Диссертация (1149735), страница 18
Текст из файла (страница 18)
Полученные результаты указывают на перспективность работ по повышениювязкости аморфных сплавов путём применения метода ИПД, но требуютсядальнейшие исследования влияния режимов ИПД-обработки и подбора исходногосостояния аморфных сплавов на модификацию их структуры и свойств.113СПИСОК ЛИТЕРАТУРЫ1. Klement W., Willens R.H., Duwez P. Non-crystalline structure in solidified GoldSilicon alloys // Nature, 1960.
Vol. 187. №. 4740. P. 869-870.2. Chen H.S. Thermodynamic considerations on the formation and stability of metallicglasses // Acta Metallurgica, 1974. Vol. 22. №. 12. P. 1505-1511.3. Kui H.W., Greer A.L., Turnbull D. Formation of bulk metallic glass by fluxing //Applied Physics Letters, 1984. Vol. 45. №. 6. P. 615-616.4.
Inoue A., Zhang T., Masumoto T. Al–La–Ni Amorphous Alloys with a WideSupercooled Liquid Region // Materials Transactions, JIM, 1989. Vol. 30. №. 12. P.965-972.5. Inoue A., Kato A., Masumoto T., Zhang T., Kim S.G. Mg-Cu-Y amorphous alloys withhigh mechanical strengths produced by a metallic mold casting method // MaterialsTransactions, JIM, 1991. Vol.
32. №. 7. P. 609-616.6. Zhang T., Inoue A., Masumoto T. Amorphous Zr-Al-TM (TM=Co, Ni, Cu) alloys withsignificant supercooled liquid region of over 100 K // Materials Transactions, JIM.1991. Vol. 32. №. 11. P. 1005-1010.7. Inoue A., Zhang T., Nishiyama N., Ohba K., Masumoto T. Preparation of 16 mmdiameter rod of amorphous Zr65Al7.5Ni10Cu17.5 alloy // Materials Transactions, JIM,1993. Vol. 34. №.
12. P. 1234-1237.8. PekerA.,JohnsonW.L.Ahighlyprocessablemetallicglass:Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 // Applied Physics Letters, 1993. Vol. 63. №. 17. P. 23422344.9. Inoue A., Nishiyama N., Kimura H. Preparation and thermal stability of bulkamorphous Pd40Cu30Ni10P20 alloy cylinder of 72 mm in diameter // MaterialsTransactions, JIM, 1997. Vol. 38. №. 2. P. 179-183.11410. Guo F.Q., Poon S.J., Shiflet G.J. CaAl-based bulk metallic glasses with high thermalstability // Applied Physics Letters, 2004.
Vol. 84. №. 1. P. 37-39.11. Pu J., Wang J.-F., Xiao J.-Z., Cui K. Formation and crystallization of bulk Pd82Si18amorphous alloys // Transactions of Nonferrous Metals Society of China (EnglishEdition), 2003. Vol. 13. №. 5. P. 1056-1061.12.
Xu D., Lohwongwatana B., Duan G., Johnson W.L., Garland C. Bulk metallic glassformation in binary Cu-rich alloy series - Cu100-xZrx (x=34, 36, 38.2, 40 at.%) andmechanical properties of bulk Cu64Zr36 glass // Acta Materialia, 2004. Vol. 52. №.9. P. 2621-2624.13. Löffler J.F. Bulk metallic glasses // Intermetallics, 2003.
Vol. 11. №. 6. P. 529-540.14. Inoue A. Bulk Glassy Alloys: Historical Development and Current Research //Engineering, 2015. Vol. 1. №. 2. P. 185-191.15. Ediger M.D., Angell C.A., Nagel S.R. Supercooled liquids and glasses // Journal ofPhysical Chemistry, 1996. Vol. 100. №. 31. P. 13200-13212.16.
Suryanarayana C., Inoue A. Bulk Metallic Glasses. Boca Raton: CRC Press, 2010.565 P.17. Turnbull D. Under what conditions can a glass be formed? // Contemporary Physics,1969. Vol. 10. №. 5. P. 473-488.18. Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys //Acta Materialia, 2000. Vol.
