментальные средства" из 9 семестр (1 семестр магистратуры), которые можно найти в файловом архиве МПУ. Не смотря на прямую связь этого архива с МПУ, его также можно найти и в других разделах. Архив можно найти в разделе "остальное", в предмете "инструментальные средства" в общих файлах.
Просмотр PDF-файла онлайн
Текст из PDF
Digital Temperature ControllersE5CN/E5CN-UThis Best-selling General-purpose 48×48-mmTemperature Controller Is Now Even Better.USB-Serial Conversion Cable and SupportSoftware Are Also Available.• Controllers now available with analog inputs.• Faster sampling at 250 ms.• Transfer output provided for easy output to recorders.• Voltage outputs (to drive SSRs) for both heating and coolingcontrol. Can be used for alarms to provide three alarm outputs.• Models available with three-phase heater burnout detection andSSR fault detection.• Easy setting with 11-segment displays.• Connect to either a thermocouple or platinum resistancethermometer with the same model.• Easily see the status from a distance with PV display with threecolor switching function.• Setting protection indicator informs operator when protection isenabled.• Manual output provided.• Controller available with long-life relay output.• Models available with external power supply for ES1B InfraredThermosensor.Note: Refer to page 19 for information on changes in comparison toprevious models.Note: Refer to Precautions on page 21.FeaturesImproved Functions for a Wider Range of ApplicationControl Analog Values, such as Pressures, Flowrates,and LevelsThe E5CN Series now also includes models that accept analoginputs, enabling control applications other than for temperature,including pressure, flowrate, level, humidity, and weight control.Voltage Outputs (to Drive SSRs) for Both Heating andCooling Control.
Can Be Used for Alarms to ProvideThree Alarm Outputs.Voltage outputs can be used for both heating and cooling for Modelswith Two Control Outputs. Also, control output 2 can be set for use asan alarm output, to enable using up to three alarm outputs.Note: E5CN-@L (Models with Analog Inputs)Note: E5CN-@Q (Option Board)Faster Sampling at 250 msThe previous sampling time of 500 ms has been reduced by half to250 ms. This enables the E5CN to handle application requiring evengreater response speed and accuracy.Three-phase Heater Burnout DetectionA transfer output now makes it easy to connect to a recorder or PLCAnalog I/O Unit.With Models with Three-phase Heater Burnout and SSR FailureDetection, two current transformers can be connected to detect bothheater burnout and SSR failure at the same time, reducing costsbecause a separate heater burnout alarm device is not required.SSR failure detection can be used even with Models with Singlephase Heater Burnout Alarms.Note: E5CN-C@ (Models with Current Outputs)Note: E5CN-@HH@ (Option Board)Easy Connector to a RecorderE58-CIFQ1 USB-Serial Conversion Cable for Computer ConnectionA personal computer connection is possible for models without communications.The CX-Thermo Support Software (sold separately) can be used to set parameters, monitor operation, andparameter masks.
The free ThermoMini Parameter Copy Software can be used to reach E5CN parametersusing communications and copy them to another E5CN to increase onsite productivity.Specifications: page 5, Dimensions: page 11Related Product• EST2-2C-MV1 CX-Thermo Support Software• ES1B Infrared ThermosensorDigital Temperature ControllersE5CN/E5CN-U1Model Number Structure■ Model Number LegendControllersE5CN-@@M@-5001 2 3 41.
Output typeR: RelayQ: Voltage (for driving SSR)C: CurrentY: Long-life relay2. Number of alarmsBlank: No alarm2:Two alarms3. Option UnitM:Option Unit can be mounted4. Input typeT: Thermocouple/platinum resistance thermometer (multi-input)L: Analog inputOption UnitsE53-CN-@N11. FunctionsH03: Communications and heater burnout/SSR failure detection03:CommunicationsHB: Heater burnout/SSR failure detection and event inputsB:Event inputsHH03: Communications and 3-phase heater burnout/SSR failuredetectionQ03: Communications and control output 2 (voltage output)QH: Heater burnout/SSR failure detection and control output 2(voltage output)PB:External power supply for ES1B and event inputsPH: External power supply for ES1B and heater burnout/SSRfailure detection.Note: 1.
