Рук_AdamView (1031878)
Текст из файла
User’s Quick Start GuideAdvantechADAMView1st EditioniContentsTable of ContentsCopyrightNoticeTrademarksTechnical SupportPART I: Getting Started1 Introduction1 Introduction ......................................................................................21.1 ADAMView Overview .................................................................... 21.2 ADAMView System Architecture .................................................31.3 ADAMView Component Description .......................................... 52 Preparing to Install ADAMView2.1 System Requirements .............................................................. 202.2 Installation and Configuration ................................................. 212.3 ADAMView Program Group Icons.............................................28iiiCopyrightCopyright 1993-1995 American Advantech CorporationAll Rights Reserved.Published by AMERICAN ADVANTECH Corporation. This manual contains proprietary informationwhich is protected by copyright.
No part of this manual may be reproduced, translated into any language or computer language, transcribed, transmitted in any form whatsoever, without prior writtenconsent of the publisher. For additional information contact:AMERICAN ADVANTECH CORP.750 East Arques AvenueSunnyvale, CA 94086(408) 245-6678FAX (408) 245-5678Notice:American Advantech Corporation does not warrant that the ADAMView software package willfunction properly in every hardware/software environment. American Advantech Corporation makes norepresentation or warranties of any kind whatsoever with respect to the contents of this manual andspecifically disclaims any implied warranties or fitness for any particular purpose. American AdvantechCorporation shall not be held liable for errors in this manual or for incidental or consequential damagesin connection with the use of this manual or its contents.
American Advantech Corporation reserves theright to revise this manual at any time without prior notice.TrademarksADAMView is a trademark of AMERICAN ADVANTECH CORPORATION.All other brand and product names are trademarks of their respective owners.viiiTechnical SupportAMERICAN ADVANTECH provides telephone support to registered users of ADAMView.If you purchased your ADAMView package from a dealer or your hardware interface vendor, the dealer orvendor may have special arrangements for providing you with technical support.If you encounter a problem while using ADAMView, first consult the on-line help and this manual. If youare unable to resolve the problem, or if you have questions specific to your application, don’t hesitate toFAX or call for technical support.
You can also look for Q&A at http://www.advantech.com.twUSA:American Advantech Corporation750 East Arques AvenueSunnyvale, CA 94086(408) 245-6678FAX (408) 245-5678E-mail: IAInfo@www.advantech.comASIA:Advantech CO., LTD.Fl. 4, No. 108-3, Ming-Chuan Rd.Shing-Tien City, Taipei, Taiwan, R.O.C.TEL: (886-2) 2218-4567FAX: (886-2) 2218-1989E-mail: iasupport@acl.advantech.com.twEUROPE:Advantech GermanyKarlsruherstr. 11/1D-70771 Leinf.-EchterdingenGermanyTEL: +49(0) 711 797 333 60FAX: +49(0) 711 797 333 85Advantech ItalyVia Don Verderio,4/B-20060 Cassina de,Pecchi (MI), Italy.TEL: 39-2-95343054FAX: 39-2-95343067ixMAINLAND CHINA:Beijing office:No. 7, 6th street, Shang Di Zone,Haidian District, 100085 Beijing,ChinaTEL: 86-10-62984345~47, 62986314~17FAX: 86-1-62984341~42Shanghai office:Rm#701, 7 F., Hua-Fu Building A,585 Long Hua W.
Rd.200232 Shanghai, ChinaTEL: 86-21-64696831, 64697910FAX: 86-21-64696834x1Getting Started1 Introduction1.1 ADAMView OverviewCongratulations on your purchase of ADVANTECH’S application builder for data acquisition andcontrol — ADAMView.ADAMView is a comprehensive application development tool for data acquisition and control. It supportsfunctions and utilities to develop automation applications for use in Windows 95/98 and Windows NTWindows 2000/XP environments. ADAMView provides an icon-based, mouse driven system for designingreal-time Autoimation and Control Strategies, System Monitor Displays, and Dynamic Operator Displays.The magic of ADAMView lies in its ability to provide advanced programming features and tools whilemaintaining ease of use.
A library of Icon Blocks representing data acquisition and control, mathematical and control functions is provided through Task Designer. You simply arrange Icon blocks intoa strategy, connect them, and then draw your dynamic display or configure your daily report. DisplayDesigner provides a variety of graphic objects to design monitoring and control displays.
