ZEN_V1 (Техническая документация)

Programmable RelayZENlFlexible Automation• Two standard CPU’s sizes; 10 I/O & 20 I/O• All CPU models are extendable with maximum 3 expansionunits.• ZEN 10 I/O expandable up to 34 I/O• ZEN 20 I/O expandable up to 44 I/O• Version C1 are with LCD display with 4 lines and 12 characters,8 programming / control buttons, Inputs / Power Supply, calendar & clock functionality.• Version C2 is an economic type with LED status• DC-models have 2 analogue inputs• Inputs/Power Supply: 24 VDC or 100-240VAC• Outputs: - Relays, 8A, 250 VAC- Transistors, 24 VDC, 500 mA• Programming software optionalModel Number Structure■ Model Number LegendCPU unitsZEN-@@C@@@@-V112 34561& 2.

CPU model102010 I/O model20 I/O model3. Type classifier12LCD display, buttons, calendar & clockLED indicationExpansions unitsZEN-@E@@1 231. Number of I/O842. Input typeAD4. Input typeADAC inputDC input5. Output typeRTRelay outputTransistor output4 inputs & 4 outputs4 points or 4 outputsAC inputDC inputNo input available3. Output typeRTRelay outputTransistor outputNo output available6. Supply voltageADAC power supplyDC power supplyProgrammable Relay ZEN1Ordering Information■ List of modelsNameCPU UnitsNo. ofI/Opoints10DisplaytypeLCDPower SupplyvoltageInputs100 to 240 VAC 6Outputs100 to 240 VAC 4RelaysLEDLCD24 VDC624 VDC4RelaysLEDLCD24 VDC624 VDC4TransistorsLED20LCD100 to 240 VAC 12100 to 240 VAC 8RelaysLEDLCD24 VDC1224 VDC8RelaysLEDLCD24 VDC1224 VDC8TransistorsLEDExpansionI/O Units84Buttons,calendar& clockAnaloginputModel numberYesNoZEN-10C1AR-A-V1NoNoZEN-10C2AR-A-V1YesYesZEN-10C1DR-D-V1NoYesZEN-10C2DR-D-V1YesYesZEN-10C1DT-D-V1NoYesZEN-10C2DT-D-V1YesNoZEN-20C1AR-A-V1NoNoZEN-20C2AR-A-V1YesYesZEN-20C1DR-D-V1NoYesZEN-20C2DR-D-V1YesYesZEN-20C1DT-D-V1NoYesZEN-20C2DT-D-V1-4100 to 240 VAC 4Relays--424 VDC4Relays-ZEN-8EARZEN-8EDR-424 VDC4Transistors-ZEN-8EDT-4100 to 240 VAC ---ZEN-4EA-424 VDC---ZEN-4ED---4Relays-ZEN-4ER■ AccessoriesNameMemory cassetteSpecificationsEEPROM (for datasecurity and copying)RemarksModel numberEnables programs and parameter settings to be saved or copied to another ZEN-ME01ZEN (See note.)LCD typeLED typeTransfer from ZEN toMemory CassetteSupportedNot SupportedTransfer from MemoryCassette to ZENSupportedSupported (Automatictransfer when powerturned ON)Memory CassetteinitializationSupportedNot SupportedConnecting cable2-m RS-232C (9-pinsub-D connector)-Battery Unit10 years min.

Batterylife (at 25° C)The program and parameter settings are backed up in the CPU Unit'sZEN-BAT01internal EEPROM and will not be lost. Use the Battery Unit to preventloss of calendar/clock, holding bits, holding timer present values, counterpresent values, and other data when the power is turned OFF for anextended time (for 2 days or more at 25° C). This data is otherwise backedup using RAM and a super-capacitor.ZEN Support Software Runs on Windows 95,98, 2000, ME, XP orNT 4.0.Specifically designed for the ZEN (CD-ROM).ZEN-CIF01ZEN-SOFT01-V3Note: Memory Cassettes created using the CPU Unit can be read to the CPU Unit, regardless of which model is used, however the following pointsmust be taken into consideration.1. When using a Memory Cassette created with a V1 CPU Unit for a Pre-V1 CPU Unit, use the Memory Cassette within the ranges for thePre-V1 CPU Unit's timers, holding timers, counters, weekly timers, calendar timers, and displays.2.

