CX-Programmer User Manual (Техническая документация)

CX-ProgrammerUser ManualVersion 2.0OMRONCX-Programmer – User ManualNoticeOMRON products are manufactured for use according to proper procedures by a qualified operator and onlyfor the purposes described in this manual.The following conventions are used to indicate and classify precautions in this manual. Always heed theinformation provided in them. Failure to heed precautions can result in injury to people or damage to theproduct.DANGER!Indicates information that, if not heeded, is likely to result in loss of life orserious injury.WARNINGIndicates information that, if not heeded, could possibly result in loss of life orserious injury.CautionIndicates information that, if not heeded, could result in relatively serious orminor injury, damage to the product, or faulty operation.OMRON Product ReferencesAll OMRON products are capitalised in this manual.

The word “Unit” is also capitalised when it refers toan OMRON product, regardless of whether or not it appears in the proper name of the product.The abbreviation “PLC” means Programmable Logic Controller and is not used as an abbreviation foranything else.Revision 2.0Page (i)OMRONCX-Programmer – User ManualVisual AidsThe following headings appear in the left column of the manual to help you locate different types ofinformation.Indicates information of particular interest for efficient and convenient operation of the product.1, 2, 3…Indicates lists of one sort or another, such as procedures, checklists etc.Represents a shortcut on the Toolbar to one of the options available on the menu ofthe same window. OMRON, 2000All rights reserved.

No part of this publication may be reproduced, stored in a retrieval system, ortransmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise,without the prior written permission of OMRON.All copyright and trademarks acknowledged.No patent liability is assumed with respect to the use of the information contained herein. Moreover,because OMRON is constantly striving to improve its high-quality products, the information contained inthis manual is subject to change without notice. Every precaution has been taken in the preparation of thismanual. Nevertheless, OMRON assumes no responsibility for errors or omissions.

Neither is any liabilityassumed for damages resulting from the use of the information contained in this publication.Revision 2.0Page (ii)OMRONCX-Programmer – User ManualAbout this ManualThis manual describes the CX-Programmer application and its ability to create and maintain programs foruse with OMRON SYSMAC CS, CV and C PLCs. It does not provide detailed information concerning thePLCs themselves, for this information the commercial manual for the device must be consulted.This manual contains the following chapters:•Chapter 1 Introduction. This chapter describes the CX-Programmer software in general terms andalso provides details of the operating environment and minimum configuration necessary for thesatisfactory operation of CX-Programmer.•Chapter 2 Quick Start Guide.

This chapter describes the basic features of CX-Programmer togetherwith a simple tutorial for fimiliarisation purposes.•Chapter 3 Project Referernce. This describes the features common to two or more parts of CXProgrammer.•Chapter 4 Reference. This chapter introduces the features contained in the Project workspace anddiscusses their associated commands and features.•Chapter 5 Advanced Topics.

This chapter discusses the more advanced topics in relation to CXProgrammer.•Appendix A Toolbars and Keyboard Shortcuts. This appendix summerises the toolbar and keyboardshortcuts available from CX-Programmer.A Glossary of Terms and Index are also provided.Warning:Revision 2.0Failure to read and understand the information provided in this manualmay result in personal injury or death, damage to the product, orproduct failure. Please read each chapter in its entirety and be sureyou understand the information provided in the chapter and relatedchapters before attempting any of the procedures or operations given.Page (iii)OMRONCX-Programmer – User ManualTable of ContentsCX-Programmer – User ManualPageChapter 1 - Technical Specification ................................................... 1OMRON CX-Programmer..........................................................................................................

1About this Manual....................................................................................................................... 1CX-Programmer Features ........................................................................................................... 2System Requirements.................................................................................................................. 4Installation .................................................................................................................................. 5Help and How to Access it..........................................................................................................

5Technical Support ....................................................................................................................... 8Chapter 2 - Quick Start Guide ......................................................... 11Starting CX-Programmer .......................................................................................................... 11Junior and Full Functionality – Licensing ................................................................................ 12Introducing CX-Programmer Projects ......................................................................................

12The CX-Programmer Environment........................................................................................... 12Using CX-Programmer ............................................................................................................. 20Summary...................................................................................................................................

31Chapter 3 - Project Reference .......................................................... 33Project Workspace .................................................................................................................... 33Program Sections ...................................................................................................................... 34Cross-Reference Report ............................................................................................................ 36Address Reference Tool............................................................................................................ 37Output Window......................................................................................................................... 39Watch Window .........................................................................................................................

39Options and Preferences ........................................................................................................... 40Finding and Replacing Text...................................................................................................... 46Properties .................................................................................................................................. 50Using Microsoft Windows Features in CX-Programmer..........................................................

52Chapter 4 - Reference........................................................................ 63PLCs and Projects..................................................................................................................... 63Symbols .................................................................................................................................... 64Program Editing ........................................................................................................................ 69Mnemonics Program Editing .................................................................................................... 79Working On-Line...................................................................................................................... 80Data Trace/Time Chart Monitoring ..........................................................................................

90CX-Net Network Configuration Tool ....................................................................................... 90IO Table .................................................................................................................................... 90Revision 2.0Page (iv)OMRONTable of Contents continuedCX-Programmer – User ManualPageChapter 5 - Advanced Topics ...........................................................

91Writing More Maintainable Programs ...................................................................................... 91Copying Information between Projects..................................................................................... 92Using CX-Programmer with Other Applications...................................................................... 92Converting Programs to PLC Types ......................................................................................... 95Applying a Password to the PLC Program ............................................................................... 96Appendix A - Toolbar and Keyboard Shortcuts ............................ 99Standard Toolbar.......................................................................................................................