Рук_п_Имп-4 (1031891), страница 5
Текст из файла (страница 5)
It had integrated and collected this information.ModuleNameSpecificationADAM-50133-ch. RTD inputIsolatedADAM-50178-ch. AIIsolatedADAM-5017H8-ch. High speed AIIsolatedADAM-50187-ch. Thermocouple inputIsolatedADAM-50244-ch. AOIsolatedADAM-50507-ch. D I/ONon-isolatedADAM-505116-ch. DINon-isolatedADAM-5051D16-ch. DI w/LEDNon-isolatedADAM-5051S16-ch. Isolated DI w/LEDIsolatedADAM-50528-ch. DIIsolatedADAM-5055S16-ch. Isolated DI/O w/LEDIsolatedADAM-505616-ch. DONon-isolatedADAM-5056D16-ch.
DO w/LEDNon-isolatedADAM-5056S16-ch. Isolated DO w/LEDIsolatedADAM-5056SO16-ch. Iso. DO w/LED (source)IsolatedADAM-50606-ch. Relay outputIsolatedADAM-50688-ch. Relay outputIsolatedADAM-50698-ch. Relay outputIsolatedCounter/FrequencyADAM-50804-ch. Counter/FrequencyIsolatedSerial I/OADAM-50904-port RS232Non-isolatedAnalog I/ODigital I/ORelay OutputReferenceTable 4-1: I/O Module Support ListADAM-50004- 25Software UtilitiesSoftware UtilitiesThere is a software utilities available to the ADAM-5000 systems.
TheWindows utility software helps you to configure your ADAM-5000. ADLL (Dynamic Link Library) driver is provided to write Windowsapplications, and a DDE (Dynamic Data Exchange) server is a servicethat links the ADAM-5000 systems to popular Windows packagessuch as Intouch, FIX DMACS, ONSPEC, Genesis and Excel.5.1ADAM-4000 and ADAM-5000 Windows UtilityThe ADAM-4000 and 5000 Windows Utility offers a graphical interfacethat helps you configure the ADAM-4000 and ADAM-5000 DA&CModules.
This windows utility makes it very convenient to monitoryour Data Acquisition and Control system. The following guidelineswill give you some brief instructions on how to use the utility.•Overview• COM port settings•Search connected modules• Terminal emulationl•Data Scope• Save module’s configuration to file•Load module’s configuration file to configure module•Module configuration•Module calibration•Data input and output• Alarm settings• Download procedure5-2ADAM-5000Chapter 55.1.1OverviewMain MenuThe window utility consists of a toolbar on the top and a display areathat shows forth the relevant information about the connectedmodules.
The utility’s main toolbar is as shown below:The main toolbar buttons are shortcuts to some commonly used menuitems:Save: Saves the connected module to PC.Save the information of all connected modules to .txt file .By doingthis, users can keep track of every different setting environment.Search: Search for the address of connected modules onnetwork.Terminal: Issue commands and receives response.Data Scope: Display the current data.Save Configuration: Saves the configuration of selectedmodule into txt file.Load Configuration: Download the previous configuration fileHelp: Display the Online Help for the ADAM utility.5.1.2Save FunctionSave the settings of current module (e.g.
Baud rate, Address, ModulesName) to txt file.ADAM-50005-3Software UtilitiesExample:Figure 5-1 Display the connected moduleFigure 5-2 Save the information of connected modules to txt file5.1.3COM Port SettingsFigure 5-3 Setup options5-4ADAM-5000Chapter 5Baud rate:The communication speed (baud rate) can be configured from 1200 bpsto 115.2 Kbps.Prefix Char:The Prefix Char is added to each ADAM command as follows:[Prefix Char] + [ ADAM Command]Note:This is a special command only for ADAM-4521,ADAM-4541 and ADAM-4550.Timeout:Timeout means the time limit for waiting a response after the systemhas issued a command. If no response has been received when timeouthas passed, we’ll see the “Timeout !” message on the screen.5.1.4Search Connected modulesWhen you use the Search command, it will search for any connectedmodules on network and display their data.
There are three ways tosearch for:1. Click the Toolbar button:ADAM-50005-5Software Utilities2. Click the right mouse button:3. Click the Tools menu and choose the Search command:4. The connected modules on network is currently being searched:5-6ADAM-5000Chapter 55.1.5Terminal EmulationYou can issue commands and receive response by clicking theTerminal button. There are two ways to issue commands:1.
Issue single command:Enable orDisable2. Batch commandUsers can compose a sequence of commands and save them into a .txtfile. Just click the Browse button to list all the .txt files available andselect the file for continuous execution of the batch of commandstherein.3.Back to the main menu.Note:ADAM-5000If you select the checksum function on previousmain menu, you have to select the checksumfunction in this menu.5-7Software UtilitiesEnable orDisableFigure 5-4 Checksum function enabled5.1.6Data ScopeData Scope enables you to monitor the issue of commands and theresponses on another connected PC within your system.
The following example illustrates the working connection for the Data Scopefunction:Figure 5-5 The connection for the Data Scope function5-8ADAM-5000Chapter 5When you issue commands from PC#1, you will get response.: Send single command or batch command .: Send a single command or batch command repeatedly.: Stop issuing commands.: Save history of the terminal emulation to txt file.On PC#3, you can observe all commands issued from PC#1. Meanwhile, you can also observe all responses received at PC#2.Addressof selectedmodulesFigure 5-6 Monitor the issuing commands from PC#1ADAM-50005-9Software UtilitiesWhen your system is connected with multiple ADAM-4000 orADAM-5000 modules, just click the addresses of the modules to seerelevant information (multiple selection from 00 to FF is allowed).