When using a Memory Cassette created with a CPU Unit with 20 I/O points for a CPU Unit with 10 I/O points, use only up to 6 inputs and4 outputs for the I/O bit area.2Programmable Relay ZENSystem ConfigurationCPU UnitExpansion I/O UnitNCBattery UnitAC100-200V100AR-A-V1Connecting Cable• Up to 3 Expansion I/O Units can beconnected, regardless of the I/Ospecifications or Unit type.• The Connecting Cable and MemoryCassette cannot be connected to theZEN at the same time.• Programs cannot be written to LED-typeCPU Units without the ZEN SupportSoftware or a Memory Cassette.Memory CassetteSupport Software■ Support Software and CPU Unit CombinationsSupport Software VersionPre-V1 UnitsV1 UnitsZEN-SOFT01 Ver.

1.00ZEN-SOFT01-V2 Ver. 2.00ZEN-SOFT01-V3 Ver. 3.00Can be used.Can be used.Can be used.10 I/O pointsCan be used, with restrictions(See note.)Can be used, with restrictions(See note.)Can be used.20 I/O pointsCannot be used.Cannot be used.Can be used.Note: Only half of each of the timer, holding timer, counter, weekly timer, calendar timer, and display function areas can be used(i.e., the Pre-V1 bit range).Programmable Relay ZEN3Specifications■ General SpecificationsItemSpecificationZEN-@0C@AR-A-V1ZEN-@0C@D@-D-V1Power supplyvoltage100 to 240 VAC24 VDCRated powersupply voltage85 to 264 VAC20.4 to 26.4 VDCPowerconsumption30 VA max. (With 3Expansion Unitsconnected)6.5 W max.

(With 3Expansion Unitsconnected)Inrush current40 A max.10 A max.InsulationresistanceBetween power supply AC external and input terminals, and relay output terminals:20 M_ min. (at 500 VDC)Dielectric strengthBetween power supply AC external andinput terminals, and relay output terminals: 2,300 VAC, 50/60 Hz for 1 minute with leakage current of1 mA max.Noise immunityConforms to IEC61000-4-4, 2 kV(power supply line)VibrationresistanceConforms to JIS C0040, 10 to 57 Hz, amplitude 0.075 mm, 57 to 1,500 Hz, acceleration:9.8 m/s2 80 minutes in X, Y, and Z directions (sweep time: 8 min (No.

sweeps: 10 = 80 min.))Shock resistanceConforms to JIS C0041. 147 m/s2, 3 times in X, Y, and Z directions.AmbienttemperatureLCD-type CPU Unit (operation panel andcalendar/clock function): 0 to 55°C LED-type CPU Unit (no operation panel or calendar/clock function):–25 to 55°CAmbient humidity10% to 90% (with no condensation)AmbientconditionsNo corrosive gasesAmbient storage temperatureLCD-type CPU Unit (operation panel andcalendar/clock function): –20 to 75°C LED-type CPU Unit (no operation panel or calendar/clock function): –40 to 75°C■ Performance SpecificationsItemSpecificationControl methodStored program controlI/O control methodCyclic scanProgramming languageLadder diagramProgram capacity96 lines (3 input conditions and 1 output per line)Max. No. of control I/O points44 points CPU Unit: 12 inputs and 8 outputs Expansion I/O Units: 4 inputs and 4 outputs each,up to 3 Units.LCD display12 characters x 4 lines, with backlight (LCD-type CPU Unit only)Operation keys8 (4 cursor keys and 4 operation keys) (LCD-type CPU Unit only)Memory backupInternal EEPROM (or optional Memory Cassette)• User programs• Parameter settingsInternal RAM, super-capacitor hold (or optional Battery Unit)• Holding bits• Holding timer and counter valuesSuper capacitor hold (or optional Battery Unit)• Calendar and clockSuper-capacitor holding time2 days min.

