A little bit of physics (Несколько текстов для зачёта), страница 3

Because ceramic materials are harder and have better corrosion resistance than most metals, manufacturers often coat metal with ceramic enamel. Manufacturers apply ceramic enamel by injecting a compressed gas containing ceramic powder into the flame of a hydrocarbon-oxygen torch burning at about 2500° C (about 4500° F). The semimolten powder particles adhere to the metal, cooling to form a hard enamel. Household appliances, such as refrigerators, stoves, washing machines, and dryers, are often coated with ceramic enamel.

Plastics

INTRODUCTION

Plastics, materials made up of large, organic (carbon-containing) molecules that can be formed into a variety of products. The molecules that compose plastics are long carbon chains that give plastics many of their useful properties. In general, materials that are made up of long, chainlike molecules are called polymers. The word plastic is derived from the words plasticus (Latin for “capable of molding”) and plastikos (Greek “to mold,” or “fit for molding”). Plastics can be made hard as stone, strong as steel, transparent as glass, light as wood, and elastic as rubber. Plastics are also lightweight, waterproof, chemical resistant, and produced in almost any color. More than 50 families of plastics have been produced, and new types are currently under development.

Like metals, plastics come in a variety of grades. For instance, nylons are plastics that are separated by different properties, costs, and the manufacturing processes used to produce them. Also like metals, some plastics can be alloyed, or blended, to combine the advantages possessed by several different plastics. For example, some types of impact-resistant (shatterproof) plastics and heat-resistant plastics are made by blending different plastics together.

Plastics are moldable, synthetic (chemically-fabricated) materials derived mostly from fossil fuels, such as oil, coal, or natural gas. The raw forms of other materials, such as glass, metals, and clay, are also moldable. The key difference between these materials and plastics is that plastics consist of long molecules that give plastics many of their unique properties, while glass, metals, and clay consist of short molecules.

USES OF PLASTICS

Plastics are indispensable to our modern way of life. Many people sleep on pillows and mattresses filled with a type of plastic—either cellular polyurethane or polyester. At night, people sleep under blankets and bedspreads made of acrylic plastics, and in the morning, they step out of bed onto polyester and nylon carpets. The cars we drive, the computers we use, the utensils we cook with, the recreational equipment we play with, and the houses and buildings we live and work in all include important plastic components. The average 1998-model car contains almost 136 kg (almost 300 lb) of plastics—nearly 12 percent of the vehicle’s overall weight. Telephones, textiles, compact discs, paints, plumbing fixtures, boats, and furniture are other domestic products made of plastics. In 1979 the volume of plastics produced in the United States surpassed the volume of domestically produced steel.

Plastics are used extensively by many key industries, including the automobile, aerospace, construction, packaging, and electrical industries. The aerospace industry uses plastics to make strategic military parts for missiles, rockets, and aircraft. Plastics are also used in specialized fields, such as the health industry, to make medical instruments, dental fillings, optical lenses, and biocompatible joints.

GENERAL PROPERTIES OF PLASTICS

Plastics possess a wide variety of useful properties and are relatively inexpensive to produce. They are lighter than many materials of comparable strength, and unlike metals and wood, plastics do not rust or rot. Most plastics can be produced in any color. They can also be manufactured as clear as glass, translucent (transmitting small amounts of light), or opaque (impenetrable to light).

Plastics have a lower density than that of metals, so plastics are lighter. Most plastics vary in density from 0.9 to 2.2 g/cm³ (0.45 to 1.5 oz/cu in), compared to steel’s density of 7.85 g/cm³ (5.29 oz/cu in). Plastic can also be reinforced with glass and other fibers to form incredibly strong materials. For example, nylon reinforced with glass can have a tensile strength (resistance of a material to being elongated or pulled apart) of up to 165 Mega Pascal (24,000 psi).

Plastics have some disadvantages. When burned, some plastics produce poisonous fumes. Although certain plastics are specifically designed to withstand temperatures as high as 288° C (550° F), in general plastics are not used when high heat resistance is needed. Because of their molecular stability, plastics do not easily break down into simpler components. As a result, disposal of plastics creates a solid waste problem.

CHEMISTRY OF PLASTICS

Plastics consist of very long molecules each composed of carbon atoms linked into chains. One type of plastic, known as polyethylene, is composed of extremely long molecules that each contain over 200,000 carbon atoms. These long, chainlike molecules give plastics unique properties and distinguish plastics from materials, such as metals, that have short, crystalline molecular structures.

Although some plastics are made from plant oils, the majority are made from fossil fuels. Fossil fuels contain hydrocarbons (compounds containing hydrogen and carbon), which provide the building blocks for long polymer molecules. These small building blocks, called monomers, link together to form long carbon chains called polymers. The process of forming these long molecules from hydrocarbons is known as polymerization. The molecules typically form viscous, sticky substances known as resins, which are used to make plastic products.

Ethylene, for example, is a gaseous hydrocarbon. When it is subjected to heat, pressure, and certain catalysts (substances used to enable faster chemical reactions), the ethylene molecules join together into long, repeating carbon chains. These joined molecules form a plastic resin known as polyethylene.