The heating and cooling function is available for models withtwo alarm points.2. Current transformers (CTs) are not provided with the Units.Be sure to order CTs when ordering the E5CN and the Option Units.3. Specify the power supply specifications when ordering.This data sheet is provided as a guideline for selecting products. Be sure to refer to the following user manuals for application precautionsand other information required for operation before attempting to use the product.E5CN/E5CN-U Temperature Controller User's Manual (Cat. No. H129)E5CN Temperature Controller Communications User's Manual (Cat.
No. H130)2Digital Temperature Controllers E5CN/E5CN-UOrdering Information■ Controllers with Temperature Inputs (Multi-input)SizePower supply voltageNumber of alarm points1/16 DIN100 to 240 VAC48 × 48 × 78 (W × H × D)0Control outputsModelRelayE5CN-RMT-500Voltage (for driving SSR) E5CN-QMT-5002CurrentE5CN-CMT-500RelayE5CN-R2MT-500Voltage (for driving SSR) E5CN-Q2MT-50024 VAC/DC0CurrentE5CN-C2MT-500Long-life relayE5CN-Y2MT-500RelayE5CN-RMT-500Voltage (for driving SSR) E5CN-QMT-5002CurrentE5CN-CMT-500RelayE5CN-R2MT-500Voltage (for driving SSR) E5CN-Q2MT-500CurrentE5CN-C2MT-500■ Controllers with Analog InputsSizePower supply voltageNumber of alarm points1/16 DIN100 to 240 VAC48 × 48 × 78 (W × H × D)0Control outputsModelRelayE5CN-RML-500Voltage (for driving SSR) E5CN-QML-5002CurrentE5CN-CML-500RelayE5CN-R2ML-500Voltage (for driving SSR) E5CN-Q2ML-50024 VAC/DC2CurrentE5CN-C2ML-500Long-life relayE5CN-Y2ML-500RelayE5CN-R2ML-500Voltage (for driving SSR) E5CN-Q2ML-500CurrentE5CN-C2ML-500■ Option UnitsThe E5CN provides optional functionality when one of the following Option Units is mounted.FunctionsCommunicationsModelHeater burnout/SSR failure detectionE53-CNH03NCommunicationsE53-CN03NHeater burnout/SSR failure detectionEvent inputsE53-CNHBNEvent inputsCommunicationsE53-CNBN3-phase heater burnout/SSR failure detectionE53-CNHH03NCommunicationsControl output 2 (voltage output) E53-CNQ03NHeater burnout/SSR failure detectionControl output 2 (voltage output) E53-CNQHNEvent inputsExternal power supply for ES1B E53-CNPBN(See note 1.)Heater burnout/SSR failure detectionExternal power supply for ES1B E53-CNPHN(See note 1.)Note: 1.
E53-CNPBN and E53-CNPHN cannot be mounted on E5CN-C@@ (current output models).2. Option Units cannot be used for Plug-in models.These Option Units can be used for the new E5CN models only.E53-CNH03NCommunications/CTBE53-CNHBNEvent inputs/CT1111RS-485AE53-CN03NCommunicationsBE53-CNBNEvent inputs1111RS-48512Do notuse. 13EV1EV214CT1121314CT11515AE53-CNHH03NCommunications/Two CTsB11RS-48512Do not13use.Do not14use.Do not15use.EV1EV212A13Do not14use.Do not15use.E53-CNQ03NCommunications/Control output 2B11RS-4851213A12Do notuse. 13E53-CNQHNControl output 2/CT+11 Voltageoutput−12 21 mAControloutput 21415+Controloutput 2−1414CT1151112 VDC,Do notuse.
