Диссертация (Повышение абразивной стойкости лопаточного аппарата первых ступеней цилиндров высокого и среднего давления мощных паровых турбин), страница 19
Описание файла
Файл "Диссертация" внутри архива находится в папке "Повышение абразивной стойкости лопаточного аппарата первых ступеней цилиндров высокого и среднего давления мощных паровых турбин". PDF-файл из архива "Повышение абразивной стойкости лопаточного аппарата первых ступеней цилиндров высокого и среднего давления мощных паровых турбин", который расположен в категории "". Всё это находится в предмете "технические науки" из Аспирантура и докторантура, которые можно найти в файловом архиве НИУ «МЭИ» . Не смотря на прямую связь этого архива с НИУ «МЭИ» , его также можно найти и в других разделах. , а ещё этот архив представляет собой кандидатскую диссертацию, поэтому ещё представлен в разделе всех диссертаций на соискание учёной степени кандидата технических наук.
Просмотр PDF-файла онлайн
Текст 19 страницы из PDF
Erosion of Ductile and Brittle Materials / Aquaro D., Fontani E.// Meccanica. – 2001. - No 36. - pp. 651–661.45.Arjula, S. Solid-particle erosion behavior of high-performance thermoplasticpolymers / Arjula S., Harsha A.P., Ghosh M.K. // Journal of Materials Science. –2008. – No 43. - pp. 1757–1768.46.Ashrafizadeh, H. A numerical 3D simulation for prediction of wear causedby solid particle impact / Ashrafizadeh H., Ashrafizadeh F.
// Wear. – 2012. – No276 – 277. - pp. 75– 84.47.ASTM G76 Standard test method for conducting erosion tests by solidparticle impingement using gas jets.48.Bose, S. Thermal Barrier Coating Experience in Gas Turbine Engines atPratt & Whitney / Bose S., DeMasi-Marcin J. // Journal of Thermal SprayTechnology. – 1997. – No 6.
– pp. 99-104.49.Bressan, J.D. Abrasive wear behavior of high speed steel and hard metalcoated with TiAlN and TiCN / Bressan J.D., Hesse R., Silva Jr E.M. // Wear. –2001. – No 250. - pp. 561–568.50.Campos-Amezcua, A. Numerical study of erosion due to solid particles insteam turbine blades / Campos-Amezcua A., Mazur Z., Gallegos-Munoz A.,Romero-Colmenero A., Riesco-Aґvila J.M., Medina-Flore J.M. // Numerical HeatTransfer Part A. – 2008.
– No 53. - pp. 667–684.51.Chen, D. Computational Mean Particle Erosion Model / Chen D., SarumiM., Al-Hassani S.T.S. // Wear. – 1998. - No. 214. - pp. 64–73.52.Chen, Q. Computer simulation of solid-particle erosion of compositematerials / Chen Q., Li D.Y. // Wear. – 2003. – No 255. - pp. 78–84.53.Choi, G. S. Process Analysis and Monitoring in Abrasive Water JetMachining of Alumina Ceramics / Choi G. S., Choi G. H. // Int. J. Mach. ToolsManufacture. – 1997.
- No. 37. - pp. 295–307.54.Cofer, J.I. Advances in Steam Path Technology GER-3713E / Cofer J.I.,Reinker J.K., Sumner W.J. // GE Power Generation.17355.Dai, L. Nozzle passage aerodynamic design to reduce solid particle erosionof a supercritical steam turbine control stage / Dai L., Yu M., Dai Y. // Wear. –2007. - No 262. - pp.
104–111.56.Das, S.K. Analytical model for erosion behaviour of impacted fly-ashparticles on coal-fired boiler components / Das S.K., Godiwalla K.M., MehrotraS.P., Sastry K.K.M., Dey P.K. // Sadhana. – 2006. - No 31. - pp. 583–595.57.Desale, G.R. Effect of erodent properties on erosion wear of ductile typematerials / Desale G.R., Gandhi B.K., Jain S.C. // Wear. – 2006. - No 261. pp. 914–921.58.Dukowicz, J.
K. A particle-fluid numerical model for liquid sprays /Dukowicz J. K. // J. Computational Physics. – 1980. - No 35. - pp. 229–253.59.Finnie, J. Erosion of Surfaces by Solid Particles / Finnie J. // Wear. – 1960. -No 3. - pp. 87–103.60.Gahr, K.-H. Z. Wear by hard particles / Gahr K.-H.Z. // TribologyInternational. – 1998. - No 31. - pp. 587–596.61.Gnanavelu, A.