48. №. 1. P. 279-306.19. Greer A.L. Metallic glasses // Science, 1995. Vol. 267. №. 5206. P. 1947-1953.20. Inoue A., Shinohara Y., Yokoyama Y., Masumoto T. Solidification analyses of bulkyZr60Al10Ni10Cu15Pd5 glass produced by casting into wedge-shape copper mold //Materials Transactions, JIM, 1995.
Vol. 36. №. 10. P. 1276-1281.21. Spaepen F. A microscopic mechanism for steady state inhomogeneous flow inmetallic glasses // Acta Metallurgica, 1977. Vol. 25. №. 4. P. 407-415.22. Argon A.S. Plastic deformation in metallic glasses // Acta Metallurgica, 1979. Vol.27. №. 1. P. 47-58.23. Schuh C.A., Hufnagel T.C., Ramamurty U. Mechanical behavior of amorphous alloys// Acta Materialia, 2007.
Vol. 55. №. 12. P. 4067-4109.11524. Cohen M.H., Turnbull D. Molecular transport in liquids and glasses // The Journal ofChemical Physics, 1959. Vol. 31. №. 5. P. 1164-1169.25. Megusar J., Argon A.S., Grant N.J. Plastic flow and fracture in Pd80Si20 near Tg //Materials Science and Engineering, 1979.
Vol. 38. №. 1. P. 63-72.26. Inoue A., Shen B.L., Chang C.T. Fe- and Co-based bulk glassy alloys with ultrahighstrength of over 4000 MPa // Intermetallics, 2006. Vol. 14. №. 8-9. P. 936-944.27. Shen B., Inoue A. Enhancement of the fracture strength and glass-forming ability ofCoFeTaB bulk glassy alloy // Journal of Physics Condensed Matter, 2005. Vol. 17.
№.31. P. 5647-5653.28. Zhang Z.F., Eckert J., Schultz L. Difference in compressive and tensile fracturemechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass // Acta Materialia, 2003.Vol. 51. №. 4. P. 1167-1179.29. Pugh S.F. XCII. Relations between the elastic moduli and the plastic properties ofpolycrystalline pure metals // The London, Edinburgh, and Dublin PhilosophicalMagazine and Journal of Science, 1954. Vol. 45. №. 367. P.
823-843.30. Cottrell A.H. The art of simplification in materials science // MRS Bulletin, 1997.Vol. 22. №. 5. P. 15-19.31. Lewandowski J.J., Wang W.H., Greer A.L. Intrinsic plasticity or brittleness ofmetallic glasses // Philosophical Magazine Letters, 2005. Vol. 85. №. 2. P. 77-87.32. Lewandowski J.J., Shazly M., Nouri A.S. Intrinsic and extrinsic toughening ofmetallic glasses // Scripta Materialia, 2006. Vol.
54. №. 3. P. 337-341.33. Liu Y.H., Wang G., Wang R.J., Zhao D.Q., Pan M.X., Wang W.H. Super plastic bulkmetallic glasses at room temperature // Science, 2007. Vol. 315. №. 5817. P. 13851388.34. Kawashima A., Zeng Y., Fukuhara M., Kurishita H., Nishiyama N., Miki H., InoueA. Mechanical properties of a Ni60Pd20P17B3 bulk glassy alloy at cryogenictemperatures // Materials Science and Engineering: A, 2008.
Vol. 498. №. 1-2. P. 475481.35. Zhang T., Tsai A.P., Inoue A., Masumoto T. Production of amorphous alloy balloon// Boundary, 1991. Vol. 7. №. 9. P. 39-43.11636. Johnson W.L. Bulk Glass-Forming Metallic Alloys: Science and Technology // MRSBulletin, 1999. Vol. 24. №. 10. P. 42-56.37. Kakiuchi H., Inoue A., Onuki M., Takano Y., Yamaguchi T. Application of Zr-basedbulk glassy alloys to golf clubs // Materials Transactions, 2001. Vol. 42. №.
4. P. 678681.38. http://www.liquidmetal.com.39. Oak J.-J., Louzguine-Luzgin D.V., Inoue A. Fabrication of Ni-free Ti-based bulkmetallic glassy alloy having potential for application as biomaterial, and investigationof its mechanical properties, corrosion, and crystallization behavior // Journal ofMaterials Research, 2007. Vol. 22. №.