Joining identical monomers to make carbon chains is called addition polymerization, because the process is similar to stringing many identical beads on a string. Plastics made by addition polymerization include polyethylene, polypropylene, polyvinyl chloride, and polystyrene. Joining two or more different monomers of varying lengths is known as condensation polymerization, because water or other by-products are eliminated as the polymer forms. Condensation polymers include nylon (polyamide), polyester, and polyurethane.

The properties of a plastic are determined by the length of the plastic’s molecules and the specific monomer present. For example, elastomers are plastics composed of long, tightly twisted molecules. These coiled molecules allow the plastic to stretch and recoil like a spring. Rubber bands and flexible silicone caulking are examples of elastomers.

The carbon backbone of polymer molecules often bonds with smaller side chains consisting of other elements, including chlorine, fluorine, nitrogen, and silicon. These side chains give plastics some distinguishing characteristics. For example, when chlorine atoms substitute for hydrogen atoms along the carbon chain, the result is polyvinyl chloride, one of the most versatile and widely used plastics in the world. The addition of chlorine makes this plastic harder and more heat resistant.

Different plastics have advantages and disadvantages associated with the unique chemistry of each plastic. For example, longer polymer molecules become more entangled (like spaghetti noodles), which gives plastics containing these longer polymers high tensile strength and high impact resistance. However, plastics made from longer molecules are more difficult to mold.

THERMOPLASTICS AND THERMOSETTING PLASTICS

All plastics, whether made by addition or condensation polymerization, can be divided into two groups: thermoplastics and thermosetting plastics. These terms refer to the different ways these types of plastics respond to heat. Thermoplastics can be repeatedly softened by heating and hardened by cooling. Thermosetting plastics, on the other hand, harden permanently after being heated once.

The reason for the difference in response to heat between thermoplastics and thermosetting plastics lies in the chemical structures of the plastics. Thermoplastic molecules, which are linear or slightly branched, do not chemically bond with each other when heated. Instead, thermoplastic chains are held together by weak van der Waal forces (weak attractions between the molecules) that cause the long molecular chains to clump together like piles of entangled spaghetti. Thermoplastics can be heated and cooled, and consequently softened and hardened, repeatedly, like candle wax. For this reason, thermoplastics can be remolded and reused almost indefinitely.

Thermosetting plastics consist of chain molecules that chemically bond, or cross-link, with each other when heated. When thermosetting plastics cross-link, the molecules create a permanent, three-dimensional network that can be considered one giant molecule. Once cured, thermosetting plastics cannot be remelted, in the same way that cured concrete cannot be reset. Consequently, thermosetting plastics are often used to make heat-resistant products, because these plastics can be heated to temperatures of 260° C (500° F) without melting.

The different molecular structures of thermoplastics and thermosetting plastics allow manufacturers to customize the properties of commercial plastics for specific applications. Because thermoplastic materials consist of individual molecules, properties of thermoplastics are largely influenced by molecular weight. For instance, increasing the molecular weight of a thermoplastic material increases its tensile strength, impact strength, and fatigue strength (ability of a material to withstand constant stress). Conversely, because thermosetting plastics consist of a single molecular network, molecular weight does not significantly influence the properties of these plastics. Instead, many properties of thermosetting plastics are determined by adding different types and amounts of fillers and reinforcements, such as glass fibers.

Thermoplastics may be grouped according to the arrangement of their molecules. Highly aligned molecules arrange themselves more compactly, resulting in a stronger plastic. For example, molecules in nylon are highly aligned, making this thermoplastic extremely strong. The degree of alignment of the molecules also determines how transparent a plastic is. Thermoplastics with highly aligned molecules scatter light, which makes these plastics appear opaque. Thermoplastics with semialigned molecules scatter some light, which makes most of these plastics appear translucent. Thermoplastics with random (amorphous) molecular arrangement do not scatter light and are clear. Amorphous thermoplastics are used to make optical lenses, windshields, and other clear products.

MANUFACTURING PLASTIC PRODUCTS

The process of forming plastic resins into plastic products is the basis of the plastics industry. Many different processes are used to make plastic products, and in each process, the plastic resin must be softened or sufficiently liquefied to be shaped.

Forming Thermoplastics

Although some processes are used to manufacture both thermoplastics and thermosetting plastics, certain processes are specific to forming thermoplastics.

Injection Molding

Injection molding uses a piston or screw to force plastic resin through a heated tube into a mold, where the plastic cools and hardens to the shape of the mold. The mold is then opened and the plastic cast removed. Thermoplastic items made by injection molding include toys, combs, car grills, and various containers.

Extrusion

Extrusion is a continuous process, as opposed to all other plastic production processes, which start over at the beginning of the process after each new part is removed from the mold. In the extrusion process, plastic pellets are first heated in a long barrel. In a manner similar to that of a pasta-making or sausage-stuffing machine, a rotating screw then forces the heated plastic through a die (device used for forming material) opening of the desired shape.

As the continuous plastic form emerges from the die opening, it is cooled and solidified, and the continuous plastic form is then cut to the desired length. Plastic products made by extrusion include garden hoses, drinking straws, pipes, and ropes. Melted thermoplastic forced through extremely fine die holes can be cooled and woven into fabrics for clothes, curtains, and carpets.

Blow Molding