An integrated methodology for predicting material wear ratesdue to erosion / Gnanavelu A., Kapur N., Neville A., Flores J.F. // Wear. – 2009. –No. 267. - pp. 1935–1944.62.Hamed, .A. Turbine blade surface deterioration by erosion / Hamed A.A.,Tabakoff W., Das K., Rivir R.B., Arora P.
// J. Turbomach. – 2004. – No 127. –pp. 445-452.63.Hamed, A. Erosion and Deposition in Turbomachinery / Hamed A.,Tabakoff W., Wenglarz R. // Journal of Propulsion and Power. –2006. -No. 22. pp. 350 – 360.64.Harsha, A.P. Solid particle erosion behaviour of ferrous and non-ferrousmaterials and correlation of erosion data with erosion models / Harsha A.P.,Bhaskar D.K.
// Materials and Design. – 2008. - No 29. - pp. 1745–1754.65.Hayashi, N. Development of new testing method by centrifugal erosiontester at elevated temperature / Hayashi N., Kagimoto Y., Notomi A., Takeda Y.,Kato K. // Wear. – 2005. - No 258. - pp. 443–457.17466.Jain, R. K. Modeling of Material Removal and Surface Roughness inAbrasive Flow Machining Process / Jain R. K., Jain V. K., Dixit P. M. // Int. J.Mach.
Tools Manufacture. – 1999. - No 39. - pp. 1903–1923.67.Jensen, J.W. The development of an accelerated testing facility for the studyof deposits in land based gas turbine engines / Jensen J.W. // Brigham YoungUniversity Report. - 2004. – 119 p.68.Joseph, A. A transition state model for predicting the rate of erosive wear ofductile materials by solid particles / Joseph A., Humphrey C. // Wear. – 1980.
–No 65. - pp. 207 – 214.69.Joseph, D.D. Lift correlations from direct numerical simulation of solid-liquid flow / Joseph D.D. // Proc. Fourth International Conference on MultiphaseFlow. 2001. - No. 385. – pp. 1-11.70.Kablov, E.N. Ion-plasma protective coatings for gas-turbine engine blades /Kablov E.N., Muboyadzhyan S. A., Budinovskii S. A., Lutsenko A. N. // RussianMetallurgy (Metally). – 2007. - No.
5. - pp. 364–372.71.Karakama, K. Characterization of the deposition and transport of magnetiteparticles in supercritical water / Karakama K., Rogak S.N., Alfantazi A. // J. ofSupercritical Fluids. – 2012. – No 71. - pp. 11– 18.72.Kleis, I. Solid Particle Erosion: Occurrence, Prediction and Control / KleisI., Kulu P. // 2008. - 203 p.73.Klimpel, A. The abrasive and erosive wear resistance of cermetal deposits /Klimpel A., Rzeźnikiewicz A., Kik T. // 3rd International Conference on Integrity,Reliability and Failure.
- 20-24 July 2009. - pp. 1-9.74.Kopylov, A.A. Vibration-gas-abrasive wear resistance of turbine compressorblades / Kopylov A.A., Veksler Y.G., Styazhkin V.A., Paleeva S.Y., Paderov A.N.// Protection of Metals. – 2000. - No 36. - pp. 189-191.75.Kuki, J. Numerical simulation of sand erosion phenomena on turbine bladesurface / Kuki J., T Toda, Yamamoto M. // ECCOMAS. - 24— 28 July 2004.17576.Laguna-Camacho, J.R. Solid particle erosion of AISI 304, 316 and 420stainless steels / Laguna-Camacho J.R., Marquina-Chavez A., Mendez J.V., ViteTorres M., Gallardo-Hernandez E.A.
// Wear. – 2013. – No 301. - pp. 1–8.77.Lee, T.C. Mechanism of ultrasonic machining of ceramic composites / LeeT.C., Chan C.W. // Journal of Materials Processing Technology. – 1997. - No 71. pp. 95–201.78.Levin, B.F. Modeling Solid particle erosion of ductile alloys / Levin B.F.,Vecchio K.S., Dupont J.N., Marder A.R. // Metallurgical and materialstransactions. – 1999. - No 30a. - pp.