5. P. 1346-1353.40. Huang L., Cao Z., Meyer H.M., Liaw P.K., Garlea E., Dunlap J.R., Zhang T., He W.Responses of bone-forming cells on pre-immersed Zr-based bulk metallic glasses:Effects of composition and roughness // Acta Biomaterialia, 2011. Vol. 7. №. 11. P.395-405.41. Cao J.D., Kirkland N.T., Laws K.J., Birbilis N., Ferry M. Ca-Mg-Zn bulk metallicglasses as bioresorbable metals // Acta Biomaterialia, 2012.
Vol. 8. №. 6. P. 23752383.42. Li H.F., Zheng Y.F. Recent advances in bulk metallic glasses for biomedicalapplications // Acta Biomaterialia, 2016. Vol. 36. P. 1-20.43. Kumar G., Desai A., Schroers J. Bulk metallic glass: The smaller the better //Advanced Materials, 2011. Vol. 23. №. 4. P. 461-476.44. Greer A.L., Rutherford K.L., Hutchings I.M. Wear resistance of amorphous alloysand related materials // International Materials Reviews, 2002. Vol. 47. №. 2.
P. 87112.45. Telford M. The case for bulk metallic glass // Materials Today, 2004. Vol. 7. №. 3. P.36-43.46. https://genesismission.jpl.nasa.gov/47. Gleiter H. Nanocrystalline materials // Progress in Materials Science, 1989. Vol. 33.№. 4. P. 223-315.11748. Jing J., Krämer A., Birringer R., Gleiter H., Gonser U. Modified atomic structure ina PdFeSi nanoglass. A Mössbauer study // Journal of Non-Crystalline Solids, 1989.Vol.
113. №. 2-3. P. 167-170.49. Gleiter H. Nanoglasses: A new kind of noncrystalline materials // Beilstein Journal ofNanotechnology, 2013. Vol. 4. №. 1. P. 517-533.50. Fang J.X., Vainio U., Puff W., Würschum R., Wang X.L., Wang D., Ghafari M., JiangF., Sun J., Hahn H., Gleiter H. Atomic structure and structural stability of Sc75Fe25nanoglasses // Nano Letters, 2012. Vol.
12. №. 1. P. 458-463.51. Chen N., Frank R., Asao N., Louzguine-Luzgin D.V., Sharma P., Wang J.Q., XieG.Q., Ishikawa Y., Hatakeyama N., Lin Y.C., Esashi M., Yamamoto Y., Inoue A.Formation and properties of Au-based nanograined metallic glasses // Acta Materialia,2011. Vol. 59.
№. 16. P. 6433-6440.52. Sniadecki Z., Wang D., Ivanisenko Yu., Chakravadhanula V.S.K., Kübel C., HahnH., Gleiter H. Nanoscale morphology of Ni50Ti45Cu5 nanoglass // MaterialsCharacterization, 2016. Vol. 113. P. 26-33.53. Liu J.W., Cao Q.P., Chen L.Y., Wang X.D., Jiang J.Z. Shear band evolution andhardness change in cold-rolled bulk metallic glasses // Acta Materialia, 2010. Vol.
58.№. 14. P. 4827-4840.54. Shao H., Xu Y., Shi B., Yu C., Hahn H., Gleiter H., Li J. High density of shear bandsand enhanced free volume induced in Zr70Cu20Ni10 metallic glass by high-energyball milling // Journal of Alloys and Compounds, 2013. Vol. 548.
P. 77-81.55. Wang X.L., Jiang F., Hahn H., Li J., Gleiter H., Sun J., Fang J.X. Plasticity of ascandium-based nanoglass // Scripta Materialia, 2015. Vol. 98. P. 40-43.56. Volkert C.A., Donohue A., Spaepen F. Effect of sample size on deformation inamorphous metals // Journal of Applied Physics, 2008. Vol. 103.57. Lewandowski J.J., Greer A.L. Temperature rise at shear bands in metallic glasses //Nature Materials, 2006. Vol. 5. P. 15-18.58. Masumoto T., Maddin R. Structural stability and mechanical properties of amorphousmetals // Materials Science and Engineering, 1975.
![](https://s.studizba.com/z.php?f=/templates/si/i/noavatar.png&w=100&h=100&t=1"){kind=avatar}