Thencheck the Filter option and click Update button to see relevantinformation of the modules. Note that the information about otherunselected modules won’t show forth.5.1.7•Saving a Modules Configuration to FileSave the input range, baud rate, data format, checksum status and/or integration time and Alarm Status for a specified analog inputmodule.• Save the output range, baud rate, data format, checksum status andslew rate for a specified analog output module.•Save the baud rate and checksum status for a digital I/O module.• Save the input mode, baud rate, checksum status and/or frequencygate time, input signal mode, gate mode, alarm status, etc.
for aspecified counter/frequency module.There are three ways to save a configuration file:1. Click the Toolbar button2. Click the right mouse button5-10ADAM-5000Chapter 53. Click the Tools menu. Choose the “Save Configuration file”commandand then specify the file name.The configuration file is now saved.ADAM-50005-11Software Utilities5.1.8•Load Modules Configuration FileReload previous settings. Sets the input range, baud rate, dataformat, checksum status and/or integration time and alarm statusfor a specified analog input module.• Sets the output range, baud rate, data format, checksum status andslew rate for a specified analog output module.• Sets the baud rate and checksum status for a digital I/O module.• Sets the input mode, baud rate, checksum status and/or frequencygate time, input signal mode, gate mode, alarm status, etc.
for aspecified counter/frequency module.Note:Baud rate and checksum can only be changed in theINIT* state. Changed settings can only take effectafter a module is rebooted.There are three ways to load a configuration file:1. Click the Toolbar button:2. Click the right mouse button:5-12ADAM-5000Chapter 53. Click the Tools menu and choose Download configuration file toset the environment command:4. Choose the file name:The configuration file is now loaded.ADAM-50005-13Software Utilities5.1.9•Module ConfigurationSets the input range, baud rate, data format, checksum status, and/or integration time for a specified analog input module.• Sets the output range, baud rate, data format, checksum status andslew rate for a specified analog output module.•Sets the baud rate and checksum status for a digital I/O module.• Sets the input mode, baud rate, checksum status and/or frequencygate time for a specified counter/frequency module.Note:Baud rate and Checksum can only be changed in theINIT* state.
Changed settings only take effect after amodule is rebooted.For Example: The configuration of ADAM-40115-14ADAM-5000Chapter 5• Address: Represents the address of the module. The Range is from0 to 255.• Baudrate: Represents the baud rate.• Checksum: Represents the checksum status, i.e., Disabled/Enabled.•Firmware Ver: Represents the version of firmware.•Input range: Represents the input range of modules. You can referto Chapter 4.•Data format: Represents the data format (e.g.
engineering format).You can refer to Chapter 4.5.1.10 Module CalibrationCalibration is to adjust the accuracy of ADAM module. There areseveral modes for module’s calibration: Zero calibration and spancalibration. Only analog input and output modules can be calibrated.Note: The calibrating function supports ADAM-5013/5017/5017H/5018/5024.Zero Calibration:(1). Apply power to the module and let it warm up for about 30minutes.(2). Make sure that the module is correctly installed and is properlyconfigured for the input range you want to calibrate.(3).
Use a precision voltage source to apply a calibration voltage to themodules’ terminals of the specific channel.(4). Click the “Zero Calibration” button. See Figure 5-7ADAM-50005-15Software UtilitiesFigure 5-7: Zero Calibration(5). Click the Execute button to begin the calibrationFigure 5-8: Execute Zero CalibrationSpan Calibration:(1). Use a precision voltage source to apply a calibration voltage to themodules’ terminals of the specific channel.(2). Click the “Span Calibration” button.
See Figure 5-9Figure 5-9: Span Calibration5-16ADAM-5000Chapter 5(3). Click the Execute button to begin the calibrationFigure 5-10: Execute Span CalibrationCJC Calibration:CJC (cold junction sensor) calibration only applies to the ADAM-5018(1). Prepare a voltage source which is accurate to the mV level.(2). Run the zero calibration and span calibration function.(3). Use a temperature emulation device (such as Micro-10) to send atemperature signal to the ADAM module and then compare this signalwith the reading from the ADAM module. If the reading value isdifferent from the signal, adjust the CJC value to improve it.(4).
Click the “CJC Calibration” button. See Figure 5-11.Figure 5-11: CJC CalibrationADAM-50005-17Software Utilities(5). Click the Execute button to begin the calibrationFigure 5-12: Execute CJC CalibrationAnalog Input Resistance Calibration:RTD sensor calibration only applies to the ADAM-5013Figure 5-13: RTD Module CalibrationAnalog Output Calibration:4~20 mA: ADAM 5024Figure 5-14: Analog Output Calibration5-18ADAM-5000Chapter 55.1.11 Data Input and OutputAnalog Input Module with Digital Output• The function can only be used when the alarm status is “Disable”.Digital Output Module•Click the item to turn it on or off.Analog Output ModuleADAM-50005-19Software UtilitiesEnter a value that users want to get•• Fast Decreasedecreaseincrease• fast increase5-20ADAM-5000Chapter 55.1.12 Alarm Settings• Set the alarm status, high alarm value, low alarm value, and thenclick the Update button.• Alarm setting: Disables or enables the alarm either in Latching orMomentary mode.• High alarm value: Downloads the high alarm limit value into themodule.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