(25°C)Battery life (ZEN-BAT01)10 years min. (25°C)Time function (RTC)ZEN@0C1@@-@ only, accuracy: 1 to 2 min/month (at 25°C)Terminal blockSolid-line terminal block (Use solid lines or fine wiring terminals.)Power supply holding timeZEN-@0C@AR-A: 10 ms min.ZEN-@0C@D@-D: 2 ms min.Weight300 g max.4Programmable Relay ZEN■ Input SpecificationCPU UnitAC Inputs (Not Isolated)ItemSpecificationsInput voltage100 to 240 VAC +10%, –15%, 50/60 HzInput impedance680 kWInput current0.15 mA/100 VAC, 0.35 mA/240 VACON voltage80 VAC min.OFF voltage25 VAC max.ON response time50 ms or 70 ms at 100 VAC (See note.)100 ms or 120 ms at 240 VAC (See note.)OFF response timeCircuit drawingIN 330 kΩ330 kΩIN51 kΩ0.1 µFInternalcircuit100 to 240 VACNLNote: Can be selected using the input filter settingsDC Inputs I0 to I3 (I0 to I9 for Units with 20 I/O points), V1 Units (Photocoupler Isolated).ItemInput voltageSpecificationsCircuit drawing24 VDC +10%, –15%Input impedance5 kWInput current5 mA (typ.)ON voltage16.0 VDC min.INOFF voltage5.0 VDC max.ON response time15 ms or 50 ms (See note.)4.1 kΩ750 kΩIN24 VDCInternalcircuit2200PFCOMOFF response timeNote: Can be selected using the input filter settingsDC Inputs I14 and I15 (Ia and Ib for Units with 20 I/O points), V1 Units (Not Isolated)ItemDC inputsInput voltageSpecificationsCircuit drawing24 VDC +10%, –15%Input impedance5 kWInput current5 mA (typ.)ON voltage14.0 VDC min.OFF voltage4.5 VDC max.ON response time15 ms or 50 ms (See note.)27 kΩININ 4 kΩ150 kΩ0.01 F100 kΩInternalcircuit2.4 kΩCOM27 kΩ24 VDCAnalog inputsOFF response time27 kΩINInput range0 to 10 VExternal input impedance150 k_ min.Resolution0.1 V (1/100 FS)Overall accuracy (–25 to 55°C)10% FSAD conversion data0 to 10.5 V (in increments of 0.1 V)AnalogvoltageoutputdeviceIN4 kΩ0.01 F100 kΩCOMWhen connectinganalog I/Odevices, alwaysconnect thenegative (–) sideto the COMterminal.150 kΩ2.4 kΩInternalcircuit27 kΩNote: Can be selected using the input filter settings.Expansion I/O UnitAC Inputs (Photocoupler Isolated)ItemSpecificationsInput voltage100 to 240 VAC +10%, –15%, 50/60 HzInput impedance83 kWInput current1.2 mA/100 VAC, 2.9 mA/240 VACON voltage80 VAC min.OFF voltage25 VAC max.ON response time50 ms or 70 ms at 100 VAC (See note.)100 ms or 120 ms at 240 VAC (See note.)OFF response timeCircuit drawingININ100 to 240 VAC83 kΩ4.7 kΩInternalcircuitNote: Can be selected using the input filter settings.Programmable Relay ZEN5DC Inputs (Photocoupler Isolated)ItemSpecificationsInput voltage24 VDC +10%, –15%Input impedance4.7 kWCircuit drawingInput current5 mA (typ.)INON voltage16.0 VDC min.INOFF voltage5.0 VDC max.ON response time15 ms or 50 ms (See note.)4.7 kΩ750Ω2,200 pFInternalcircuit24 VDCCOMOFF response timeNote: Can be selected using the input filter settings.■ Output Specifications (CPU Unit/Expansion I/O Unit)Relay Output TypeItemSpecificationsCircuit drawingMaximum switching capacity250 VAC/8 A (Resistive load: cosf= 1)24 VDC/5 A (Resistive load)Minimum switching capacity5 VDC/10 mA (Resistive load)Relay lifeElectricalResistive load: 50,000 times (cosf= 1)Inductive load: 50,000 times (cosf= 0.4)Mechanical10 million timesON response time15 ms max.OFF response time5 ms max.Q0 to Q3/OUT0 to OUT3LQ4/Q6InternalcircuitLCOMUnits with 20 I/O points onlyLQ5/Q7Life-test Curve (usage: 360 times/hour)Life (X 103)The life, under the worst conditions, of the outputcontacts used in ZEN relay outputs is given in theabove table.