Exploiting renewable energy sources (794281)

Просмтор этого файла доступен только зарегистрированным пользователям. Но у нас супер быстрая регистрация: достаточно только электронной почты!

Текст из файла

Exploiting renewable energy sources.

Growing concern over the world's ever-increasing energy needs and the prospect of rapidly dwindling reserves of oil, natural gas, and uranium fuel have prompted efforts to develop viable alternative energy sources. The volatility and uncertainty of the petroleum fuel supply were dramatically brought to the fore during the energy crisis of the 1970s caused by the abrupt curtailment of oil shipments from the Middle East to many of the highly industrialized nations of the world. It also has been recognized that the heavy reliance on fossil fuels has had an adverse impact on the environment. Gasoline engines and steam-turbine power plants that burn coal or natural gas emit substantial amounts of sulfur dioxide and nitrogen oxides into the atmosphere. When these gases combine with atmospheric water vapour, they form sulfuric acid and nitric acids, giving rise to highly acidic precipitation. The combustion of fossil fuels also releases carbon dioxide. The amount of this gas in the atmosphere has steadily risen since the mid-1800s largely as a result of the growing consumption of coal, oil, and natural gas. More and more scientists believe that the atmospheric buildup of carbon dioxide (along with that of other industrial gases such as methane and chlorofluorocarbons) may induce a greenhouse effect, raising the surface temperature of the Earth by increasing the amount of heat trapped in the lower atmosphere. This condition could bring about climatic changes with serious repercussions for natural and agricultural ecosystems. (For a detailed discussion of acid rain and the greenhouse effect, see the articles ATMOSPHERE: Effects of human activity on atmospheric composition and their ramifications and HYDROSPHERE. THE: Acid rain and Buildup of greenhouse gases.} (see also Index: renewable resource) Many countries have initiated programs to develop renewable energy technologies that would enable them to reduce fossil-fuel consumption and its attendant problems. Fusion devices are believed to be the best long-term option, since their primary energy source would be the hydrogen isotope deuterium abundantly present in ordinary water. Other technologies that are being actively pursued are those designed to make wider and more efficient use of the energy in sunlight, wind, moving water, and terrestrial heat (i.e., geothermal energy). The amount of energy in such renewable and virtually pollution-free sources is large in relation to world energy needs, yet at the present time only a small portion of it can be converted to electric power at reasonable cost. A variety of devices and systems have been created to better tap the energy in sunlight. Among the most efficient are photovoltaic systems that transform radiant energy from the Sun directly into electricity by means of silicon or gallium arsenide solar cells. Large arrays consisting of thousands of these semiconductor cells can function as central power stations (see Solar cells below). Other systems, which are still under development, are designed to concentrate solar radiation not only to generate electric power but also to produce high-temperature process heat for various applications. These systems employ a number of different components, including large parabolic concentrators and heat engines of the Stirling engine type (see above). Another approach involves the use of flat-plate solar collectors to provide space heating for commercial and residential buildings, (see also Index:

solar energy)

Although wind is intermittent and diffuse, it contains tremendous amounts of energy. Sophisticated wind turbines have been developed to convert this energy to electric power. The utilization of wind energy systems grew discemibly during the 1980s. For example, more than 15,000 wind turbines are now in operation in Hawaii and California at specially selected sites. Their combined power rating of 1,500 megawatts is roughly equal to that of a conventional steam-turbine power installation (see Wind turbines below).

Converting the energy in moving water to electricity has been a long-standing technology. Yet, hydroelectric power plants are estimated to provide only about 2 percent of the world's energy requirements. The technology involved is simple enough: hydraulic turbines change the energy of fast-flowing or falling water into mechanical energy that drives power generators, which produce electricity (see Water turbines below). Hydroelectric power plants, however, generally require the building of costly dams. Another factor that limits any significant increase in hydroelectric power production is the scarcity of suitable sites for additional installations except in certain regions of the world. In certain coastal areas of the world, as, for example, the Ranee River estuary in Brittany, Fr., hydraulic turbine-generator units have been used to harness the great amount of energy in ocean tides (see Tidal plants below). At most such sites, the capital costs of constructing damlike structures with which to trap and store water are prohibitive, however. Geothermal energy flows from the hot interior of the Earth to the surface in steam or hot water most often in areas of active volcanism. Geothermal reservoirs with temperatures of 180 С or higher are suitable for power generation. The earliest commercial geothermal power plant was built in 1904 in Larderello, Italy. Today, steam from wells drilled to depths of hundreds of metres drives the plant's turbine generators to produce about 190 megawatts of electricity. Geothermal plants have been built in a number of other countries, including El Salvador, Japan, Mexico, New Zealand, and the United States. The principal U.S. plant, located at The Geysers north of San Francisco, can generate up to 1,900 megawatts, though production may be restricted to prolong the life of the steam field. (C.R.R/Ed.) Copyright 1994-1998 Encyclopedia Britannica.

Характеристики

Тип файла документ

Документы такого типа открываются такими программами, как Microsoft Office Word на компьютерах Windows, Apple Pages на компьютерах Mac, Open Office - бесплатная альтернатива на различных платформах, в том числе Linux. Наиболее простым и современным решением будут Google документы, так как открываются онлайн без скачивания прямо в браузере на любой платформе. Существуют российские качественные аналоги, например от Яндекса.

Будьте внимательны на мобильных устройствах, так как там используются упрощённый функционал даже в официальном приложении от Microsoft, поэтому для просмотра скачивайте PDF-версию. А если нужно редактировать файл, то используйте оригинальный файл.

Файлы такого типа обычно разбиты на страницы, а текст может быть форматированным (жирный, курсив, выбор шрифта, таблицы и т.п.), а также в него можно добавлять изображения. Формат идеально подходит для рефератов, докладов и РПЗ курсовых проектов, которые необходимо распечатать. Кстати перед печатью также сохраняйте файл в PDF, так как принтер может начудить со шрифтами.

Список файлов учебной работы