13CT2CT1E53-CNPBNEvent inputs/External powersupply for ES1B15Attach the appropriate terminal labels.Digital Temperature Controllers12EV1EV213E53-CNPHNExternal power supplyfor ES1B/CT12 VDC±10%20 mA +11External power12−Do not13use.+14External power15−12 VDC±10%20 mAE5CN/E5CN-U14CT1153Model Number Structure■ Model Number Legend (Plug-in-type Controllers)E5CN-@@@U1 2 3 43.
Input typeT: Thermocouple/platinum resistance thermometer (multi-input)4. Plug-in typeU: Plug-in type1. Output typeR: RelayQ: Voltage2. Number of alarmsBlank: No alarm1:One alarm2:Two alarmsOrdering Information (Plug-in-type Controllers)■ Controllers with Temperature Inputs (Multi-input)SizePower supply voltage1/16 DIN100 to 240 VACNumber of alarm points0Control outputsModelRelayE5CN-RTUVoltage (for driving SSR) E5CN-QTU1RelayE5CN-R1TUVoltage (for driving SSR) E5CN-Q1TU2RelayE5CN-R2TUVoltage (for driving SSR) E5CN-Q2TU24 VAC/DC0RelayE5CN-RTUVoltage (for driving SSR) E5CN-QTU1RelayE5CN-R1TUVoltage (for driving SSR) E5CN-Q1TU2RelayE5CN-R2TUVoltage (for driving SSR) E5CN-Q2TUNote: Option Units (E53-CN@@N) cannot be used for Plug-in models.■ Accessories (Order Separately)USB-Serial Conversion CableAdapterModelConnectable modelsTerminal typeE58-CIFQ1ModelY92F-45Terminal CoverNote: Use this Adapter when the panel has been previously preparedfor the E5B@.Connectable modelsTerminal typeModelE53-COV10Sockets(for Models with Plug-in Connectors)Note: The Terminal Cover comes with the E5CN-@@@-500 models.Current Transformers (CTs)ModelE54-CT1E54-CT3Hole diameter5.8 dia.12.0 dia.4ModelP2CF-11P2CF-11-EP3GA-11Y92A-48GTypeFrontconnectingSocketFrontconnectingSocket withFingerProtectionBackconnectingsocketTerminalCover forFingerProtectionDigital Temperature Controllers E5CN/E5CN-USpecifications■ RatingsItemPower supplyvoltage100 to 240 VAC, 50/60 Hz24 VAC, 50/60 Hz or 24 VDCOperating voltage range85% to 110% of rated supply voltagePowerE5CNconsumption E5CN-U7.5 VA max.
(E5CN-R2T: 3.0 VA at 100 VAC)5 VA/3 W max. (E5CN-R2T: 2.7 VA at 24 VAC)6 VA max.3 VA/2 W max.Sensor inputModels with temperature inputsThermocouple: K, J, T, E, L, U, N, R, S, or BPlatinum resistance thermometer: Pt100 or JPt100Infrared temperature sensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, or 160 to 260°CVoltage input: 0 to 50 mVModels with analog inputsCurrent input: 4 to 20 mA or 0 to 20 mAVoltage input: 1 to 5 V, 0 to 5 V, or 0 to 10 VInput impedanceCurrent input: 150 Ω, Voltage input: 1 MΩ (Use a 1:1 connection when connecting the ES2-HB.)ControloutputE5CNSPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicableload: 5 V, 10 mAE5CN-USPDT, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable load:5 V, 10 mAE5CNE5CN-UOutput voltage: 12 VDC ±15% (PNP), max.