ReportDesigner features a configurable format design utility and scheduler to generate reports automatically.In addition to the features listed above, ADAMView’s built-in VBA compatible programming toolsstrengthen its ability to perform complex calculation or analysis.The ADAMView package consists of two major software modules and several utility programs. The twomajor executables are ADAMView Strategy Editor/Runner (“ADAMView.exe”), and ADAMView Runtimeonly program (“ADAMViewRun.exe”). ADAMView.exe is for designing and testing Strategies.ADAMViewRun.exe is for running strategies in a live environment.
ADAMViewRun.exe uses fewerresources and achieves better runtime performance because it does not perform validity checks onobjects and links between objects. It does not allow any changes to be made to the strategy being run.21.2 ADAMView System ArchitectureA major improvement over Version 4.xx is the change in system architecture. We design ADAMView4.x with a modular-oriented, open integrated architecture. The open platform allows you to easilyintegrate ADAMView with other applications to share real-time control data. The performance andnumber of I/O blocks ADAMView can support are increased significantly through this newarchitecture.
The new architecture is outlined in figure 1-1.ADAMView EngineFigure 1-1 ADAMView 4.25 system architectureModule DescriptionData CenterThe central repository for data acquisition and control data. It manages all ADAMView real-time dataand provides three set of interfaces to the outside world; DDE & OLE Automation and C API.Through these three interfaces, other applications can retrieve or input data to ADAMView.I/O DriverResponsible for accessing real-time data from hardware equipment.
ADAMView I/O drivers cover allAdvantech industrial automation ADAM Series hardware, including ADAM-4000 remote modulesand ADAM-5000 distributed modules.Task DesignerResponsible for designing the application system. ADAMView provides many standard dataacquisition and control function blocks. Users just drag and drop function blocks to design a systemwithout any programming. ADAMView 4.x allows you to design and execute multiple taskssimultaneously. That is, you can divide a complex system into several independent tasks andexecute them at the same time.Display DesignerResponsible for creating a dynamic display for industrial automation.
Display Designer featuresmany common graphic objects to simplify building a display. In addition, ADAMView provides severaldrawing tools to create custom displays.3Report DesignerResponsible for designing and generating operation reports. Users can design the report format usinga tabular form tool and define a schedule to print the report automatically. Report Designer willperiodically collect the real-time data and combine the data with data format to generate report at thescheduled time.Script DesignerResponsible for controlling tasks and calculating and analyzing real-time data. ADAMView provides aVBA compatible development environment for script programming.The design work in ADAMView is saved as a strategy file.
A strategy file (with extension .GNI) is a binaryfile that stores all information about an editing session. A strategy is defined as one or more “tasks”together with one or more “displays” and one or no “main script”. “Task”, “Display”, and “Main Script”are the three primary elements used to design strategies. A simple strategy has one task with onedisplay and no main script, because a strategy can not function without at least one Task in it. Taskare essential to have a strategy.
Because the most important job of a task is to provide timing for“scanning”, so “Scan Task” is used interchangeably with “Task” throughout this manual.A task is a collection of icon blocks. A display is a collection of display items. Icon blocks and displayitems are the building blocks of strategy. You can see them as similar objects, except that displayitems have a graphic representation (provide some kind of GUI) when running while icon blocks donot.
They are connected to each other by connection wires or invisible links. The connections between icon blocks are visible in the task designer window. The links are referred to as “wires” because of their appearance. The connection between an icon block and a display item, or one displayitem and another, is not visible.
Hence, these are referred to as “Links”.Each task and display has its own properties. When first created, default properties are assigned tothe new task or new display. Users can change properties according to their needs. A task hasproperties such as scan period, sample rate, starting method and stopping method. A display hasproperties such as display name, visibility, etc.ADAMView features four different editors: Task Designer, Display Designer, Report Designer and ScriptDesigner. They are used to edit Tasks, Displays, Reports and Main Script respectively.
Характеристики
Тип файла PDF
PDF-формат наиболее широко используется для просмотра любого типа файлов на любом устройстве. В него можно сохранить документ, таблицы, презентацию, текст, чертежи, вычисления, графики и всё остальное, что можно показать на экране любого устройства. Именно его лучше всего использовать для печати.
Например, если Вам нужно распечатать чертёж из автокада, Вы сохраните чертёж на флешку, но будет ли автокад в пункте печати? А если будет, то нужная версия с нужными библиотеками? Именно для этого и нужен формат PDF - в нём точно будет показано верно вне зависимости от того, в какой программе создали PDF-файл и есть ли нужная программа для его просмотра.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