1763-1774.79.Levy, A.V. Elevated temperature erosion of steels / Levy A.V., Levy J.Y.,Patterson J. // Wear. – 1986. - No 108. - pp.43 – 60.80.Li, Y. Unsteady numerical simulation of steam-solid two-phase flow in thegoverning stage of a steam turbine / Li Y., Yan P., Han W. // Journal of ThermalScience. – 2009. – No 18. - pp. 313−320.81.Manish, R. Elevated temperature erosive wear of metallic materials / ManishR.
// Journal Of Physics D: Applied Physics. – 2006. - No 39. – pp. 101–124.82.Martinella, R. Solid particle erosion in electric power plants / Martinella R.// Vibration and Wear in High Speed Rotating Machinery. – 1990. - pp. 339-383.83.Maughan, J.R. Development of the dense pack steam turbine: a new designmethodology for increased efficiency / Maughan J.R., Willey L.D., Hil J.M., GoelS.
// Proceedings of the International Joint Power Generation Conference &Exposition. - 23-26 July 2000. – pp. 1-11.84.Muboyadzhyan, S.A. Erosion-resistant coatings for gas turbine compressorblades / Muboyadzhyan S.A. // Russian Metallurgy (Metally). – 2009. - No 3. pp. 183–196.85.Murphy, S.R. Solid particle erosion of steam turbines components:Workshop / Murphy S.R. – 1989. - 370 p.86.Neelesh, K.J.
Modeling of material removal in mechanical type advancedmachining process: a state of art review / Neelesh K.J., Vijaay K.J.// InternationalJournal of Machine Tools & Manufacture. – 2001. - No 41. - pp. 573–1635.17687.Nsoesie, S. Analytical modeling of solid-particle erosion of stellite alloys incombination with experimental investigation / Nsoesie S., Liu R., Chen K.Y., YaoM.X. // Wear.
– 2014. – No 309. - pp. 226–232.88.Paul, S. Analytical and experimental modeling of abrasive water jet cuttingof ductile materials / Paul S., Hoogstrate A.M., Lutterwelt C.A., H Kals J.J. //Journal of Materials Processing Technology. – 1998. - No 73.
- pp. 189–199.89.Pei, Z.J. Modeling of ductil mode material removal in rotary ultrasonicmachining / Pei Z.J., Perreira P.M. // International Journal of Machinery ToolManufacture. – 1998. - No 38. - pp. 1399–1418.90.Pepi, M. Solid particle erosion testing of helicopter rotor blade materials /Pepi M., Squillacioti R., Pfledderer L., Phelps A. // Journal of Failure Analysis andPrevention. – 2012. - No 12. - pp.
96–108.91.Petrica, M., Badisch E., Peinsitt T. Abrasive wear mechanisms and theirrelation to rock properties / Petrica M., Badisch E., Peinsitt T. // Wear. – 2013. –No 308. - pp. 86–94.92.Polezhaev, Y.V. A Model for calculating the erosion of a composite material/ Polezhaev Y.V., Romanchenkov V.P., Chirkov I.V., Shebeko V.N. // InzhenernoFizicheskii Zhurnal. – 1979. – No 37. – pp. 395-404.93.Richardson, G.Y. Erosion testing of coatings for V-22 aircraft applications /Richardson G.Y., Lei C.S., Tabakoff W.
// International Journal of RotatingMachinery. – 2003. – No 9. - pp. 35–40.94.Rudinger, G. Flow of solid particles in gases / Rudinger G. //AGARDograph. – 1976. - No 222. - 102 p.95.Ryzhenkov, A.V. The investigation of construction materials and protectivecoatings wear resistance to solid particle erosion / Ryzhenkov A.V., KachalinG.V., Mednikov A.F., Tkhabisimov A.B. // Modern Applied Science. – 2015. Vol. 9. - No.
4. - рр. 85-95.96.Schofield, P. Steam turbine sustained efficiency / Schofield P. // GER-3750C. – 1996. - 18 p.17797.Sharma, M.C. Effect of metal-spraying and shot peening on abrasive wear ofcarbon steel / Sharma M.C, Mod S.C. // Conference Proceedings: ICSP-9. – 2005.– pp. 75-8098.Shimizu, K. Solid particle erosion and mechanical properties of stainlesssteels at elevated temperature / Shimizu K., Xinba Y., Araya S. // Wear. – 2011. –No 271. - pp. 1357– 1364.99.Patnaik, A. Solid particle erosion wear characteristics of fiber and particulatefilled polymer composites: A review / Patnaik A., Satapathy A., Chand N.,Barkoula N.M., Biswas S. // Wear. – 2010. – No 268. – pp. 249–263.100.