load current: 21 mA, with short-circuit protection circuitRelay outputVoltage outputCurrent output E5CN4 to 20 mA DC/0 to 20 mA DC, load: 600 Ω max., resolution: approx. 2,700Long-life relayoutputSPST-NO, 250 VAC, 3 A (resistive load), electrical life: 1,000,000 operations, load power supplyvoltage: 75 to 250 VAC (DC loads cannot be connected.), minimum applicable load: 5 V, 10 mA,leakage current: 5 mA max. (250 VAC, 60 Hz)Alarm outputEvent inputE5CNSPST-NO, 250 VAC, 1 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 1 V, 1 mAContact inputON: 1 kΩ max., OFF: 100 kΩ min.Non-contactinputON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.Outflow current: Approx. 7 mA per pointExternal power supply forES1B12 VDC ±10%, 20 mA, Short-circuit protection provided.Control methodON/OFF control or 2-PID control (with auto-tuning)Setting methodDigital setting using front panel keysIndication method11-segment digital display and individual indicators (7-segments displays also possible)Character height: PV: 11 mm, SV: 6.5 mmOther functionsManual output, heating/cooling control, transfer output (on some models), loop break alarm, multi SP, MVlimiter, input digital filter, self-tuning, temperature input shift, run/stop, protection functions, etc.Ambient operatingtemperature−10 to 55°C (with no icing or condensation), for 3-year warranty: −10 to 50°CAmbient operating humidity25% to 85%Storage temperature−25 to 65°C (with no icing or condensation)Digital Temperature ControllersE5CN/E5CN-U5■ Input RangesThermocouples/Platinum Resistance Thermometers (Multi-inputs)InputTypePlatinum resistancethermometerNamePt100ThermocoupleJPt100KJTELInfrared temperaturesensorUNRSB10 to70°C60 to120°C115 to165°C160 to260°CTemperature range (°C)Settingnumber1700130017001300850850850600500.0500.0500.0400.0400400.0400400.0260100.0100.0120165000019202122901000.0−200−199.9010.0−199.9230−20.0−100−20.0678−20045The applicable standards for the input typesare as follows:001617−100−200−199.99101112−200−199.9−200131415U: Cu-CuNi, DIN 43710-198518Pt100: IEC 751L: Fe-CuNi, DIN 43710-1985Models with Analog InputsInput TypeCurrentVoltageInput specification4 to 20mA 0 to 20 mA 1 to 5 VSetting rangeUsable in the following ranges by scaling:−1999 to 9999, −199.9 to 999.9, −19.99 to 99.99 or −1.999 to 9.999Setting number0120 to 5 V30 to 10 V4Digital Temperature Controllers E5CN/E5CN-U23Shaded settings are the default settings.K, J, T, E, N, R, S, B: IEC584-160 to 50 mVUsable inthe followingranges byscaling:−1999 to9999 or−199.9 to999.918001800170016001500140013001200110010009008007006005004003002001000−100.0−200.0AnaloginputShaded settings are the default settings.■ Alarm TypesSelect alarm types out of the 12 alarm types listed in the following table.Set valueAlarm typeAlarm output operationWhen X ispositive0Alarm functionOFF1Upper- and lower(See note 1.) limit23Upper limitLower limit4Upper- and lower(See note 1.) limit range5Upper- and lower(See note 1.) limit with standbysequenceOutput OFFLONOFFH(See note 2.)XSPXONOFFONOFFSPLONOFFONOFFHXCase 3 (Always ON)ONOFFHLower-limit withstandby sequenceONOFF8Absolute-valueupper-limitONOFF9Absolute-valuelower-limitONOFF10Absolute-valueupper-limit withstandby sequenceONOFFAbsolute-valuelower-limit withstandby sequenceONOFFH>0, L<0|H| > |L|HSPLH<0, L>0|H| ≥ |L|L SPSP HLCase 1(See note 3.)(See note 4.)Case 3 (Always ON)Case 2H<0, L<0LH SPH<0, L>0|H| < |L|SP LHHH>0, L<0|H| > |L|HSPLL SPSPXONOFFSP H LSPXSPX0X0X0X0ONOFFONOFFONOFFONOFFONOFFONOFFH>0, L<0|H| ≤ |L|3.